Bayer HealthCare Bai An Jie 2 User manual

User Guide
BLOOD GLUCOSE MONITORING SYSTEM
(Bai An Jie
®)
®
18211 NE 68th Street,
E120 Redmond, WA 98052
T425-881-5454
Breeze 2 Rebranding UG - Hong Kong
DATE:
CLIENT:
DESCRIPTION:
SCHAWK JOB#:
BAN#:
SKU#:
DIMENSIONS:
PRINTER SPEC:
V-0 ENGLISH (HONG KONG)
PROCESS CYAN
PROCESS MAGENTA
PROCESS YELLOW
PROCESS BLACK
COLORS
Avenir, Berthold
Akzidenz,
DFPGYaYi,
DFPGBiaoSong,
Futiger, Futura,
Helvetica, Times
FONTS
August 8, 2011
Bayer HealthCare
Breeze 2 Rebranding UG - English
907186
82076779 Rev. 07/11
N/A
6.0" (H) x 4.5" (W)
PUSG0494 REV F
®
82076779_BRZ2_UG_EN_FpBp_v0.indd ofc1
82076779_BRZ2_UG_EN_FpBp_v0.indd ofc1
8/8/11 12:45:16 PM
8/8/11 12:45:16 PM

1 3 2
b
a
www.bayerdiabetes.com
ASEASY AS 1-2-3...
1
Open meter,
insert 10-test disc, close meter.
2Pull (a) and
push (b) handle
to expose test strip.
3
Apply sample.
Smaller Blood Drop,
Faster Test Results, and
Increased Memory Capacity
TABLE OF CONTENTS
Bayer Customer Service: (852) 8100 6386
i
INTRODUCTION INTRODUCTION 1 A LOOK AT YOUR METER 2 EXPLANATION OF DISPLAY SYMBOLS 4 TESTING MATERIALS 6 EVERYDAY USE INSERTING A10-TEST DISC 7 RUNNING ABLOOD GLUCOSE TEST 10
MARKING A DELETED BLOOD TEST 18 UNDERSTANDING YOUR TEST RESULTS 19 ALTERNATIVE SITE TESTING 20
RUNNING ACONTROL TEST 22
MARKING A CONTROL TEST 24
BEYOND EVERYDAY USE RECALLING TEST RESULTS 26 VIEWING YOUR AVERAGES 27 CLEARING STORED TEST RESULTS 28 SETUP FUNCTION 29
SETTING THE TIME 29 SETTING THE DATE 30 SETTING THE BUZZER LEVEL 32 SETTING THE TIME FORMAT 33 SETTING THE DATE FORMAT 34
TRANSFERRING RESULTS TO ACOMPUTER 35 CLEANING YOUR METER 36 REPLACING THE BATTERY 37
82076779_BRZ2_UG_EN_FpBp_v0.indd ifc2-i
82076779_BRZ2_UG_EN_FpBp_v0.indd ifc2-i
8/8/11 12:45:18 PM
8/8/11 12:45:18 PM

TABLE OF CONTENTS
Bayer Customer Service: (852) 8100 6386
ii
www.bayerdiabetes.com
INTRODUCTION: Thank you for choosing the
޵щଥ
®(Bai An Jie®) blood
glucose monitoring system! We are proud to be your partner in helping you manage your diabetes. We understand that people who regularly check their blood glucose levels want a meter that is simple, straightforward and easy to use. As you use your
޵щଥ
(Bai An Jie ) system, you will appreciate the:
• No Coding™ technology of the test strips; • small sample volume; • fast reading time; • convenience of a 10-test disc; • simple “Pull and Push” step to begin testing; • user-friendly design. This ease of use comes with the added bonus of the reliability that you count on from Bayer. This user guide shows you how to use your
޵щଥ
(Bai An Jie )
system. It will answer any questions you might have and guide you through the testing process. It is here to help you! The user guide is divided into color-coded sections to help you easily find the information you need. See the Table of Contents for a complete list of topics. CAUTION: Before using any product to test your blood glucose (sugar), read all instructions carefully and practice the test.
TECHNICAL INFORMATION
SPECIFICATIONS 40
PERFORMANCE EVALUATIONS 41 SOLVING PROBLEMS SOLVING PROBLEMS 42 TROUBLESHOOTING AND ERROR CODES 43 CUSTOMER SERVICE 48 REPLACEMENT ITEMS 49 WARRANTY INFORMATION 50
The
޵щଥ
®(Bai An Jie®) blood glucose monitoring system (meter,
test strips and controls) is intended for self-testing by persons with diabetes and by healthcare professionals, to monitor the level of glucose in whole blood. The MICROLET®2lancing device is not suitable for use
by healthcare professionals. It must not be used on more than one person due to the risk of infection. The
޵щଥ
(Bai An Jie ) system is specific
for glucose and has been referenced to plasma/serum glucose.
INTRODUCTION
ii 1
82076779_BRZ2_UG_EN_FpBp_v0.indd ii-1
82076779_BRZ2_UG_EN_FpBp_v0.indd ii-1
8/8/11 12:45:20 PM
8/8/11 12:45:20 PM

