BCS VH-9680 User manual

Step 1: Unfold the solar panel on the jib, the back-jib or on
top of the basket.

Step 2: Take out the brackets, strip and U-bolts.

Step 3: Put the strip on the side of the solar panels,
covering both panels over 50%.

Step 4: Put the brackets on the edges of the panels, and
extend them so they fit (marked red).
The distance between the brackets is depending on the size
of the basket.

Step 5: Remove the bold and nut (marked red) and fold the
bracket in a vertical position. Do this on both brackets.

Step 6: Put the bold and nut back in the marked hole and
screw tight. Do this on both brackets.

Step 7: Put the diagonal bracket in between the 2 rings,
and screw the nut tight.

Step 8: Place the solar panel on the outside of the basket.
Let it rest on the 2 U formed strips. Remember to always
keep a hand on the panel to support it!
Now lift it up a little bit and put in the U-bolts and screw them
tight.
The solar panel is now fixed on the basked and ready to use.