BEA 10PS12 User manual

75.0148 V1 July 2000
These power supplies are UL-Listed control units for use with electromagnetic locking devices and systems. They may be
ordered with optional battery backup systems to power devices in the case of power loss.
GENERALDESCRIPTION:
12 VOLT 24 VOLT
POWER SUPPLY 10PS12 10PS24
POWER SUPPLY WITH
BATTERY BACKUP 10PS12PB 10PS24PB
DESCRIPTION 12 VDC RATED POWER SUPPLY 24 VDC RATED POWER SUPPLY
ENCLOSURE
DIMENSIONS 12” W x 14” L x 4”D 12” W x 14” L x 4”D
INPUT POWER 120 VAC 120 VAC
OUTPUT POWER 12 VDC 24 VDC
RATING 2 Amps 2 Amps
MAXIMUM # OF
MAGLOCKS UP TO 3 MAGLOCKS UP TO 6 MAGLOCKS
OUTPUTS Fire alarm release
Auto/ Manual reset after fire alarm release
Auxiliary power for keypads/ external controls
Fire alarm release
Auto/ Manual reset after fire alarm release
Auxiliary power for keypads/ external controls
POWERSUPPLYBOARDDESCRIPTION:
TERMINAL DESCRIPTION
1 N/C
2 N/O
3 COMMON
Auxiliary form ‘C’ dry contact. Fire alarm supervised.
4 & 5
Field selection for automatic or manual system reset. For system to automatically reset
when the fire alarm contact is reset, put jumper wire across these terminals. If manual
reset is required, a normally open (momentary switch) is used across these terminals.
Momentary activation of switch will reset the system.
6 & 7 To be tied to (normally closed) fire alarm contacts. The fire alarm contacts will open and release all magnetic locks immediately. If fire alarm system supervision is not required,
a jumper across the terminals is required to derive 24 VDC from output terminals.
8 & 9 Auxiliary 12 VDC output (0.1 Amp max, not fused) for other system components,
requiring 12 VDC power.
TB1
10 & 11 (For 10PS24/PB only) Auxiliary 24 VDC output (0.25 Amp max, not fused) for other
system components, requiring 24 VDC power.
TB2
1 & 2 Optional battery backup unit terminals. Jump these two wires if battery backup is not
supplied.
If after troubleshooting a problem, a satisfactory solution cannot be achieved, please call B.E.A., Inc.
for further assistance during Eastern Standard Time at
1-800-523-2462 from 7am - 5pm or 1-800-407-4545 from 5pm - midnight & weekends.
DO NOT leave any problem unresolved. If you must wait for the following workday to call B.E.A., leave the door inoperable until
satisfactory repairs can be made. NEVER sacrifice the safe operation of the automatic door or gate for an incomplete solution.
12and24VDCPOWERSUPPLY
INSTRUCTIONMANUAL