Baxton Studio BS-322 User manual

Step Pictures Instruction
1 place the seat upside down
2Unscrew 4 of the screws that
attach the seat with the metal pole
3Lift the pole an inch from the
wooden seat
4Look for 4 washers provided in
the package
5
Put the first two washers together
(two plies) Then, place the
washers in between the metal
pole and wood piece Make sure
that you can screw the metal pole
and the washers to the back of
the seat
BS-322: Assembly Instructions

6
Then, repeat step 5 at a spot
facing diagonally Please make
sure that there is visible gap in
between the metal pole and the
back of the seat
7Next, insert the piston into the
metal pole
8
Insert the ring into the piston and
attach the base Make sure that it
is secure tightly
9
Then, place the bar stool
upstraight and the bar stool is now
ready to be adjusted to your
preferred position