4
EURORACK UB1002
SPECIFICATIONS
Mono inputs
Microphone inputs (IMP Invisible Mic Preamp)
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz 20 kHz)
@ 0 Ω source resistance 134 dB / 135.7 dB A weighted
@ 50 Ω source resistance 131 dB / 133.3 dB A weighted
@ 150 Ω source resistance 129 dB / 130.5 dB A weighted
Frequency response <10 Hz 150 kHz ( 1 dB),
<10 Hz 200 kHz ( 3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal to noise ratio 110 dB / 112 dB A weighted
(0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A weighted
Line input
Type 1/4" TRS connector
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range 10 to +40 dB
Max. input level +22 dBu @ 0 dB Gain
Fa e-out attenuation1
(Crosstalk attenuation)
Main fader closed 90 dB
Channel muted 89.5 dB
Channel fader closed 89 dB
Frequency response
Microphone input to main out
<10 Hz 90 kHz +0 dB / 1 dB
<10 Hz 160 kHz +0 dB / 3 dB
Stereo inputs
Type 1/4" TRS connector,
electronically balanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
EQ mono channels
L o w 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
Aux sen
Type 1/4" TS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Main outputs
Type 1/4" TRS connector, unbalanced
Impedance approx. 120 Ω unbal.
Max. output level +22 dBu
Control room outputs
Type 1/4" TS connector, unbal.
Impedance approx. 120 Ω
Max. output level +22 dBu
Hea phones output
Type 1/4" TRS connector, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
Main mix system ata2
Noise
Main mix @ oo,
Channel fader oo 106 dB / 109 dB A weighted
Main mix @ 0 dB,
Channel fader oo 95 dB / 98 dB A weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB 84 dB / 87 dB A weighted
Power supply
Power consumption 18 W
Mains voltage
USA/Canada 120 V~, 60 Hz, MXUL5 adapter
U.K./Australia 240 V~, 50 Hz, MXUK5 adapter
Europe 230 V~, 50 Hz, MXEU5 adapter
Japan 100 V~, 60 Hz, MXJP5 adapter
Dimensions
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
7 2/5" (189 mm) x 8 2/3" (220 mm)
Weight (net) approx. 1.05 kg (2.31 lbs)
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; E flat; all
channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far
right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.
