Belling SCGHU60GC Firmware update

1.364
Belling Gas Hobs UK
082761106 27/11/2014
Users Guide & Installation
Handbook

CONTENTS & INTRODUCTION
3.000
CONTENTS
• SAFETY
• USING THE PRODUCT
• CLEANING
• INSTALLATION INSTRUCTIONS
• TECHNICAL DATA
• CUSTOMER CARE
INTRODUCTION
Thank you for buying this
British-built appliance from us.
This guide book is designed to help you
through each step of owning your new
cooker, from installation to use. Please
read it carefully before you start using
your product, as we have endeavored to
answer as many questions as possible,
and provide you with as much support
as we can.
If,however,youshouldndsomething
missing, or not covered, please contact
our Customer Care team. Their number is
located on the back page of this book.
For customers outside the UK and
Northern Ireland, please contact your
local supplier.
When you dial this number you will hear
a recorded message and be given a
number of options. This indicates that
your call has been accepted and is
being held in a queue. Calls are answered
in strict rotation as our Customer Care
representatives become available.
Alternatively, general information, spares
and service information is available from
our website. The address is located on the
back page of this book.
WARRANTY
Your new appliance comes with our
12-month guarantee, protecting you
against electrical and mechanical
breakdown. To register your appliance
please call 0844 481 0182, complete
the registration form included or register
online at the web address located on the
back page of this book.
For full terms & conditions of the manu-
facturer’s guarantee, refer to the website
on the back of this book.
In addition, you may wish to purchase
anextendedwarranty.Aleaet
explaining how to do this is included
with your appliance.
European Directives
As a producer and a supplier of cooking
appliances we are committed to the pro-
tection of the environment and are in the
compliance with the WEEE directive. All
our electric products are labelled accord-
ingly with the crossed out wheeled bin
symbol. This indicates, for disposal pur-
poses at end of life, that these products
must be taken to a recognised collection
points, such as local authority sites/local
recycling centres.
This appliance Complies with European
Community Directives (CE) for household
and similar electrical appliances and Gas
appliances where applicable.
This appliance conforms to European Di-
rective 2009/125/EC regarding Eco design
requirements for energy-related products.

CONTENTS & INTRODUCTION
3.000
Our policy is one of constant
development and improvement,
therefore we cannot guarantee the strict
accuracy of all of our illustrations and
specications-changesmayhavebeen
made subsequent to publishing.
GAS WARNING
If you smell gas:
Do not try to light any appliance.
Do not touch any electrical switch.
Call the Gas Emergency Helpline at
0800 111999

SAFETY
5.140
BEFORE USING THE PRODUCT
Make sure that you have removed all
packaging and wrapping. Some of the
items inside this appliance may have ad-
ditional wrapping.
GENERAL
WARNING! - The
appliance and its
accessible parts become
hot during use. Care
should be taken to
avoid touching heating
elements. Children less
than 8 years of age shall
be kept away unless
continously supervised.
This appliance can
be used by children
aged from 8 years and
above and persons with
reduced physical sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision
or instruction concerning
the use of the appliance
in a safe way and
understand the hazards
involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
without supervision.
WARNING! -
Unattended cooking on
a hob with fat or oil can
be dangerous and may
resultinre.
NEVER try to extinguish
arewithwater,but
switch off the appliance
andthencovertheame
with a lid or damp cloth.
WARNING! - Danger of
re:Donotstoreitems
on the cooking surfaces.
Never leave any cook
zone on without a pan
covering it. This causes a
rehazard.
WARNING! - Servicing
should be carried out
only by authorised
personnel.
WARNING! - The

SAFETY
5.140
appliance must never
be disconnected from
the mains supply during
use, as this will seriously
affect the safety and
performance, particularly
in relation to surface
temperatures becoming
hot and gas operated
parts not working
efciently.Thecooling
fan(iftted)isdesigned
to run on after the
control knob has been
switched off.
WARNING! -
Do not spray aerosols
in the vicinity of this
appliance while it is in
operation.
WARNING! - Do not
storeoruseammable
liquids or items in the
vicinity of this appliance.
WARNING! -
Do not modify this
appliance.
WARNING! - Do not
operate the appliance
without the glass panel
correctlytted.
WARNING! - There is
a risk of electric shock,
so always make sure
you have turned off
and unplugged your
appliance before
starting. Always allow
the product to cool down
before you change a
bulb.
WARNING! - Do not
modify the outer panels
of this appliance in any
way.
WARNING! - This
appliance must be
earthed.
WARNING! - The top
element gets extremely
hot when in use, so take
care to avoid touching it.
WARNING! - The use of
inappropriate hob guards
can cause accidents.