2
Bayer Customer Service: (852) 8100 6386
3
www.bayerdiabetes.com
Screen
This is where
your test results
will be displayed.
Battery Holder
(side of meter)
Holds one
CR2032 lithium
battery (included).
On/Off
Button
Used to manually
turn the meter
on or off, check
the number of
strips and check
the date/time.
Data Port (side of meter) Insert cable here to allow communication between the meter and a personal computer.
Release Button Press to release and discard the used test strip. Meter Handle Use this handle to push out a test strip and automatically turn on the meter.
Up/ Down Buttons
Used to display additional results or options.
Accept Button
Used to accept changes made in the Setup mode.
Button Door Open
Open Latch Press in and pull up on the base to open the meter.
Back (Base)
of Meter
NOTE: Simply place the easy reference sticker
on the button door as shown. See the sheet of stickers provided in your meter package and select the language of your choice.
On/Off
Button
Used to manually
turn the meter
on or off, check
the number of
strips, and check
the date/time.
Memory
Button
Used to view your
blood glucose
results stored in
memory and to
view your test
result averages.
Setup
Button
Used to enter
the Setup mode
and easily change
the time,
date or
other features.
A LOOK AT YOUR
޵щଥ
®
(Bai An Jie
®
)METER:
Top End
of Meter
Release Button Test Strip Slot Button Door Open to expose meter buttons. Tab to Open Button Door
Tab to Open Button Door
82076779_BRZ2_UG_EN_FpBp_v0.indd 2-3
82076779_BRZ2_UG_EN_FpBp_v0.indd 2-3
8/8/11 12:45:20 PM
8/8/11 12:45:20 PM

4
Bayer Customer Service: (852) 8100 6386 www.bayerdiabetes.com
The result is not to be included in the averages
The volume of
the buzzer
EXPLANATION OF DISPLAY SYMBOLS:
A full display, as shown here, indicates that all elements in
the display are working properly. To view the full display,
press and hold the On/Off button ( ) or pull the meter
handle all the way out. Compare your meter to the display
shown here before you run each test. If there is a difference,
please see “Troubleshooting and Error Codes” on page 43.
Here is what each display element means:
The units of measure (mg/dL or mmol/L) for your blood glucose result
Where the time, date,
and AM/PM are displayed;
also the type of average
Here is what each display element means:
Additional
results and
options are
available by
pressing the
and
buttons
Battery is low or dead
Apply blood to
the test strip
The number
of test
strips left in
the disc
Temperature is too high or too low
Test result and error
codes are displayed here
Insert a new
test disc
The result is a control test
5
82076779_BRZ2_UG_EN_FpBp_v0.indd 4-5
82076779_BRZ2_UG_EN_FpBp_v0.indd 4-5
8/8/11 12:45:21 PM
8/8/11 12:45:21 PM

