Belkin AUF001 V2 User manual

How to charge your phone using the Belkin
AUF001 V2
This article will show you how to charge your phone using the Belkin SOUNDFORM™ Charge
Bluetooth Speaker + Wireless Charger, AUF001 V2.
Step 1:
Connect the Belkin AUF001 V2 to the power outlet. Make sure that the connectors are properly
plugged in.
Step 2:
Place your phone (portrait or landscape orientation) on the charging pad while ensuring center
alignment.

NOTE: The Belkin AUF001 V2 will not charge if the phone is not properly aligned on the center of
the charging pad.
How to place the additional piece for small
phones on Belkin AUF001 V2
The size of Belkin SOUNDFORM™ Charge Bluetooth Speaker + Wireless Charger, AUF001 V2
can be a bit large if you have an iPhone® 12 mini or small phone. To ensure proper fit, use the
additional strip included in the package.

This article will help you place the additional piece on the Belkin AUF001 V2.
Step 1:
Remove the cover on the strip.
Step 2:
Ensure that the edges of the strip are properly aligned.

Step 3:
Firmly place the strip on the allotted slot.
How to take phone calls using the Belkin
AUF001 V2
This article will walk you through the steps of taking phone calls using the Belkin SOUNDFORM™
Charge Bluetooth Speaker + Wireless Charger, AUF001 V2.
How to make a call
How to answer a call
How to end a call

How to make a call
Step 1:
Make sure that your phone is paired with the speaker via Bluetooth®.
Step 2:
Using your phone, dial the number you wish to call and press the Bluetooth button on the speaker
twice.
How to answer a call
If you received an incoming call while your phone is connected to the speaker, you can use the
speaker to take the call without touching your phone. When the call comes in, your phone’s ringtone
will play over the speaker. Press the Bluetooth button on the speaker twice to answer the call.
How to end a call
If you are ready to end a call while connected to the speaker simply press and hold the Bluetooth
button for 3 seconds.