Belkin Bluetooth USB Adapter F8T012 User manual

Bluetooth® Technology USB Adapter
F8T012 - F8T013
Connect your peripherals and
computing devices without cables
User Manual
for Windows Vista Driver
F8T012 - F8T013
EN
FR
DE
NL
ES
IT
PT
CZ
PL
HU
RU
SK

Table of Contents
Requirements ........................................................................................................ 4
Installation ............................................................................................................ 5
Finding & Pairing with other Bluetooth Devices .................................................... 12
Viewing Services on other Bluetooth Devices ....................................................... 16
Sending/Receiving Files ...................................................................................... 18
Connecting to a Bluetooth Headset ..................................................................... 21
Connecting to the Internet over a Mobile Phone ................................................... 23
Synchronising a PDA or Mobile Phone with a PIM ................................................ 24
UK-3

Requirements
To use the BTW 6 Software, you will need:
· 1 GHz 32-bit (x86) or 64-bit (x64) Processor
· 512 MB of System Memory
· Windows Vista Operating System
UK-4
UK-4

Installation
After inserting the CD into the drive, you will be presented with the following screen:
Click ‘Install Bluetooth Software (Vista Only)
UK-5
UK-5

Plug the Adapter in when requested.
Installation
UK-6
UK-6

Installation
Windows will then detect the Hardware and request a Driver.
Click ‘Locate And Install Driver’
Click ‘Next’ to let Windows search the CD for Drivers
UK-7
UK-7

Installation
You may get a warning that the Publisher of the Driver cannot be verified.
Click ‘Install This Driver Software Anyway’
UK-8
UK-8

Installation
When the Driver has been installed you will see the above message.
Click ‘Close’.
UK-9
UK-9

Installation
The Driver for the Hardware has now been installed, the next step which is required
is to install the Bluetooth Software with which you can search for and connect to
Devices. After the Driver install has completed, the screen below should appear
automatically:
Click ‘Next’ and accept the license agreement on the following screen, click ‘Next’
there as well, and then click ‘Install’.
UK-10
UK-10

If you wish to change the standard
installation folder, click ‘Change’ and
then specify where you would like the
Software to be installed, otherwise, just
click ‘Next’.
Wait while the Software is installed.
As there are a number of things to be
installed and services to be configured,
this may take some time. Once the
installation is complete, you can click
‘Finish’.
The Bluetooth Software is now installed,
and you should have a Bluetooth Symbol
visible down in the bottom right hand
corner of the screen.
Installation
UK-11
UK-11

Finding and Pairing with other Bluetooth Devices
To connect to another Bluetooth Device
you must first find it over Bluetooth, and
then create a Pairing between the two
devices, using a Passkey.
First of all, double click the Bluetooth
Symbol in the System Tray (bottom right
hand corner of the screen).
Go to the ‘Devices’ tab and click ‘Add’
Make sure that Bluetooth is turned on,
on the other Device, and that the Device
is set to be ‘discoverable’. Then tick the
option, ‘My Device Is Set Up And Ready
To Be Found’ and click ‘Next’.
UK-12
UK-12

Finding and Pairing with other Bluetooth Devices
You will then see all the Bluetooth
Devices which have been found. Click
your Device, and click ‘Next’.
On the next screen you need to enter
the Passkey. You can select whether
you want Windows to generate a
Passkey for you, use a specific Passkey
contained in the documentation of the
Device, or choose a Passkey yourself.
UK-13
UK-13

Finding and Pairing with other Bluetooth Devices
If the Device to which you are connecting has a Keypad of some sort on which you
can enter a Passkey, select the option ‘Choose A Passkey For Me’. In the case of
Devices such as Bluetooth Headsets, GPS Receivers etc, on which it is not possible
to enter a Passkey, select ‘Use The Passkey Found In The Documentation’ and then
enter the Key found in the Manual of the Device. Then click ‘Next’.
If you selected ‘Choose A Passkey For Me’ the Passkey will appear on the screen.
When prompted, enter this Passkey on the other Bluetooth Device.
UK-14
UK-14

Finding and Pairing with other Bluetooth Devices
Once the Pairing is complete you will
see this screen:
Click ‘Finish’.
UK-15
UK-15

Viewing Services on other Bluetooth Devices
Once you have paired with other Bluetooth Devices you will see them on the
‘Devices’ tab of the Bluetooth Software.
To see which services the Device in question offers to other Bluetooth Devices,
select the Device by clicking on it with the left hand mouse button, and click
‘Properties”. You will then see all the available services.
UK-16UK-16

Viewing Services on other Bluetooth Devices
UK-17UK-17
You can enable or disable individual services by ticking or unticking them.

Sending or Receiving files
To send a file to a Remote Device, right
click the Bluetooth Symbol in the bottom
right hand corner of the screen.
A menu will appear, select ‘Send a File’
On the next page you have to select
the device to which you want to send
a file. Click ‘Browse’ to see a list of
the available Devices. If you have not
already set up a Pairing with the Device,
you will need to so. Refer to the steps
in Section 3 ‘Finding and Pairing with
Devices’ for information on how to do
this.
Once you have selected the device to
which you want to send the file, you will
need to select the file you want to send.
UK-18
UK-18

Sending or Receiving files
UK-19
UK-19
Click ‘Next’, and in the following window
click ‘Browse’, select the file you want
to send, and then click ‘Next’.
The file will then be sent. Once the
transfer is complete you will see a page
with information about the transfer. Click
‘Finish’

Sending or Receiving files
Receiving Files:
To receive files from other Devices, right click the Bluetooth Symbol and select
‘Receive a File’. You will then see the following screen:
Then just send the file from the other Device.
UK-20
UK-20