6
Bayer Customer Service: (852) 8100 6386
EVERYDAY USE
7
www.bayerdiabetes.com
INSERTING A10-TEST DISC: WARNING: Never open the meter with the meter handle pulled out. Open Meter 1.Turn the meter over so the display screen is facing down. Open the meter by pressing in on the back edge of the
open latch and then pulling
up on the base. Open Test Disc Package 2.Open a new 10-test disc package. Check the expiration date on the disc.
TESTING MATERIALS ޵щଥ
®(Bai An Jie®)
10-Test Disc (Disc contains ten test strips) (Not included with the kit) ޵щଥ
®(Bai An Jie®)
Control Solution (Not included with the kit) MICROLET®2Lancing Device
and MICROLET®Lancets
(Included with the kit)
WARNING: The MICROLET2 lancing device is intended
for self testing by a single patient. It must not be used on more than one person due to the risk of infection. Use a new MICROLET lancet each time you test because
it is no longer sterile after use.
idiii dd
82076779_BRZ2_UG_EN_FpBp_v0.indd 6-7
82076779_BRZ2_UG_EN_FpBp_v0.indd 6-7
8/8/11 12:45:22 PM
8/8/11 12:45:22 PM

Bayer Customer Service: (852) 8100 6386
8 9
www.bayerdiabetes.com
Helpful Hint: The meter must be kept flat when
closing. If the meter is not kept flat, the disc may move and become damaged and you may waste test strips.
Your meter will also tell you when you need to insert a new 10-test disc. It will do this by showing a picture of a disc being inserted into the meter.
Insert Disc 3.Insert a new 10-test disc (with
the bumpy side up), aligning the 5 notches in the disc with the tabs on the meter.
Close Meter 4.Close the meter and snap it shut. Keep the meter flat when closing it.
Counting the Number of Strips Left Your
޵щଥ
(Bai An Jie )
meter will automatically count down the number of test strips you have left. The number is shown with your test result. To see the count when the meter is off, press the button.
NOTE: This count is reset to 10
every time you open the meter. To keep an accurate count, open the meter only when all 10 of the test strips have been used in the 10-test disc.
82076779_BRZ2_UG_EN_FpBp_v0.indd 8-9
82076779_BRZ2_UG_EN_FpBp_v0.indd 8-9
8/8/11 12:45:23 PM
8/8/11 12:45:23 PM

Bayer Customer Service: (852) 8100 6386
10 11
www.bayerdiabetes.com
RUNNING ABLOOD GLUCOSE TEST: 1.Wash your hands well with soap and warm water. Rinse and dry thoroughly. NOTE: For testing sites other
than fingertips, see page 20.
Prepare Lancing Device Refer to the MICROLET2insert for complete instructions. 2.Remove the endcap from the
MICROLET2lancing device
with your thumb on the grip indent as shown.
3.Loosen the round protective
cap on a lancet by rotating it ¼ turn but do not remove it. Always use MICROLET lancets
for best operation.
Insert the lancet firmly into
the lancing device until it comes to a full stop. This will cock the device. You can also pull and release the cocking handle.
Twist off the lancet cap. Be
sure to save it for disposing of the used lancet.
4.Replace the gray endcap
prior to getting your blood drop.
Push Out Test Strip 5.Your
޵щଥ
(Bai An Jie )
meter uses a special, easy-to-use “Pull and Push” design.
Here’s how it works: Hold the meter comfortably in one hand. Firmly grasp the meter handle with the other hand (shown here). Now, just “Pull and Push”—“Pull” the handle out until it stops and “Push” it back in until it stops again.
Helpful Hint: There is no
need to turn the meter on— just “Pull and Push.”
82076779_BRZ2_UG_EN_FpBp_v0.indd 10-11
82076779_BRZ2_UG_EN_FpBp_v0.indd 10-11
8/8/11 12:45:24 PM
8/8/11 12:45:24 PM

Deep
Puncture
Shallow
Puncture
Use the Gray endcap!
Get the Blood Drop — Fingertip Testing The puncture depth depends on the endcap setting and the amount of pressure applied to the puncture site. You will quickly determine which combi- nation works best for you. 6. Press the endcap firmly
against the puncture site and press the blue release button with your thumb.
Bayer Customer Service: (852) 8100 6386
12 13
www.bayerdiabetes.com
CAUTION: • Your meter is designed to push out one test strip at
a time. Do not attempt to push out a new test strip with one already showing.
• Discard any test strip that has been removed from
the meter. Never re-insert a test strip into the meter.
NOTE: After the meter handle
is pushed in, the release button is UP, a test strip is pushed out, and a series of “apply blood” prompts appears. The meter is now ready to run a blood glucose test.
9. Your test strip is like a
straw—it sips in a sample of blood. Move the entire front edge of the test strip until it touches the edge of the blood drop. The blood is automatically pulled into the test strip and fills the test strip.
Test Hold the test strip in place
until the meter beeps, then move the meter away.
7. Stroke your hand and finger
towards the puncture site to form a drop of blood. Do not squeeze around the puncture site.
8. Test immediately after a good
blood drop has formed.
82076779_BRZ2_UG_EN_FpBp_v0.indd 12-13
82076779_BRZ2_UG_EN_FpBp_v0.indd 12-13
8/8/11 12:45:28 PM
8/8/11 12:45:28 PM