SAFETY
5.140
GAS WARNING! -
Ifyousmellgas:
Do not try to light any
appliance.
Do not touch any
electrical switch.
Contact your local gas
supplier immediately.
Caution: This appliance
is for cooking purposes
only. It must not be used
for other purposes, for
example room heating.
Caution: The use of a
gas cooking appliance
results in the production
of heat, moisture and
products of combustion
in the room in which it is
installed. Ensure that the
kitchen is well ventilated
especially when the
appliance is in use.
Keep natural ventilation
holes open or install a
mechanical ventilation
device (mechanical
extractor hood).
Prolonged intensive use
of the appliance may call
for additional ventilation,
for example opening
of a window, or more
effective ventilation,
for example increasing
the level of mechanical
ventilation where
present.
Do
• Always ensure that pan bases are dry
andatbeforeusingthemonthehob.
• Always position pans over the centre
of the heat zone, and turn the
handles to a safe position so they
cannot be knocked or grabbed.
• Always use pans which are no smaller
than 100mm (4”), or larger than
250mm (10”).
• Always match the size of pan to the
size heat zone – do not use large
pans on small zones or vice versa.
• Always make sure that the burner
caps, rings and pansupports are cor-
rectly placed. This will prevent pans
becoming unstable while in use and
ensureanuninterruptedgasow.
Do Not
• Never use double pans, rim-based
pans, old or misshapen pans, or
anypanthatisnotstableonaat
surface.
• Never leave cooking fat, or oil, unat-
tended.
• Never use commercial simmering

SAFETY
5.140
aids, or heat diffusers, as they create
excessive heat and can damage the
surface of the hob.
• Never use the hob for any other
purpose than cooking food.
• Plastic cooking utensils can melt if
they come into contact with a warm
hob. Never leave them close to, or
on top of the hob.
• Never leave any heat zone alight
without a pan covering it. This
causesarehazard.
• Never leave an empty pan on a heat-
ing zone.
• Never leave anything lying on the
hob.
Fire Safety Advice
Mostkitchenresoccurwhenpeopleare
distracted or leave things unattended.
Don’t let yourself be distracted while
cooking. If you’re called away from the
cooker, either take pans off the heat, or
switch off your hob.
Don’t let yourself be distracted while
cooking.
Ifyoudohaveareinthekitchen,don’t
take any risks - get everyone out of your
home and call the Fire Brigade.
If a pan catches re:
• Do not move it - it is likely to be
extremely hot.
• Turn off the heat if it’s safe to do so
- but never lean over a pan to reach
the controls.
• Ifyouhaveareblanket,putitover
thepan.Ifyouhaveputthereout,
leave the pan to cool completely.
Deep-fat frying presents more dan-
gers in your kitchen.
• Neverllachippan(orotherdeep-
fat fryer) more than one-third full of
oil
Donotuseareextinguisheronapan
of oil - the force of the extinguisher can
spreadthereandcreateareball.
If you have an electrical re in the
kitchen:
• Pull the plug out, or switch off the
power at the fuse box - this may be
enoughtostopthereimmediately
• Smothertherewithareblanket,
or use a dry powder or carbon diox-
ide extinguisher
• Remember:neverusewateronan
electricalorcookingoilre.
DISPOSAL
Packaging Material
The packaging materials used with this
appliance can be recycled.
Please dispose of the packaging materials
in the appropriate container at your local
waste disposal facilities.
Old Appliances
The Symbol on the product or on
its packaging indicates that this product
may not be treated as household waste.
Instead it should be taken to the appli-
cable collection point for the recycling of
electrical and electronic equipment.
You will by ensuring the appliance is cor-
rectly disposed of help prevent potential
negative consequences for the environ-
ment and human health.
For additional details regarding the recy-
cling of this product please contact your
localgovernmentofce,yourhousehold

SAFETY
5.140
waste disposal service or the retailer
where you purchased the product.
Avoiding damage to the appliance.
Objects that melt and things that boil
over can burn onto the hob and should be
removed as soon as possible.
To avoid damage to cookware do not al-
low sauce pans or frying pans to boil dry.
Do not use the cooking zones with empty
cookware or without cookware in place.

