Belkin F1PI242EGAU Reference guide

Self Help Guide
F1PI242EGau
F1PI242ENau
Step 1 Open Internet Explorer and type in the Address Bar http://10.1.1.1
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Click Advanced Setup
(You will be presented with the following screen)
Upgrading the Firmware on your Belkin VoIP Router
If you still require further assistance Call: 1300 554 780
contact Belkin Technical Support Visit: www.belkin.com/au/support
TSG-ANZ-VHD-12
Page 1 of 4
GD2417

Step 4 Click Tools then Firmware Upgrade
(You will be presented with the following screen)
Step 5 Click Browse, find the file in c:\Belkin\F1PI242EGau
(You will be presented with the following screen)
Step 6 Click Open
Step 7 Click Upgrade Firmware, then OK
(You will be presented with the following screen)
If you still require further assistance Call: 1300 554 780
contact Belkin Technical Support Visit: www.belkin.com/au/support
TSG-ANZ-VHD-12
Page 2 of 4
GD2417
Self Help Guide

You will now need to restore the unit to Factory Defaults
Step 1 Open Internet Explorer and type in the Address Bar http://10.1.1.1
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Click Advanced Setup
Step 4 Click Tools then Configuration Tools
(You will be presented with the following screen)
Step 5 Place the Dot next to Restore Router to Factory Defaults and click Next
Step 6 Click APPLY
(You will be presented with the following screen)
If you still require further assistance Call: 1300 554 780
contact Belkin Technical Support Visit: www.belkin.com/au/support
TSG-ANZ-VHD-12
Page 3 of 4
GD2417
Self Help Guide

You will now need to re-enter your Username and Password Settings
Please do not use a saved configuration as it will not function correctly with
the updated firmware.
Step 1 Open Internet Explorer and type in the Address Bar http://10.1.1.1
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Under ADSL Parameter Setting Enter your Username and
Password into the fields
(You will be presented with the following screen)
Step 4 Click Save Settings
If you still require further assistance Call: 1300 554 780
contact Belkin Technical Support Visit: www.belkin.com/au/support
TSG-ANZ-VHD-12
Page 4 of 4
GD2417
Self Help Guide