Baxton Studio Valery Modern & Contemporary BBT6740 User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
ASSEMBLY INSTRUCTIONS HARDWARE LIST
ITEM DESCRIPTION QTY
1WOOD DOWEL M8 X 30mm 4 PCS
2 JCBB BOLT M6 x 20mm 8 PCS
3 JCBB BOLT M6 x 40mm 10 PCS
4M6 FLAT WASHER 18 PCS
5M6 SPRING WASHER 8 PCS
6 JCBC BOLT M8 x 40mm 10 PC
7M8 FLAT WASHER 10 PCS
8M8 SPRING WASHER 10 PCS
9WOOD SCREW M3.5 x 16mm 8 PCS
10 WOOD SCREW M4 x 20mm 2 PCS
11 BED SLAT SIDE FITTER 26 PCS
12 BED SLAT CENTER FITTER 13 PCS
13 M4 ALLEN KEY (BALL SHAPE) 1 PC
14 M5 ALLEN KEY (BALL SHAPE) 1 PC
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD TOP 1 PC
BHEADBOARD WIND 2 PCS
CFOOTBOARD 1 PC
DSIDE RAIL (L&R) 2 PCS
ECENTER RAIL 1 PC
FCENTER SUPPORT LEG 3 PCS
GCENTER SUPPORT 2 PCS
HBED LEG 4 PCS
IBED SLAT 26 PCS
PAGE 1 OF 3
x 2
x 2
**Open the zip at the headboard backing and take out
headboard Wings.
x 1
1
A
687
x 4
STEP 1 STEP 2
E
H

10 PCS
18 PCS
10 PCS
10 PCS
26 PCS
13 PCS
ASSEMBLY INSTRUCTIONS PAGE 2 OF 3
2
13
54
H
D
NOTE :
Make sure the floor is
clean and smooth
when put down the bed
to prevent scratches.
D C
14
STEP 4.1
PAGE 1 OF 3
13
3
4B
786
STEP 4.2 X 2
A
C
STEP 3 STEP 4
STEP 5 STEP 6
14 Loosen the pre-inserted bolt on the
heardboard & footboard using Allen
key ball shape (14).

G
9
PAGE 2 OF 3 ASSEMBLY INSTRUCTIONS PAGE 3 OF 3
Palm
Palm
I
11
12
I
I
11
I
12
I
11
STEP 9.1
STEP 9.2
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
C
E
STEP 7.1
E
10
STEP 7 STEP 8
STEP 9 STEP 10
STEP 7.2