
13 / EN Washing Machine / User’s Manual
4.11 Starting the programme
1.PressStart/Pausebuttontostarttheprogramme.
2.Programmefollow-uplightshowingthestartupofthe
programme will turn on.
CIfnoprogrammeisstartedornobuttonispressedwithin
1 minute during programme selection process,the
machinewillswitchtoPausemodeandtheillumination
level of the temperature,speed and loading door indicator
lightswilldim.Otherindicatorlightsandindicatorswill
turnoff.OncetheProgrammeSelectionknobisrotatedor
anybuttonispressed,indicatorlightsandindicatorswill
turn on again.
4.12 Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
with the machine.Thus you can avoid any changes in a
running programme.
CIftheProgrammeSelectionknobisturnedwhentheChild
Lockisactive,"Con"appearsonthedisplay.TheChild
Lock does not allow any change in the programmes and
theselectedtemperature,speedandauxiliaryfunctions.
Even if another programme is selected with the
ProgrammeSelectionknobwhiletheChildLockisactive,
previously selected programme will continue running.
To activate the Child Lock:
1.and2.AuxiliaryFunctionbuttonsarepressedandheldfor
3 seconds.The lights on the 1st and 2ndAuxiliaryFunction
buttonswillflash,and"C03","C02","C01"willappearon
thedisplayrespectivelywhileyoukeepthebuttonspressed
for3seconds.Then,"Con"willappearonthedisplay
indicatingthattheChildLockisactivated.Ifyoupressany
buttonorturntheProgrammeSelectionknobwhentheChild
Lock is active,same phrase will appear on the display.The
lightsonthe1stand2ndauxiliaryfunctionbuttonsthatare
usedtodeactivatetheChildLockwillblink3times.
To deactivate the Child Lock:
Pressandhold1st and 2ndauxiliaryfunctionbuttonsfor3
seconds while any programme is running.The lights on the
1st and 2ndAuxiliaryFunctionbuttonswillflash,and"C03",
"C02","C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.Then,"COFF"
willappearonthedisplayindicatingthattheChildLockis
deactivated.
C
Inadditiontothemethodabove,todeactivatetheChild
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
ChildLockisnotdeactivatedafterpowerfailuresor
when the machine is unplugged.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programme step,the relevant indicator light will turn on and
light of the completed step will turn off.
Youcanchangetheauxiliaryfunctions,speedand
temperature settings without stopping the programme flow
while the programme is running.To do this, the change
youaregoingtomakemustbeinastepaftertherunning
programmestep.Ifthechangeisnotcompatible,relevant
lights will flash for 3 times.
CIfthemachinedoesnotpasstothespinningstep,Rinse
Holdfunctionmightbeactiveortheautomaticunbalanced
loaddetectionsystemmightbeactivatedduetothe
unbalanceddistributionofthelaundryinthemachine.
4.14 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
thewaterlevelisunsuitable.
Loading door light will start flashing when the machine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminates steadily within 1-2 minutes and the loading door
canbeopened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
4.15 Changing the selections after programme
has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pause mode while a programme is running.The light of
the step which the machine is in starts flashing in the
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Doorlightwillalsoilluminatecontinuouslyinadditiontothe
programme step light.
Changing the auxiliary function, speed and temperature
Dependingonthesteptheprogrammehasreached,you
cancanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
CIfnochangeisallowed,therelevantlightwillflashfor3
times.
Adding or taking out laundry
1.PressStart/Pausebuttontoswitchthemachineto
pause mode.The programme follow-up light of the
relevant step during which the machine was switched into
the pause mode will flash.
2.WaituntiltheLoadingDoorcanbeopened.
3.OpentheLoadingDoorandaddortakeoutthelaundry.
4.ClosetheLoadingDoor.
5.Makechangesinauxiliaryfunctions,temperatureand
speed settings if necessary.
6.PressStart/Pausebuttontostartthemachine.
4.16 Cancelling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
willbecancelled.End/Cancellightwillflashcontinuouslyto
notifythattheprogrammehasbeencanceled.
Pumpfunctionisactivatedfor1-2minutesregardlessofthe
programme step,and whether there is water in the machine
ornot.Afterthisperiod,yourmachinewillbereadytostart
with the first step of the new programme.