6.000
USING THE HOB - GAS
• If your hob is supplied with left and
right handed pan supports, ensure
that they are located over the align-
mentpinsandaresittingatonthe
hob.
• Use pans which are large enough to
avoidoverowsontothehobsurface.
• Wipe any spillage as soon as pos-
sible.
• Clean the hob top as regularly as
possible, this will prevent any build
upofgreasewhichmaybeare
hazard.
• Pans should not be allowed to come
into contact with coloured trims dur-
ing use as this may cause discoloura-
tion of the surface
Hob Ignition & Use
• To turn on burners other than WOK,
push in and turn the control knob
tothefullonposition(largeame
symbol). If your hob has an ignition
switch on the facia, press it in until
your burner lights.
• Hold the control knob in for 15
seconds then release. If the burner
fails to light within this time, release
the control knob and wait one minute
before attempting to re-ignite.
• ToturnontheWOKburner(iftted),
turn the WOK burner control knob
tothesimmerposition(smallame
symbol). Push in the control knob
and after a couple of seconds press
the ignition switch.
• Hold the control knob in for 15
seconds then release. If the burner
fails to light within this time, release
the control knob and wait one minute
before attempting to re-ignite.
• NOTE:AftertheWOKburnerislit,
please allow the burner to warm up
for a few minutes before placing the
pan over it.
• To simmer, turn the control knob
tothesmallamesymbol.Thiswill
ensurethattheameisjustlarge
enough to gently heat the contents of
the pan.
• To turn off, turn the control knob
clockwise to the ‘off’ position.
• Always make sure that your pans are
placed centrally on the burners and
donotallowtheametoextendover
the base of the pan.
• Avoid the use of pans that overhang
the edges of the hotplate.
In the event of a power failure, or the
ignition not working, then a lighted match
or taper can be used to light the burner.
Energy Saving
• Position pans centrally over the ele-
ments.
• Only heat the amount of liquid you
need.
• Once liquids have been brought to
the boil, reduce the heat setting to a
simmer.
• Consider using a pressure cooker if
possible.
• Vegetables cut into small pieces will
cook more quickly.
• Use a pan which is a close match to
your burner size.
• Smaller burners are ideal for sim-
mering and stewing in smaller pans,
while the larger burners are ideal for
frying and boiling.

USING THE HOB - GAS
6.000
FOLD DOWN LID (IF FITTED)
Caution: Glass lids may shatter when
heated. Turn off all the burners before
shutting the lid.
When opening and closing the lid, use the
cooler outer sides of the lid glass.
The lid must be opened fully, so there is
no danger of it closing while the hob is
being used.
Appliancesttedwithglasslidsaretted
with a safety system which will auto-
matically turn off the hot plate burners if
they are inadvertently left on as the lid is
closed.
The lid is not intended to be used as a
work surface, as it becomes hot when any
part of the cooker is in use, and the sur-
face may be scratched if items with rough
or sharp surfaces are placed on it.
WOK RING (IF SUPPLIED)
The wok ring should only be used
with a wok. No other style of pan is
suitable for use with this accessory.
If desired, the wok ring should be located
on top of the pan supports around the
centre burner.
The locating cutouts on the bottom of
thewokringengagewiththefourngers
of the pan supports around the centre
burner location.
Ensure the wok ring is located correctly, is
fullyengagedwiththepansupportngers
and is not able to rotate or slide across
the pan supports before use.
Always locate the wok ring before lighting
the burner.
Caution: The wok ring will become hot
in use. Ensure it has cooled fully before
removing or cleaning it.
NOTE: Due to the temperatures the
wok ring will operate under during
use, discolouration will occur.

