7 / 21 EN
Air conditioner remote control / User Manual 7 / 44 EN
Not sure what a function does?
Refer to the How to use the basic functions and How to use the advanced functions sections
of this manual for a detailed description of how to use your air conditioner.
C
Special note
•Button designs on your unit may differ slightly from the example shown.
•If the indoor unit does not have a particular function, pressing that function s button
on the remote control will have no effect.
•When there are wide differences between "Remote controller Illustration" and
"USER'S MANUAL" on function description, the description of USER'S MANUAL shall
prevail.
3.1 Insertng and replacng batteres
Your air conditioning unit comes with two AAA batteries. Put the batteries in the remote control
before use.
1. Slide the back cover from the remote control downward, exposing the battery compartment.
2. Insert the batteries, paying attention to match up the (+) and (-) ends of the batteries with the
symbols inside the battery compartment.
3. Slide the battery cover back into place.
C
Battery notes
For optimum product performance:
•Do not mix old and new batteries, or batteries of different types.
•Do not leave batteries in the remote control if you don't plan on using the device for
more than 2 months.
C
Battery disposal
Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper
disposal of batteries.
Tips for using remote control
•The remote control must be used within 8 meters of the unit.
•The unit will beep when remote signal is received.
•Curtains, other materials and direct sunlight can interfere with the infrared signal receiver.
•Remove batteries if the remote will not be used more than 2 months.
3 Handlng the remote control
