Baxton Studio LYA20-103 User manual

CARE INSTRUCTIONS:
WIPE CLEAN WITH A DRY CLOTH.
DO NOT USE ABRASIVE MATERIALS
AND SOLVENTS. KEEP AWAY FROM WATER AND DIRECT SUNLIGHT. DO NOT PLACE HOT ITEMS SUCH
AS COFFEE CUPS DIRECTLY ON THE SURFACE. STORE IN A DRY PLACE. FOR INDOOR AND DOMESTIC
USE ONLY.
WARNING:
DO NOT STAND OR SIT ON THIS ITEM. DO NOT USE UNTIL ALL SCREWS ARE FIRMLY SECURED. USE
ONLY ON A FLAT SURFACE. ADULT ASS EMBLY REQUIRED. FAILURE TO FOLLOW THESE WARNINGS
COULD IN SERIOUS INJURY. MAXIMUM SAFE LOAD: 20KGS FOR TOP PANEL,10KGS FOR SHELF.

C
B
C
Begin assembly by attaching Part (3) & (4) to
Part (2) by inserting wooden dowel (A) and
securing with camlock (B) & (C)

Insert Part (8) to Part (2) &(3)&(4).
Attach Part (1) to Part (3)&(4)&(8) by
inserting wooden dowel (A)and male
camlock (B) .

Attach (K)to Part (5) & (6) by
securing with screw (H).
Attach (F) to Part (5)&(6) by aligning holes and securing with screw E.
Insert Part (5)(6) to Part (1)(2) by aligning holes .
Attach Part (1) to Part (3)(4) by
securing with female camlock (C).

Attach Part(7) to Part (1) by
securing with screw (L).
Rotate leg (9) to the bottom one by one by aligning hole.
Tighten each leg before turning assembled product
upside down .

Attach(G) to each corner by securing with
screw (D).Fix wall strap (I) to the product
by securing with screw (D) and
washer (J).
Drill hole on the wall.
Hammer (M) into the hole on
the wall.Fix wall strap (I) to (M)
by securing with screw (L) and
washer (J)