Bayer Customer Service: (852) 8100 6386
14 15
www.bayerdiabetes.com
For best results: • Blood is pulled IN the test
strip, not dropped ON.
• Do not allow blood to
run down into the meter.
• Do not add more blood
to the test strip after the meter beeps.
11. To release the used test
strip, hold the meter with the test strip pointing down over a waste container. Press the release button. Be sure the heel of your hand is not against the meter handle.
NOTE: If you block the meter
handle with your hand, the test strip may not release properly. 12. Press the button to turn the meter off.
NOTE: If you forget to turn your meter off, it will turn off automatically after three minutes. This will save battery power.
Your test result then appears on the screen.
Helpful Hint: The number
displayed in the upper left cor- ner is the number of test strips remaining in your 10-test disc.
IMPORTANT: If you want to mark this result as a deleted blood test, you must do that now, while the result is still be- ing displayed. See “Marking a Deleted Blood Test” on page 18.
10. After the beep, the display
counts down from “5” to “1.”
82076779_BRZ2_UG_EN_FpBp_v0.indd 14-15
82076779_BRZ2_UG_EN_FpBp_v0.indd 14-15
8/8/11 12:45:30 PM
8/8/11 12:45:30 PM

Bayer Customer Service: (852) 8100 6386
16 17
www.bayerdiabetes.com
PRECAUTIONS: • Test your blood again if your glucose result is below 2.8 mmol/L, above 13.9 mmol/L or if the meter
shows “LO” or “HI.” If your glucose level is still below 2.8 mmol/L, above 13.9 mmol/L, or if the meter again shows “LO” or “HI,” it may indicate a potentially serious medical condition.
If this is the case: Consult your physician or healthcare professional immediately. • Do not change your medication based on blood
glucose results with your
޵щଥ
(Bai An Jie )
meter without the advice of a physician or health- care professional.
•Your meter has been preset and locked to display results in mmol/L (millimoles of glucose per liter).
Test results in mmol/L will always include a decimal point. In some countries, the meters are preset to display results in mg/dL (milligrams of glucose per deciliter). Test results in mg/dL will never include a decimal point.
Example: or If your test result is displayed in the wrong unit of
measure (mg/dL), contact your authorized Bayer representative or call Customer Service (see the bottom of the page).
Remove the used lancet 1.In one hand, hold the lanc-
ing device with your thumb on the grip indent; with your other hand, hold the gray endcap dial as shown, and gently snap off the endcap.
2.Place the round protective
lancet cap on a flat surface with the Bayer logo facing down.
With the used lancet still in
the lancing device, push the lancet needle completely into the middle of the exposed side of the cap.
3.While pressing the blue
release button a, pull the
blue cocking handle b, and
the lancet will drop into the container you have selected.
Dispose of the used lancet
carefully to prevent injury or contamination to others.
Do not reuse lancets. Use a
new MICROLET lancet each
time you test.
82076779_BRZ2_UG_EN_FpBp_v0.indd 16-17
82076779_BRZ2_UG_EN_FpBp_v0.indd 16-17
8/8/11 12:45:31 PM
8/8/11 12:45:31 PM

