Baxton Studio Eileen SW 8522-F User manual

Attach the support side leg (P8)
to the side rail (P6) and side rail
hole (P7) using hardware:
D = 8pcs
G = 1pc
Fix the adjuster (J) to the
support side leg (P8) using
hardware:
J = 2pcs
E
WARNING!!
·Remove hardware from box and sort by size.
·Please check to see that hardware and parts are
present prior start of assembly.
·Please follow attached instruction in the same
sequence numbered to ensure fast and
easy assembly.
·Do not use this bed if any part is broken,torn
or missing.
·The assembly of this product requires two
people.
·Do not use any power tools as this may damage
the frame and will invalidate any claim.
HARDWARE LIST
P1
P2
Headboard Upper Post
AM6 X 60MM JCBC
B
SW 8522 - F/Q/K
SW8120Q/K
= 6pcs
C
D
E
F
G
H
I
M8 X 16MM JCBB = 8pcs
BARREL NUT = 10pcs
= 1pc
ALLEN KEY M5 = 1pc
M4 X 25MM SCREW = 8pcs
J
P3
P4
P5
P6
P8
P9
P10
P11
= L-1pc
= R-1pc
Headboard Lower Post = L-1pc
= R-1pc
= 1pc
Headboard Bottom Rail = 1pc
Footboard = 1pc
Side Rail = L-1pc
= R-1pc
Support Side Leg = 2pcs
Center Rail = 2pcs
Bed Slats = 16pcs
Support Leg = 4pcs
ADJUSTER = 6pcs
ALLEN KEY M4
M6 X 50MM JCBC = 4pcs
DG
M6 X 40MM JCBC = 6pcs
E
H
Attach the side rail (P6) to the
footboard (P5) using hardware:
E = 4pcs
H = 1pc
Headboard Panel
M6 X 30MM JCBC = 10pcs
K
F
J
Attach the headboard bottom rail (P4)
to the headboard lower post (P2). You
will need to use hardware:
F = 4pcs
G = 1pc
K = 4pcs
Attach the side rail hole (P7) to
the headboard bottom rail (P4)
using hardware:
E = 4pcs
H = 1pc
PAGE 1
PART LIST
1.
2.
3.
4.
P7 Side Rail (HOLE) = L-1pc
= R-1pc
REV_22/11/2022
H
KM6 X 80MM JCBC = 4pcs

Lay the bed slats (P10) between
the side rail (P6) and side rail hole
(P7) using hardware:
I = 8pcs
Attach the support leg (P11) to
the center rail (P9) and bed slats
(P10) using hardware:
B = 4pcs
G = 1pc
J
I
GBFix the adjuster (J) to the
support leg (P11) using
hardware:
J = 4pcs
D
G
C
CG
FA
G
Attach the headboard lower
post (P2) to the headboard
upper post (P1) using hardware:
C = 2pcs
D = 2pcs
G = 1pc
And then, attach the headboard
upper post (P1) to the side rail
hole (P7) using hardware:
C = 4pcs
G = 1pc
Attach the headboard panel (P3)
to the headboard upper post (P1)
using hardware:
A = 6pcs
F = 6pcs
G = 1pc
WARNING!!
·Remove hardware from box and sort by size.
·Please check to see that hardware and parts are
present prior start of assembly.
·Please follow attached instruction in the same
sequence numbered to ensure fast and
easy assembly.
·Do not use this bed if any part is broken,torn
or missing.
·The assembly of this product requires two
people.
·Do not use any power tools as this may damage
the frame and will invalidate any claim.
SW8120Q/K
PAGE 2
5.
6.
7.
8.
REV_22/11/2022
**Apply pressure with your knee to
the side rail whilst attaching the
slats to ensure that the slats are
flush against the inside of side rail**
HARDWARE LIST
P1
P2
Headboard Upper Post
AM6 X 60MM JCBC
B
= 6pcs
C
D
E
F
G
H
I
M8 X 16MM JCBB = 8pcs
BARREL NUT = 10pcs
= 1pc
ALLEN KEY M5 = 1pc
M4 X 25MM SCREW = 8pcs
J
P3
P4
P5
P6
P8
P9
P10
P11
= L-1pc
= R-1pc
Headboard Lower Post = L-1pc
= R-1pc
= 1pc
Headboard Bottom Rail = 1pc
Footboard = 1pc
Side Rail = L-1pc
= R-1pc
Support Side Leg = 2pcs
Center Rail = 2pcs
Bed Slats = 16pcs
Support Leg = 4pcs
ADJUSTER = 6pcs
ALLEN KEY M4
M6 X 50MM JCBC = 4pcs
M6 X 40MM JCBC = 6pcs
Headboard Panel
M6 X 30MM JCBC = 10pcs
PART LIST
P7 Side Rail (HOLE) = L-1pc
= R-1pc
KM6 X 80MM JCBC = 4pcs