Baxton Studio BBT 6662 A1 User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL 2 PCS
DCENTER RAIL 1 PC
ECENTER SUPPORT 2 PCS
FCENTER SUPPORT LEG 3 PCS
GBED SLAT 26 PCS
HBED LEG 4 PCS
IHEADBOARD & FOOTBOARD SUPPORT WOOD 2 PCS
HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 40mm 4 PCS
2JCBB BOLT M8 x 40mm 6 PCS
3WOOD SCREW M3.5 x 16mm 8 PCS
4WOOD SCREW M4 x 20mm 2 PCS
5M8 FLAT WASHER 6 PCS
6M8 SPRING WASHER 6 PCS
7BED SLAT SIDE FITTER 26 PCS
8BED SLAT CENTER FITTER 13 PCS
9M4 ALLEN KEY (BALL SHAPE) 1 PC
10 M5 ALLEN KEY (BALL SHAPE) 1 PC
MODEL : BBT 6662 A1 QUEEN BED
STEP 2
1 of 2
x 2
x 3
x 3
I
H
I
1
9
D
F
A
I
62
5
10
10
2
6
5
I
B
STEP 1
H
STEP A
STEP B
x 2
x 2
Remark : Big hole face up,
small hole face down.

Palm
Palm
ASSEMBLY INSTRUCTIONS 2 of 2
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
A
10
CD
A
STEP A
STEP B
STEP 3 STEP 4 STEP 5
STEP 6 STEP 7
G
7
G
8
G
7
G
8
G
7
Note: Assemble (E) vertically as picture shown.
CE
3
4
STEP A
STEP B
x 2
x 4
x 2

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION QTY
A CUSHION 1 PC
B LEG 4 PCS
HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBB BOLT M8 x 50mm 8 PCS
2 M8 SPRING WASHER 8 PCS
3M8 FLAT WASHER 8 PCS
4M5 ALLEN KEY (BALL SHAPE) 1 PC
STEP 1
1 of 1
STEP 3
STEP 2
A
B
1
2
3
4
x4