Bayer Customer Service: (852) 8100 6386
18 19
www.bayerdiabetes.com
Understanding Your Test Results Expected Blood Glucose Values Blood glucose values will vary from time to time depending on food intake, medication dosages, health, stress or exercise. Consult your physician or healthcare professional for the target glucose values appropriate for you. Standard medical practice goals for a typical non-pregnant individual with diabetes are:1 • Before a meal: 5.0 to 7.2 mmol/L • 2 hours after a meal: less than 10.0 mmol/L Symptoms of High or Low Blood Glucose You can better understand your test results by being aware of the symptoms of high or low blood glucose; this will also help you decide what to do if your results seem unusual. Some of the most common symptoms are:2 High blood glucose (hyperglycemia): frequent urination, excessive thirst, blurred vision, increased fatigue, extreme hunger, and irritability. Ketones (ketoacidosis) from untreated hyperglycemia: shortness of breath, nausea and vomiting, very dry mouth. Low blood glucose (hypoglycemia): shakiness, sweating, fast heartbeat, blurred vision, strange behavior, confusion, passing out, and seizure. If you are experiencing any of these symptoms, test your blood glucose. If your result is below 2.8 mmol/L or above
13.9 mmol/L, or is displayed as “LO” or “HI,” contact your doctor immediately.
1American Diabetes Association: Standards of Medical Care for Patients With
Diabetes Mellitus (Position Statement). Diabetes Care 29 (Suppl. 1): S10; 2006.
2For additional information and symptoms, refer to the website for the American
Diabetes Association: www.diabetes.org
Marking a Deleted Blood Test NOTE: Marking a test result as a deleted blood test
excludes it from all of the averages that are calculated by your meter. You must mark the result immediately after the test is performed — while the result is still displayed on the screen. To do this, follow these steps: 1. Open the button door (see page 3). 2. Press the button to mark
as deleted. 3. The symbol indicates a
deleted result. 4. Press to accept.
5. Press to turn your
meter off.
82076779_BRZ2_UG_EN_FpBp_v0.indd 18-19
82076779_BRZ2_UG_EN_FpBp_v0.indd 18-19
8/8/11 12:45:36 PM
8/8/11 12:45:36 PM

Suggested drop size
Use the CLEAR endcap!
IMPORTANT: Do not use Alternative Site Testing under the follow- ing conditions. Use fingertip testing in any of these cases: • If you think your blood glucose is low (hypoglycemia). • When blood glucose is changing rapidly (after a meal, insulin dose
or exercise).
• If you have hypoglycemic unawareness (lack of symptoms). • If you get alternative site blood glucose results that do not agree
with how you feel.
• During illness or times of stress. • If you will be driving a car or operating machinery. Consult your healthcare professional to determine if alternative site testing is right for you.
Attach the clear AST endcap to
the MICROLET2lancing device.
Select a puncture site from a fleshy area on the palm. Avoid veins, moles, bone and tendon.
i
t
i
s not nece
s
s
-
sary to rub the skin or pump the
sary
to
rub
the
skin
or
pump
the
de
vi
ce
. Pr
ess
t
h
e
c
l
ear
endca
p
fi
rmly against the puncture site
a
nd then press the blue release
butto
n
.
Maintain steady pressure until the blood drop reaches the sug- gested size (1.0 μL).
Lift the device away from the skin without smearing the blood. Do not test the blood sample if you get: • Smeared blood • Clotted blood • Runny blood • Clear fluid mixed with the
blood.
Bayer Customer Service: (852) 8100 6386
20 21
www.bayerdiabetes.com
Unusual Test Results If your blood glucose result doesn’t match the way you feel, follow these steps: 1. run a control test (see page 22); 2. retest your blood glucose (see page 10); 3. call your doctor immediately if your result still does
not agree with the way you feel.
Alternative Site Testing (AST) (If you want to do alternative site testing, please call Bayer Diabetes Care Service at (852) 8100 6386 to order the clear AST endcap.) Use AST only when it has been more than two hours after any one of the following: a meal, diabetes medication, or exercise. Palm testing is recommended as an alternative site when using the MICROLET2device. For forearm testing, or if using AUTODISC
test strip discs, use the MICROLET VACULANCE lancing device.
82076779_BRZ2_UG_EN_FpBp_v0.indd 20-21
82076779_BRZ2_UG_EN_FpBp_v0.indd 20-21
8/8/11 12:45:36 PM
8/8/11 12:45:36 PM

