Behringer ULTRA CHORUS UC200 User manual

ULTRA CHORUS UC200
Ultimate Stereo Chorus Eects Pedal
V 4.0
Thank you for showing your condence in us by purchasing the Behringer ULTRA CHORUS UC200.
This ultimate eects pedal is designed to deliver super-thick chorus with unbelievable stereo eect.
Thanks to its high-performance features you’ll have full parameter control for absolute exibility
and limitless creative options.
The chorus eect slightly detunes the original signal. A very pleasant detune eect is created
in connection with the pitch variation. The chorus eect is used often and quite extensively used
for dispersing signals.
1. Controls
(1) The LEVEL control adjusts the output level
(2) The TONE control allows you to adjust the overall eects sound and achieve a more dened
and brilliant tone.
(3) The RATE control determines the chorus eect speed.
(4) Turn up the DEPTH control to achieve a fuller, deeper eect sound.
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS IN connector to plug in the instrument cable.
(8) The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors
if you want to achieve full stereo chorus eect. For mono use just plug in OUT A.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
(5)
(1)
(6)
(7)
(3)
(2)
(4)
(8)

ULTRA CHORUS UC200
Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement
contained herein.Technical specications, appearances and other information are subject to change without notice. All trademarks are the property of their respective
owners. Midas, KlarkTeknik, Lab Gruppen, Lake,Tannoy,Turbosound,TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks
or registered trademarks of Music Tribe Global Brands Ltd. © MusicTribe Global Brands Ltd. 2021 All rights reserved.
◊◊ The UC200 has no on/o switch. As soon as you insert the jack into the in connector,
the UC200 begins running. When not using the UC200, remove the jack from the in
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s
Limited Warranty, please see complete details online at musictribe.com/warranty.
4. Specications
In
Connector ¼" TS
Impedance 500 kΩ
Out A
Connector ¼" TS
Impedance 1 kΩ
Out B
Connector ¼" TS
Impedance 1 k
Power Supply
9 V , 100 mA regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest
professional standards. As a result of these efforts, modifications
may be made from time to time to existing products without
prior notice. Specifications and appearance may therefore differ
from those listed or shown.

FEDERAL COMMUNICATIONS COMMISSION
COMPLIANCE INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas NV 89118,
United States
Phone Number: [phone]
ULTRA CHORUS UC200
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and receiver.
•• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Important information:
Changes or modications to the equipment not expressly approved by Music Tribe can void
the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU,
Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012
REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark
ULTRA CHORUS UC200