Beef Eater 1100 series User manual

1100
Built In
Trim Kit - Assembly Instructions
FOR OUTDOOR USE ONLY
To suit models:
1100s
1100e
1100
3, 4 or 5 Burners

2
Content:
Instructions
Note: the full Barbecue assembly instructions can be found in the Barbecue Carton. These
instructions only refer to placement of Trims in Built-In situations.
1. Attach the RH Bracket and LH Bracket to Barbecue body using 8 off M6 x 12mm screws as
follows:
2. Place BBQ into its position in the bench, resting on the brackets installed in (1).
3. Attach the rear trim to place:
4. The front cover can be removed for accessing the Fat-Collecting Pan and replaced:
Qty description Qty description
1 Front Cover 10 M6 x 12mm Screws
1+1 RH Bracket + LH Bracket 10 M6 Fiber Washers
1 Back Cover
1100_TrimKit_Inst _V0
Images in this manual are for illustrative purposes only.
Due to constant improvement, BeefEater advises that
changes to the design, material, specifications and product
confi
g
uration ma
y
occur at an
y
time without notice.
Woodland Home Products
3-5 Birmingham Av, Chester- Hill, NSW,
Australia, 2162
Phone: [phone]
Facsimile: 02 9724 8899
E-mail: [e-mail]
Website: www.beefeaterbbq.com
USA TollFree: 1866 550 2333
NOTE:
Washersaretobeplaced
betweentheBarbecuebody
andthebracket.