Bayer Customer Service: (852) 8100 6386
22 23
www.bayerdiabetes.com
RUNNING ACONTROL TEST: There are times when you will want to do a quality control test so you know that your system is working properly. You may also want to do a control test to check the way you do your test. Simply follow these steps: Push Out Test Strip 1. Hold the meter comfortably in
one hand. Firmly grasp the meter handle with the other hand (shown here). Now, just “Pull and Push”—“Pull” the handle out until it stops and “Push” it back in until it stops again.
NOTE:
After the meter handle is pushed in, the release
button is UP, a test strip is pushed out and a series of “apply blood” prompts appears. The meter is now ready to run a control test. 2. Squeeze a small drop of
޵щଥ
(Bai An Jie ) control
solution onto a nonabsorbent surface (such as a clean piece of wax paper). Do not apply control solution to the test strip directly from the bottle.
NOTE: The control solution contains a red dye and may stain.
Test 3. Move the entire front edge of
the test strip until it touches the edge of the drop of the control solution. The control solution is automatically pulled into the test strip.
IMPORTANT: Hold the test
strip in place until the meter beeps, then move the meter away.
4. After the beep, the display counts down from “5” to “1.”
Your control test result then appears on the screen.
82076779_BRZ2_UG_EN_FpBp_v0.indd 22-23
82076779_BRZ2_UG_EN_FpBp_v0.indd 22-23
8/8/11 12:45:39 PM
8/8/11 12:45:39 PM

LOW NORMAL HIGH
LOW NORMAL HIGH
2.6-4.8 5.8-8.3 13.9-18.1
2.6-4.8 5.8-8.3 13.9-18.1
1A2164AA
1A2164AA
2007-03
2007-03
LOT:
LOT:
EXP:
EXP:
mmol/L
mmol/L
CONTROL RANGES
CONTROL RANGES
Bayer Customer Service: (852) 8100 6386
24 25
www.bayerdiabetes.com
Compare this control test result with the control range printed on the bottom flap of the carton of
޵щଥ
(Bai An Jie ) test strips.
NOTE: You will want to “mark”
your Control test now so that it will not be included in your averages.
Marking a Control Test Marking a test result as a control test excludes it from being included in your test averages. You must mark the result immediately after the test is performed—while the result is still displayed on the screen. To do this, follow these steps: 5. Open the button door. Press the button to mark
as a control. The symbol indicates a
control result. Press to accept.
6. To release the used test strip,
hold the meter with the test strip pointing down over a waste container. Press the release button. Be sure the heel of your hand is not against the meter handle.
NOTE: If you block the meter
handle with your hand, the test strip may not release properly. 7. Press to turn your meter off.
82076779_BRZ2_UG_EN_FpBp_v0.indd 24-25
82076779_BRZ2_UG_EN_FpBp_v0.indd 24-25
8/8/11 12:45:41 PM
8/8/11 12:45:41 PM

BEYOND EVERYDAY USE
Bayer Customer Service: (852) 8100 6386
26 27
www.bayerdiabetes.com
RECALLING TEST RESULTS: Your
޵щଥ
(Bai An Jie ) meter can store up to 420
test results in its memory. This makes it easy to see your previous blood glucose test results. To view those results: 1. Open the button door. 2. Press the button.
The meter shows you the most recent test result. 3. Press the button to see
each of your stored results.
Helpful Hint: When only is shown on the display,
you are seeing the most recent result; when only is shown, you are seeing the oldest result.
Helpful Hint: Your meter can store up to 420 test
results. If there are no stored test results in memory, the meter will tell you this by showing three dashes. When the memory is full, the meter will save the newest result and discard the oldest.
Viewing Your Averages Your
޵щଥ
(Bai An Jie ) meter calculates several differ-
ent averages of your blood glucose results. You can view averages for 1 day (the previous 24 hours), 7 days, 14 days, and 30 days. To see the averages, simply follow these steps. 1. Open the button door and press the button. The
meter will show you your last result. 2. Press the button again
to see your blood glucose average for the last 14 days. 3. Press the and buttons
to see each of your averages (30 days, 1 day [24 hours], 7 days, and 14 days). The bottom line of the display will show you which average is being displayed.
NOTE: If there are no results
in the memory for the average you have selected, it will be displayed as 3 dashes. Otherwise, the averages will be based on the results available, even if there are fewer days than the specific average. 4. Press the button again to review your individual
stored test results.
82076779_BRZ2_UG_EN_FpBp_v0.indd 26-27
82076779_BRZ2_UG_EN_FpBp_v0.indd 26-27
8/8/11 12:45:42 PM
8/8/11 12:45:42 PM

