Belkin OmniView ENTERPRISE F1DE008B User manual

STEP 1: Remove the contents from the box.
STEP 2: Install the rack-mount brackets and place
the unit on a rack.
STEP 3: Set the BANK address for the Expander. STEP 4: Attach the Daisy-Chain Cable (Belkin part number
F1D9402-XX) to an available daisy-chain port of the
previous KVM Switch or Expander, making sure that the
daisy-chain cables are only connected in an “in-to-out”
or “out-to-in” configuration.
™
OmniView
ENTERPRISE Series 8-Port EXPANDER
Quick Installation Guide
STEP 5: Attach the Enterprise Series Dual-Port KVM Cables
to the Expander (Belkin part number F1D9400-XX
or F1D9401-XX).
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
daisychain OUT
DIP SWITCH # BANK ADDRESS
12 3 4
UP DOWN DOWN DOWN BANK 01
DOWN UP DOWN DOWN BANK 02
UP UP DOWN DOWN BANK 03
DOWN DOWN UP DOWN BANK 04
UP DOWN UP DOWN BANK 05
DOWN UP UP DOWN BANK 06
UP UP UP DOWN BANK 07
DOWN DOWN DOWN UP BANK 08
UP DOWN DOWN UP BANK 09
DOWN UP DOWN UP BANK 10
UP UP DOWN UP BANK 11
DOWN DOWN UP UP BANK 12
UP DOWN UP UP BANK 13
DOWN UP UP UP BANK 14
UP UP UP UP BANK 15
P74044_F1DE008B_qksetup.qxd 7/15/02 11:36 AM Page 1

™
OmniView
ENTERPRISE Series
8-Port EXPANDER
ENTERPRISE Series
STEP 6: Connect the other end of the KVM Cable to the servers. STEP 7: Connect the IEC power cable to the Expander and
power up the unit.
STEP 8: Power up the connected servers. Check for keyboard,
video, and mouse function on the console of your
primary switch.
Quick Installation Guide
P74044
F1DE008B
belkin.com
Belkin Components
310.898.1100
Compton • CA • 90220 • USA
Belkin Components, Ltd.
[phone]
Shipton Way • Rushden • NN10 6GL • United Kingdom
Belkin Components, Ltd.
[phone]
West Gosford • NSW 2250 • Australia
© 2002 Belkin Components. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.
fig. 6 – PS/2 connection
fig. 7 – USB connection
fig. 8
P74044_F1DE008B_qksetup.qxd 7/15/02 11:36 AM Page 2