Beckett AFG Oil Burner 240V Dimensions

RESIDENTIAL BURNERS
AFGOil Burner 240V
240V
Advanced Components
• 240V GeniSys Burner Control
• CleanCut Pump
• 240V PowerLight Beckett Igniter
• PSC Motor
• Beckett Sound Cover (optional)
Description
The 240 voltAFG burner has technically advanced components to meet increased demand for improved burner
performance for residential, pressure washers and light commercial applications. These advanced components are
available on our B2000 series chassis. The 240 volt AFG’s performance-enhancing features will help you meet
today’s toughest heating system and pressure washer challenges.
ProductSheet
Outputs:
◦Motor: 208/240 Vac, 5 full load amps (FLA), 30 locked rotor amps (LRA)
◦Igniter: 208-240 Vac, 3A@ 0.7 PF min
◦Solenoid Valve: 208-240 Vac, 1A@ 0.7 PF min
◦ThermostatAnticipator Current: 0.1A (if applicable)
◦Thermostat Voltage: 24 Vac (if applicable)
Electrical Ratings
Inputs:
◦Voltage: 220-240 Vac (177 to 264 Vac)
◦Current: 100 mAnominal (150 mAmax at 264 Vac)
◦Frequency: 50/60 Hz
Beckett GeniSys
Control Part No. Lockout Time Valve-on delay time1Motor-off delay time1Replaces Honeywell:
7560A 0000 15 sec - - R8184G
7560B 1500 15 sec 15 sec - -
7560P 1515 15 sec 15 sec 15 sec -
7560P 1530 15 sec 15 sec 30 sec -
7560P 152M 15 sec 15 sec 2 min -
1 - Valve-on delay and motor-off delay timings on all models are programmable with Beckett snap-on
programming display. Other factory set timings are available. Contact Beckett for alternate timings.
GeniSys Controls:
Models and Settings
Flame Retention Heads
The maximum firing rates shown
are for 60HZ operation. For 50HZ
operation the maximum firing rate for
each head is reduced by about 20%.

Form No. 61283, Printed in the USA 02/11
www.beckettcorp.com
USA: R.W. Beckett Corporation • ph: [phone] • fax: [phone] | Canada: R.W. Beckett Canada Ltd. • ph: [phone] • fax: [phone]
RESIDENTIAL BURNERS
AFGOil Burner 240V
240V
Chassis Plan
▫Reduces Investment Up To 65%
▫Reduces Storage Up To 85%
▫Speeds Service Calls
The Beckett Chassis Plan lets you stock a minimum number
of oil burners and still get maximum installation flexibility. The
chassis represents 90% of the total burner cost, but one chassis
adapts to all firing rates commonly encountered in upgrading and
replacement jobs.
How to Order
Order Burner Chassis
1. ModelAFG Burner Chassis
2. Type of Fuel Unit (single or two-stage)
3. Primary Control
OrderAccessories
1. Specify type of supports required
2.Add any other items such as spare parts, related
controls, valves, etc.
Other AFG Components
ProductSheet
Features
◦Welded Relay Protection
◦Limited Recycle
◦Limited Reset
◦3 Status Lights
◦15 Second Lockout Time
◦Disable Function
◦Communication Ports (2)
◦Technician Pump Priming Mode
◦Interrupted or Intermittent Duty Ignition
◦Valve-On Delay / Motor-Off Delay
(Field programmable with Beckett add-on Display)
◦Thermostat / Operating (if applicable) and Limit Control
Compatible
CleanCut Pump
• Integrated solenoid (50/60 Hz) valve.
• Higher capacity design delivers up to 3
GPH at 100psi on theAFG burner.
• The CleanCut has fewer moving parts
and reduces motor load.
240V PowerLight Beckett Igniter
• Electrodes last approx. 50% longer.
• Higher output voltage for reliable ignition.
• Approximately 75% lower input amps.
PSC Motor - 50/60 Hz
• Lower amp draw & cooler operation.
• Delivers more power with the PSC
design (permanent split capacitor).
• Proven durability after 10 years of high
reliability in the field.
• Ball bearings for longer life.
Beckett Sound Cover (optional)
• Reduces near-burner air and
component noise.
• Enhances burner appearance.
• Easy to use knockout and adapter kit
when ducted air is required.
The Beckett GeniSysTM Advanced Burner Control is a 208/240
Vac, 50/60 Hz primary safety control for residential and light
commercial oil burners used in boiler, furnace, and water
heater applications having firing rates less than 20 GPH.
The GeniSys is used with a suitable cad cell flame sensor
to control the oil burner motor, igniter, and optional solenoid
valve. It has 24 Vac thermostat terminals (if applicable)
compatible with both mechanical and many power stealing
thermostats. It can also provide interrupted or intermittent
duty ignition.
Description / Applications
Beckett GeniSys Control 240V
de