Bayer Customer Service: (852) 8100 6386
28 29
www.bayerdiabetes.com
Clearing Stored Test Results To clear the stored results from your meter, follow these simple steps: 1. Open the button door. 2. Press the button.
3. Press the button again and hold it. 4. While holding the button,
press and hold the button.
5. Hold both buttons together until all three dashes are continuously lit (for about 3 seconds). If you change your mind and do not want to clear results, simply let go of the buttons before all three dashes have been lit.
SETUP FUNCTION:
Helpful Hint: You can press the button at any time
during Setup to turn the meter off. Just remember to press the button first to store your changes!
Setting the Time 1. Open the button door (see page 3). 2. Press .
3. Press or as needed to
change the hour. When the correct hour is being displayed, press to
accept it and move on. 4. Press or to change
the minutes. Press to accept and
move on.
Helpful Hint: You may
want to change the time when you travel to a different time zone or when the time changes with daylight savings time.
82076779_BRZ2_UG_EN_FpBp_v0.indd 28-29
82076779_BRZ2_UG_EN_FpBp_v0.indd 28-29
8/8/11 12:45:43 PM
8/8/11 12:45:43 PM

Bayer Customer Service: (852) 8100 6386
30 31
www.bayerdiabetes.com
5. Press or to select AM
or PM. Press to accept and
move on.
Setting the Date NOTE: If you have just set the time, skip ahead to step 4.
1. Open the button door. 2. Press .
3. Press until you see the “day” display flashing. 4. Press or to change
the day. Press to accept and
move on.
5. Press
or
to change
the month
.
Press to accept and
move on. 6. Press or to change
the year. Press to accept and
move on.
82076779_BRZ2_UG_EN_FpBp_v0.indd 30-31
82076779_BRZ2_UG_EN_FpBp_v0.indd 30-31
8/8/11 12:45:43 PM
8/8/11 12:45:43 PM

Bayer Customer Service: (852) 8100 6386
32 33
www.bayerdiabetes.com
Setting the Buzzer Level Your
޵щଥ
(Bai An Jie ) meter has an easy-to-use volume
control for the buzzer. There are three different buzzer levels:
high low off
NOTE: If you have just set the date, skip ahead to step 4.
1. Open the button door. 2. Press .
3. Press until you see the “buzzer” symbol. 4. Press or to change
the buzzer level. Press to accept and
move on.
Setting the Time Format (12- or 24-hour Clock) Your meter can display the time format as either 12-hour () or 24-hour ( ). You can change the time format
as follows:
NOTE: If you have just set the buzzer level, skip ahead to
step 4. 1. Open the button door. 2. Press .
3. Press until you see the “time format” display. 4. Press or to change the
time format.
Press to accept and
move on.
82076779_BRZ2_UG_EN_FpBp_v0.indd 32-33
82076779_BRZ2_UG_EN_FpBp_v0.indd 32-33
8/8/11 12:45:44 PM
8/8/11 12:45:44 PM

Bayer Customer Service: (852) 8100 6386
34 35
www.bayerdiabetes.com
CAUTION: The
޵щଥ
(Bai An Jie ) meter has not
been tested or certified by Bayer for use with any software other than Bayer’s diabetes management software. Bayer is not responsible for any erroneous results from the use of other software.
Setting the Date Format Your meter can display the date format as either “month-day” ( ) or as “day-month” ( ).You can
change the date format as follows:
NOTE: If you have just set the time format, skip ahead to
step 4. 1. Open the button door. 2. Press .
3. Press until you see the “date format” display. 4. Press or to change the
date format.
Press to accept.
TRANSFERRING RESULTS TO ACOMPUTER: You can transfer test results from the
޵щଥ
(Bai An Jie ) meter to a
computer, where they can be summarized in a report with graphs and tables. To make use of this feature, you need Bayer’s diabetes management software and data cable. For more information, call Customer Service or visit our website (see the bottom of the page).
82076779_BRZ2_UG_EN_FpBp_v0.indd 34-35
82076779_BRZ2_UG_EN_FpBp_v0.indd 34-35
8/8/11 12:45:45 PM
8/8/11 12:45:45 PM