Belkin F5U541 User manual

P73492 F5U541
FireWire to SCSI Adapter
Guide d’utilisation de
l’adaptateur FireWire-SCSI
Manual del usuario para el
adaptador FireWire a SCSI
Manual do usuário do
FireWire-adaptador SCSI
Ca
Es
Po
En

Table of Contents
Ca
Es
Po
En
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français (Canada) . . . . . . . . . . . . . . . . . . 11
Español . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Portuguese . . . . . . . . . . . . . . . . . . . . . . . 31

The Belkin FireWire to SCSI Adapter is configured with a
DB25 female connector for the SCSI peripheral interface and
an IEEE 1394 type-B connector for the FireWire host
interface. Using the appropriate cable, the FireWire to SCSI
adapter can be interfaced to either a 4- or 6-pin IEEE 1394
host interface. An LED indicates power and activity on the
SCSI bus. The FireWire to SCSI Adapter draws its power from
either the IEEE 1394 bus, or from the SCSI device
termination power line. A power input connector is also
provided in situations where additional power is required.
Overview
1
Package Contents:
FireWire to SCSI Adapter
6-Pin to 6-Pin FireWire Cable
Driver Installation CD
Registration Card
This User Manual
En

System Requirements
2
Windows®Platform:
FireWire-enabled desktop or laptop computer running
Windows 98 SE, Windows 2000, or Windows Me
Macintosh®Platform:
FireWire-enabled G3 Power Mac™computer running
Mac® OS 8.6 or later with Apple®FireWire 2.4

Hardware Installation
1) Connect your SCSI device to the FireWire to
SCSI Adapter.
2) Connect the FireWire to SCSI Adapter to the
FireWire port of the host computer.
3) If you are using a power supply to operate the
FireWire to SCSI Adapter in self-powered mode,
connect it at this time.
3
En

4
Software Installation
Windows 98 SE/2000/Me Systems:
• Windows 98 SE only
1) Insert the CD containing the Windows 98 SE QFE drivers
2) Follow the on-screen instructions
Note: No driver installation is required for Windows 2000
or Me
Apple®iMAC™/G3/G4 Systems:
1) Insert the Installation CD-ROM
2) Click on the "SCSI Installer" icon
3) Follow any instructions displayed on the screen
• The Mac SCSI Driver files will be copied to
the Mac OS System Folder
Files include:
1) SCM FW SCSI Driver —Generic SCSI device driver
2) FW SIM Module —SIM Library file

Specifications
5
FireWire:
• Complies with IEEE 1394a-1995 "FireWire" specifications
• Single port 1394 leaf node device
• SBP2–compliant (works with generic OS SBP2 protocol
drivers, if any)
• Asynchronous transfers supported
Electrical:
Power requirement, internal operation: 250mA
Maximum at 5V +/- 20%
Power derived from best possible source of the three
modes available:
1) Bus Power (power supplied by FireWire bus)
2) Self Power (power supplied by optional external source)
Optional Power Supply Specificaitons:
2.33mm DC Power Plug +9V DC, 500mA
3) SCSI Termination Power (power supplied SCSI device)
The chipset internally operates at 3.3V and 5V
En

Specifications
6
SCSI Specifications:
Supports a single SCSI peripheral (daisy-chaining of SCSI
devices not supported)
Supports synchronous and asynchronous modes
Supports SCSI-2 devices
Devices Supported:
Hard Disk drives, Removable Disk drives, Scanners,
Printers, MO, CD-ROM, CDR, and CDRW drives
Performance:
5Mbps in asynchronous mode
10Mbps in synchronous mode