BCDVideo BCD-RGD-402P-UMT User manual

BCD-RGD-402P-uMT Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
1
index
1 INTRODUCTION 2
1.1 BCD-RGD-402P-UMT INTRODUCTION 2
1.2 FEATURES 2
1.3 SPECIFICATIONS 3
2 PANEL VIEWS 4
2.1 Front panel view 4
3 DIMENSIONS (UNIT=mm) 5
4 MOUNTING 6
4.1 DIN mounting 6
4.2 Wall mounting 6
4.3 Items for attention 7
4.4 Grounding 7
5 CABLE 8
5.1 Ethernet cable 8
5.2 SFP port 9

BCD-RGD-402P-uMT Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
2www.bcdvideo.com
1.1 Introduction
The BCD-RGD-402P-UMT is an unmanaged PoE/PoE+ Industrial Ethernet switch with 4*10/100/1000 auto
sensing electrical ports and 2 *1000M SFP uplink ports. This Product supports PoE/PoE+, each port outputs
up to 30W. Industrial level 3 protection design and IP40 enclosure protection makes the product suitable for
applications with harsh environments.
1.2 features
− Unmanaged industrial switch
− 4 10/100/1000Base-T ports
− 2 1000Base-X SFP ports
− Supporting IEEE802.3af&at
− Dual 45~57VDC power input
− Level 3 ESD protection
− IP-40 housing design
− Operation temperature: -40~+75℃
− Support DIN-rail or wall mounted
− Special DIN mount design for easy mounting and removal
− Installation: Plug-and-play, no setting required

BCD-RGD-402P-uMT
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
3
1.3 specifications
Ethernet
10/100/1000 Base-T 4
1000Base-FX SFP 2 (SFP slot)
PoE standard IEEE802.3af/at
Switching Performance
Architecture Store and Forword
Switching Capacity 12Gbps
Power
Redundant Input Power Dual DC inputs. 45~57VDC, 5-pin screw terminal
Power Consumption (Max.) 5W (No PoE)
PSE type End Span
PoE Port Each port up to 30W
Overload Current Protection Present
Reverse Polarity Protection Present
Mechanical
Enclosure IP40
Dimension (w x d x h) 62mm (w) x 86.5mm (d) x 100mm (h)
Weight 0.5Kg
Environment
Storage Temperature -40 to +85oC (-40 to 185oF)
Operating Temperature -40 to +75oC (-40 to 167oF)
Operating Humidity 5% to 95% Non-condensing

BCD-RGD-402P-uMT Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
4www.bcdvideo.com
2. Panel views
2.1 front panel view
1. PWR status indication
2. 45~57VDC power input
3. PoE status indication
4. Ground screw
5. 10/100/1000Base-T port: #1 ~ #4
6. 1000Base-X SFP port: # 5 ~ #6

BCD-RGD-402P-uMT
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
5
3. dimensions (unit=mm)
WARNING: This product MUST be mounted to a well-grounded mounting surface such as a metal panel.
Status indicator LED
LED Color Status Description
P1 Orange On Power is being supplied
O Power is not being supplied
P2 Orange On Power is being supplied
O Power is not being supplied
PoE1-4 Green On The corresponding port’s PoE on
O The corresponding port’s PoE power o
10/100/1000Base-T(X)
SPD Green On Speed indicator for 1000Mbps
O Speed indicator for 100Mbps and 10 Mbps
LINK/ACT Orange On The corresponding port’s link is active
Blinking Data is being transmitted
O The corresponding port’s link is inactive
!

BCD-RGD-402P-uMT Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
6www.bcdvideo.com
4. mounting
4.2 Wall mounting
Very simple: Press the clamp, insert into rail then loosen hand.
Step 1 Step 2

BCD-RGD-402P-uMT
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
7
4.3 items for attention
− Operating Ambient: If the product is installed in a closed rack, the inside operating ambient temperature of
the rack may be higher than outside. Therefore, consideration should be given to installing the equipment in
an environment compatible with the maximum operating temperature specified by the manufacturer.
− Air Flow: Installation of the equipment in a rack should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
− Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit
and the eect that overloading of the circuits might have on overcurrent protection and supply wiring.
− Reliable Earthing: Reliable earthing of rack-mounted equipment should be maintained. Particular attention
should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).”
4.4 Grounding
Grounding and wire routing help limit the eects of noise due to electromagnetic interference (EMI). Run the ground
connection from ground screw to the grounding surface prior to connecting devices.
Step 1 Step 2
Step 1: Remove the guide rail fastener.
Step 2: Remove the DIN clamp in the rear panel.
Step 3: Find the wall mounting accessory,
and loosen these 4 screws in the Swtich.
Step 4: Mounting the accessory on the rear panel.
Step 5: Fixed the switch on the wall.

BCD-RGD-402P-uMT Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
8www.bcdvideo.com
5. cable
5.1 ethernet cable
The product uses standard Ethernet cable. Depending on the connection type, you can choose CAT3, 4, 5e, 6 UTP
cable to connect to other network devices (computers, servers, switches, routers, hubs, etc.). Make sure that the
cable properties in the following form.
100BASE-TX/10BASE-T Pin Allocation
100BASE-TX/10BASE-T Cable, pins 1 and 2 to send data, receive data pin 3,6
10/100 Base-T RJ-45 Pin Definition
1000 Base-T RJ-45 Pin Definition
Cable Type Max Length Connector
10BASE-T Cat. 3, 4, 5, 100-ohm UTP 100m (328 ) RJ-45
100BASE-TX Cat.5 100-ohm UTP UTP 100m (328 ) RJ-45
1000BASE-TX Cat. 5/Cat. 5e/6 100-ohm UTP UTP 100m (328 ) RJ-45
Pin Number Signal PoE
1 TD+ PoE+
2 TD- PoE+
3 RD+ PoE-
4 null
5 null
6 RD- PoE-
7 null
8 null
Pin Number Signal PoE
1 BI_DA+ PoE+
2 BI_DA- PoE+
3 BI_DB+ PoE-
4 BI_DC+
5 BI_DC-
6 BI_DB- PoE-
7 BI_DD+
8 BI_DD-

BCD-RGD-402P-uMT
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
Industrial Gigabit Ethernet Switch with PoE+
6 ports: 4 PoE+ ports, 2 optical uplink ports
9
This switch supports MDI / MDIX auto-flip function. The following table lists the 10/100 BAse-T MDI/MDI-X/1000
Base-T MDI/MDI-X port pin output.
10/100 Base-T MDI/MDI-X Pin Definition
1000 Base-T MDI/MDI-X Pin Definition
5.2 SFP port
SFP port supports both electrical and optical SFP modules. Selecting right SFP modules (rate, MM/SM,
1 fiber/2 fibers) based on application. Please note that 1000M SFP port supports 1000Mbps only.
Pin Number MDI Port Signal PoE
1 TD+(transmit) RD+(receive) PoE+
2 TD-(transmit) RD-(receive) PoE+
3 RD+(receive) TD+(transmit) PoE-
4 Not used Not used
5 Not used Not used
6 RD-(receive) TD-(transmit) PoE-
7 Not used Not used
8 Not used Not used
Pin Number MDI Port Signal PoE
1 BI_DA+ BI_DB+ PoE+
2 BI_DA- BI_DB- PoE+
3 BI_DB+ BI_DA+ PoE-
4 BI_DC+ BI_DD+
5 BI_DC- BI_DD-
6 BI_DB BI_DA- PoE-
7 BI_DD+ BI_DC+
8 BI_DD- BI_DC-