Belleze Chelsea User manual

Chelsea Console Table
www.belleze.com
[email protected]
1-800-682-6376
@bellezefurniture
FOLLOW US: CONTACT INFO: ITEM NO. 014-HG-40700
The instruction booklet contains IMPORTANT
safety information. Please read it in full and
keep it for future reference.

2
LB
Estimated time for assembly:
Weight limitations are as follows:
60 mins
Scan this QR Code
to view our online tutorial
Maximum Load
88 lb
Maximum Load
10 lb

3v.03102022
Assemble the furniture on an empty carton, carpet, or rug to prevent scratches
or damage.
For safety, please keep pets and children away from the assembly area.
Ensure the product is fully assembled before use. If you are missing any
hardware or products, do not use it until you have restored the missing parts.
This furniture requires 2 people for assembly.
Read this instruction manual prior to assembly to familiarize yourself with the
various steps.
Lay out all components and hardware separately on at surface and make
sure that no parts are missing or damaged before assembly. Do not destroy or
discard any packaging until you are certain that you have all the necessary parts
for assembly.
CAUTION
There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking
hazard.
Keep all plastic bags and packaging lm away from pets and children to avoid
su󰀨ocation.

4
PACKAGE CONTENTS
1
2
3
4
5
6
7
8
16
17
9
11
11
12
12
13
13
14
14
15
15
9
10

5v.03102022
PACKAGE CONTENTS
CODE DESCRIPTION QTY
1Table Top 1
2 Bottom Board 1
3 Left Side Board 1
4 Center Divider 1
5 Right Side Board 1
6 Back Panel 1
7 Left Support Frame 1
8 Right Support Frame 1
9 Support Cross Bar 2
10 Bottom Cross Bar 1
11 Drawer Front Panel 2
12 Drawer Left Board 2
13 Drawer Right Board 2
14 Drawer Bottom Panel 2
15 Drawer Back Board 2
16 Left Leg 1
17 Right Leg 1

6
12x +1
6 x 30mm
6 x 40mm 6 x 30mm
6 x 30mm 4 x 12mm
4 x 40mm
4 x 16mm
3.5 x 12mm
6 x 35mm
15 x 10mm
6 x 10mm
8x +116x +2
6x2x 16x +2
14x +1 14x +1
24x +22x
2x
PACKAGE CONTENTS
AB C
DE
F
GH
I
J
N
CL
DL
DR
CR

7v.03102022
3
CR
CR
5
4
CL
CL
H
H
H
Required tools for assembly (Not included)
1
3.5 x 12mm
12x
2x
2x
H
CR
CL
Be careful to ensure proper alignment when placing the screws.
Place screw in the 1st opening from the roller.
Be careful to ensure proper alignment when placing the screws.
Place screw in the 2nd opening from the roller.
Assemble drawer slides on the side boards (3)(5) and center divider (4).

8
3
2
1
C
5
1
A3
4
6 x 35mm
C
6x
6x
The groove side.
C
A
6 x 30mm
Attach cam bolt on the underside of the table top (1).
Attach side boards (3)(5) and center board (4) on the underside of table
top (1) with wood dowel.

9v.03102022
4
5
D
6
6x
D
15 x 10mm
Secure the assembly with cam locks.
Slide the backboard into the groove.

10
7
6
2
A
B
6x
6x
A
B
6 x 30mm 4 x 40mm
Attach the bottom board.
Screw down the bottom board.

11 v.03102022
8
9
N
7
9
9
8
I
2x
4x
2x
N
I
N
4 x 12mm 6 x 40mm
Attach anti-tipping bracket onto the bottom board.
Start putting together the support frame.

12
10
11
16
17
8
9
9
7
E
I
6 x 10mm
4x
E
2x
I
6 x 40mm
16
17
Attach legs to the support frame.
Secure the legs on the support frame.

13 v.03102022
12
13
J
E
10
6 x 10mm
4x
E
16
17
6 x 30mm
2x
J
16
17
8
9
9
7
Secure the legs on the support frame.
Attach bottom cross bar to the frame.

14
14
J
6 x 30mm
14x
JAlign the opening of the frame to
that of the table top.
Attach support frame to the table.

15 v.03102022
15
16
C
2x
11
12
13
D
6 x 35mm
4x
4x
C
D
15 x 10mm
Assemble 2 drawers.
Attach cam bolts onto the drawer front panel.
Attach drawer side panel to the front panel.

16
17
14
15
18
B
4x
4x
B
4 x 40mm
Slide the drawer board into the groove.
Secure the drawer back panel.

17 v.03102022
20
19
DL
DR
DR
DL
F
G
H
G
F
3.5 x 12mm
6x
1x
1x
1x
1x
H
4 x 16mm
Attach drawer slides onto the drawer.
Attach the pull handle onto the drawer.

18
21
B
N
YOU’RE FINISHED!
Slide the drawer into the table.
Install the anti-tipping device.
22
6 x 30mm
2x
2x
B
N
4 x 40mm

19 v.03102022
Warning
Serious or fatal crushing injuries may occur if the furniture tip-over.
Furniture must permanently a󰀩xed to the wall with included anti-tipping device in
order to prevent the furniture from tipping over.
Di󰀨erent wall materials requires di󰀨erent types of wall anchors or screws. Use
a suitable wall anchors or screws for your specic wall in order to secure the
stability and load bearing capacity of the furniture. If you are uncertain about
which type of device to use, please contact a hardware store.
Warning
Only place items on top of the product if they meet the recommended size and
weight limits.
Climbing on, stepping on, or placing overweighted objects on the product may
cause property damage and/or injuries.
Items placed onto this product must be resting on a support surface without
hanging over the edges.

20
FURNITURE CARE AND MAINTENANCE
Medium - Density Fiberboard
CLEANING
• Clean the surface of the MDF (medium - density berboard) with a lightly
dampened cloth.
• A small amount of mild soap can be used if necessary.
• Dry the surface immediately after cleaning.
⚠DO NOT use bleach or alcohol to clean the surface.
⚠DO NOT apply wood treatment on parts made with MDF.
MDF will swell and distort when exposed to water damage. Make sure to dry the
furniture immediately after cleaning.
MAINTENANCE
• Tighten all bolts and screws again within the rst 2 weeks of assembly.
• Check the tightness of all bolts every 2 months and tighten them if necessary.
⚠ WARNING
The manufacturer and seller are not responsible for any and all liability relating to personal injury,
property damage or losses, whether direct, indirect, or incidental, resulting from the incorrect
attachment, improper use, inadequate maintenance, unapproved modication or neglect of this
product.
Thank you for your purchase. We want your item to last as long as possible.
To ensure the product gives you years of longevity, please follow the recommendations
in this care and maintenance guide.