Belkin F4U047-RS User manual

USB 2.0 Ethernet Adapter
User Manual
8820-00931 F4U047

SAFETY INSTRUCTIONS
USB 2.0 Ethernet Adapter
• Keep this User Manual for future reference
• Keep equipment away from humidity
• If any of the below scenarios arise, be sure to get
your equipment checked by a service technician:
• The adapter has been exposed to moisture
• The adapter has been dropped and damaged
• The adapter has obvious signs of breakage
• The adapter has not been working correctly
or you cannot get it to work according to
the instructions listed in the User Manual

Table of Contents SECTIONS 1 2 3 4
TABLE OF CONTENTS
USB 2.0 Ethernet Adapter
Introduction .............................1
Features . . . . . . . . . . . . . . . . . . . . . . 2
Package Contents . . . . . . . . . . . . . . . . .2
System Requirements . . . . . . . . . . . . . . .2
LED Status. . . . . . . . . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Windows 2000/XPWindows Vista/Windows 7 . . 3
Mac OS X v10 x . . . . . . . . . . . . . . . . . . 7
Specifications ..........................12
Regulatory Compliance ..................13
FCC Conditions . . . . . . . . . . . . . . . . . 13
CE . . . . . . . . . . . . . . . . . . . . . . . . 13
WEEE Information . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . 14

1 USB 2.0 Ethernet Adapter
Table of Contents SECTIONS 12 3 4
INTRODUCTION
The Belkin USB 2.0 Ethernet Adapter allows your computer to instantly connect to a 10/100Mbps network through a USB port. It is also
an ideal USB-to-LAN alternative for gaming consoles that need network access in an environment lacking wireless capability.

2 USB 2.0 Ethernet Adapter
Table of Contents SECTIONS 12 3 4
INTRODUCTION
Features
• Features
• Compliant with USB 2.0 specification
• Compliant with IEEE 802.3 (10Base-T) and
802.3u (100Base-Tx) standards
• Supports both full-duplex and half-duplex operations
• Supports suspend mode and remote wakeup via link-up and
magic packet
• Powered by USB port only
• Equipped with diagnostic LEDs
• Plug-and-play installation
Package Contents
• Belkin USB 2.0 Ethernet Adapter
• CD (Driver and User Manual)
• Quick Installation Guide
System Requirements
• IBM compatible Pentium® 233MHz or faster PC or
Mac® computer
• 64MB RAM or more
• One available USB port
• Windows® 2000, XP, Windows Vista®, Windows 7
• Mac OS® X v10.x
LED Status
LED Color Description
Power Green On for connections to a 100Mbps network
Off for connection to a 10Mbps network
or not connected
Link Yellow LAN activity; blinking when there is data flow
between LAN and the host computer

3 USB 2.0 Ethernet Adapter
Table of Contents SECTIONS 1 23 4
INSTALLATION
Windows 2000/XP/Windows Vista/Windows 7
Do not connect the adapter to your computer before you install
the provided driver.
Note: Installation steps may differ slightly different based on the
version of your operating system.
1. Insert CD into your disk drive
2. Double-click on “My Computer”
3. Double-click on “Driver (D:)”

4 USB 2.0 Ethernet Adapter
Table of Contents SECTIONS 1 23 4
INSTALLATION
4. Double-click on the file “Setup”

5 USB 2.0 Ethernet Adapter
Table of Contents SECTIONS 1 23 4
INSTALLATION
5. In order to begin installation, click on “Next” 6. Click “Install”

6 USB 2.0 Ethernet Adapter
Table of Contents SECTIONS 1 23 4
INSTALLATION
7. Click “Finish”
Note: You may be prompted to restart your computer in order to
complete installation.
8. Plug in your Belkin USB 2.0 Ethernet Adapter and connect your
Ethernet cable (not included)

7 USB 2.0 Ethernet Adapter
Table of Contents SECTIONS 1 23 4
INSTALLATION
1. Insert the provided driver CD into your CD drive
2. Double-click the CD on your desktop
MAC OS X v10.x
3. Double-click on the “Mac” folder