Belkin Laptop Power Adapter User manual

Laptop Power Adapter for home/travel 
User Manual
ENGLISH
FraNçaIS
ESpañoL
ItaLIaNo
SuomI
DaNSk
NorSk
poLSkI
ČeSky
Magyar
türkçE
eλληνικά

Congratulations and thank you for purchasing the Laptop Power Adapter for travel from
Belkin. This new Adapter eliminates the need for multiple power supplies in today’s mobile
society. A user can connect to the most common sources of power including AC wall
sockets, cigarette-lighter assemblies (CLAs) that supply DC power from an automobile
battery, and DC power from a specially designed Belkin battery that can be connected to the
Adapter for short-term needs.
Through the use of patented power-tip technology, this Adapter will not only charge the most
popular laptops (12 tips are included), it will also charge the latest digital devices, including
cell phones, digital cameras, camcorders, portable DVD players, MP3 players, and more.
Introduction

For terms and conditions, to activate your warranty, and to register your Laptop Power
Adapter, please visit www.belkin.com/europe-powersupply.
Product Registration and Warranty
For information on this product disposal please
refer to http://environmental.belkin.com

Before use, please read the following important safety information.
Following these simple guidelines will ensure trouble-free operation and optimal
performance of the Laptop Power Adapter and compatible electronic devices.
1. Avoid pulling on the cords and cables. Always grip plugs firmly when unplugging from
power source and when disconnecting cables. Never force a power tip into an electronic
device.
2. Before use, completely review power-tip compatibility information found in the
instructions, or at www.belkin.com/ europe powersupply.
WARNING: Using the wrong power tip may damage your electronic device or cause it
to malfunction.
3. To avoid electrical hazard, be sure to unplug the Adapter from its external power source
before attaching the power tip.
4. For indoor use only. Avoid exposure to external heat sources; direct, prolonged sunlight;
dust; corrosive chemicals; and moisture.
5. It is normal for power adapters to become warm during use. Avoid touching the device
during use. Avoid placing in direct sunlight or near heat-sensitive materials.
6. Do not drop or subject the Laptop Power Adapter to undue shock.
7. Do not place anything on top of the Laptop Power Adapter.
8. Always use the supplied cables and connectors as shown. Use of cables, connectors, or
accessories not supplied with this product constitutes misuse and may result in injury or
damage.
9. Do not attempt to service or disassemble. The unit is not user-serviceable. Attempting
to disassemble or service the unit can result in electrical hazard, including death from
exposure to high voltage. If you experience problems with the unit, discontinue use and
contact Belkin for assistance. Attempting to open or service the unit voids all warranties,
express or implied.
Important: Safety Information

AC Wall Outlets: The Laptop Power Adapter for travel can be operated from any standard
wall outlet using the attached AC power cord. After attaching the appropriate power tip (see
the “Tip Selection” section) to the output cable of the power supply, insert or attach the tip
to your device to begin charging. Power will immediately be delivered to your device whether
it is powered on or not. Generally, if your unit is not powered on, the battery will begin to
charge. It is normal for power supplies to be warm during use. Avoid placing it near heat
sources, direct sunlight, or heat-sensitive materials.
Air/Auto/Boat/RV: When mobile, the Laptop Power Adapter for travel can be operated using
the cigarette-lighter assembly (CLA) designed by Belkin, provided with this Laptop Power
Adapter. As noted above, after attaching the appropriate power tip (see section VI) to the
output cable of the power supply, insert or attach the tip to your device. Next, insert the CLA
into the socket provided in your vehicle. Power will now be supplied to your laptop or other
mobile device.
Many low-power devices, such as cell phones, PDAs, and MP3 players, can be powered
using the standard USB output. Simply insert the USB cable provided with your device into
the USB port to begin charging or to supply power.
Using the Laptop Power Adapter

Technical Specifications
Input Voltage (AC) 100–240V
Input Voltage (CLA) 12–16VDC
Input Voltage (backbone – battery) 12–16VDC
Output Voltage 16–24V
Output Current 5A (max)
Output Power 69W
USB Output 5V @ 0 to 0.5A
Unit Dimensions 152 x 66 x 32mm
Weight 433.7g
AC Input Cable 635mm
DC Power Output Cable 172.7cm
CLA Cable 51.5cm
Storage Temperature -40 to 85° C
Operating Temperature 0 to 40° C
Relative Humidity (non-condensing) 95%, max
Built-In Circuit Protection Overvoltage, undervoltage,
over temperature

Belkin has made life easy for you by providing your new Laptop Power Supply with twelve (12)
power tips for virtually any PC-based laptop.*
To get going, follow these easy steps:
Unplug power supply
Choose power tip (see the “Tip Selection”x section and Tip Compatibility List)
Connect tip to output cable
Plug tip into laptop
Plug in power supply
If you wish to connect to a device using the built-in USB connector, the steps are similar:
Unplug power supply
Connect device cable to USB port
Plug cable into device
Plug in power supply
Getting Connected

Tip Selection
Each laptop has a specific tip that can be used for power. These tips have different
dimensions and deliver different levels of current and voltage. It is important that you
choose the correct tip for your laptop.
Belkin has provided twelve (12) of the most popular laptop tips with this device (see table
below). The tips can be used with laptops from major manufacturers that include HP®,
IBM®, Toshiba®, Sony®, Dell®, and others.
Power-Tip Compatibility List
Tip # Laptop Manufacturer
1 Acer®
3 Gateway®, Acer, IBM
4 IBM
5 Hewlett-Packard®, NEC®, Toshiba
6 Panasonic®, Sony
7 Sony
8 Toshiba
11 Compaq®
29 Compaq, Hewlett-Packard
36 Dell
125 IBM
129 Hewlett-Packard
*Laptop Guarantee: If we didn’t include a tip for your laptop, tell us at www.belkin.com/europe-powersupply
and we’ll ship your first tip free! (Excludes Apple®laptops)

If your device is not charging or operating properly, take the following steps:
1. Disconnect the Laptop Power Adapter from its power source.
2. Verify that the correct power tip has been installed by checking the Power-Tip
Compatibility List. NEVER force a power tip into an electronic device.
3. Reconnect the Laptop Power Adapter. Check that all connections are secure.
4. Plug the correct power tip into your electronic device. The device should begin charging
regardless of whether it is powered on or not.
5. Note that if the green power-indicator LED does not light, it may have simply burned out.
6. If you are still experiencing problems, please contact Belkin.
Troubleshooting

CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the F5L010, to which
this declaration relates, is in conformity with Generic Emissions Standard EN 55022 and with
Generic Immunity Standard EN 55024 and LVD 1998.
Belkin International, Inc., Limited Lifetime Product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product
that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for the 3-Year Warranty.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge (except for
shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin for
inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines
that the Belkin product has been improperly installed, altered in any way, or tampered with.
The Belkin Product Warranty does not protect against acts of God such as flood, earthquake,
lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence,
abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.
Information