Belkin F5D6020_ver1 User manual

F5D6020 PCMCIA Wireless Notebook Network Adapter XP Installation
1. Insert the PCMCIA card into you
Notebook PC. Turn on the power
to the PC. After Windows XP
starts up, the “Found New
Hardware Wizard” will begin.
Select “Install from a list or
specific location (Advanced)”.
Click “Next”.
2. The screen on the right will appear.
Make sure that the CD is inserted
into your CD-ROM drive and
check’ “Search removable media
(floppy, CD-ROM). Click “Next”.
3. The “Windows Logo Testing” screen
will appear. This does not mean
there is a problem.
Click “Continue Anyway” to
continue.

4. Windows will install the drivers.
When finished, the screen to the
right will appear. Click “Finish”
to complete the installation.
Hardware and driver installation is now complete for Windows
XP. The next step is to install the Belkin 11Mbps Wireless
Configuration Utility.
1. Insert the CD-ROM that came with your Belkin Wireless Notebook Network
Card into your CD-ROM.
2. From your Start Menu click on the “My Computer” icon, and then double-click
on your CD-ROM Drive.
3. Double-click on the Setup icon.
Windows will automatically install the
program onto your PC.
4. The Welcome Screen will appear
prompting you to exit out of any
existing programs currently running.
Click “Next”.

5. The Choose Destination Folder
window will appear. Belkin
recommends that you use the default
folder specified however you have the
option of selecting a custom location.
Click “Next”.
6. The Select Program Folder window
will appear. Belkin recommends that
you use the Default folder specified
however you have the option of
choosing the folder where the program
icons are stored. Click “Next”.
7. Setup is Complete.
You may run the utility program by double clicking on the
“Configuration Utility” program icon.