CLEANING
12.000
General
• It is important to clean the product
regularly as a build up of fat can af-
fect its performance or damage it and
may invalidate your guarantee.
• Always switch off your appliance
and allow it to cool down before you
clean any part of it.
• Do not use undiluted bleaches,
products containing chlorides, wire
wool or abrasive cleaners on alu-
minium, stainless steel, or plastic/
painted parts as they can damage
the appliance. Nylon pads can also be
unsuitable.
• Take extra care when cleaning over
symbols on fascia panels. Excessive
cleaning can lead to the symbols
fading.
• Ifyourproductisttedwithstainless
steel cladding strips. You may notice
a small white residue on the outer
edges, this can be removed with a
non abrasive wipe.
• Some foods are corrosive eg; vinegar,
fruit juices and especially salt - they
can mark or damage the metal or
paint work, if they are left on the
surface.
• Only use a clean cloth wrung out in
hot soapy water, and dry with a soft
cloth.
Stainless steel & Aluminium surfaces
• Stubborn marks can be removed us-
ing a stainless steel cleaner. Supplies
can be purchased from the Customer
Care Centre.
• Sharp objects can mark the surface
of stainless steel, but will become
less noticeable with time.
• Baby oil can be used to restore stain-
lesssteelnishes-butonlyusea
few drops. Don’t use cooking oils
as they can contain salts, which will
damage the metal.
Enamel surfaces & parts
• If larger splashes of fat do not readily
disappear, you can use a mild cream
cleaner to remove them.
Glass parts
WARNING:- Do not use harsh
abrasive cleaners or sharp
metal scrapers to clean the
oven door glass since they can
scratch the surface, which may
result in shattering of the glass.
Chrome plated parts
• Useamoistsoaplledpad,orplace
in a dishwasher

CLEANING
12.200
GAS HOB
Burner caps and heads
• The slots in the burner head where
theamesburnshouldbeclearedof
deposits.
• Clean with a nylon brush, rinse and
then dry thoroughly. There may be
brown coloured markings on your
burners; these are carbon deposits or
fat stains and can be removed using
asoaplledpad.
• Do not put burners in the dishwasher
or soak them. Using dishwasher pow-
ders, washing up liquids and caustic
pastes can damage the burners.
• Burner caps and heads must be
repositioned correctly so that they
sit squarely on to the hob as shown.
This is particularly important with
stainless steel models as failure to re-
position the caps correctly may result
in discolouration of the stainless steel
around the burners.
Cast iron griddle or pan supports (if
tted)
• Ensure the griddle has fully cooled
and scrape off any stubborn marks
and bits of food with a plastic or
wooden cooking implement. Rinse in
warm soapy water and dry with a
tea towel.
• Do not clean in a dishwasher.
• If you notice any rusting on your
griddle, or pan-supports, simply clean
in warm soapy water, then re-season.
• Toseason:Heatthegriddlefor
30 seconds at a medium setting then
switch off. Use a minimum amount
of unsalted vegetable oil, on a dry
cloth or paper towel, and apply a thin
coat of oil to the element surface.
Wipe off the excess and re-heat the
griddle for one minute.
incorrect
burner cap not central
incorrect
angled
correct
parallel
burner cap
burner head

INSTALLATION
13.302
Installation
This appliance must be installed in accor-
dance with the regulations in force, and
only in a well ventilated space. Read the
instructions before using or installing this
appliance.
This appliance is factory set for use with
natural gas only.
Regulations & Standards
Prior to installation, ensure that the local
distribution condition (nature of the gas
and gas pressure) and adjustment of the
appliance are compatible.
The adjustment conditions for this appli-
ance are stated on the data badge.
This appliance is not connected to a com-
bustion products evacuation device.
It shall be installed and connected in ac-
cordance with current installation regula-
tions. Particular attention shall be given
to the relevant requirements regarding
ventilation.
The appliance must be installed, convert-
ed to LPG (where necessary) and serviced
by a competent person to ensure that the
installation is in accordance with “The Gas
Safety (Installation & Use) Regulations”, &
the “The Gas Safety (Installation & Use)
(Amendment) Regulations ”.
Failure to comply with these Regula-
tions is a criminal offence.
Where regulations or standards have been
revised since this handbook was printed,
always use the latest edition.
All gas installation, servicing and repair
work must be in accordance with local
standards and regulations
In the UK the regulations and stan-
dards are as follows (inclusive of
successive issues:
1. Gas Safety Regulations (Installation and
Use).
2. Building Regulations - Issued by the
Department of the Environment.
3. Building Standards (Scotland) (Consoli-
dated) - Issued by the Scottish Develop-
ment Department.
4. The current I.E.E. Wiring Regulations.
5. Electricity at Work Regulations.
6. BS6172 Installation of Domestic Gas
Cooking Appliances. Also, for LP Gas
refer to BS5482 Part 1, Part 2 or Part 3 as
relevant.
7. Installation & Servicing Instructions for
this appliance.
For installation in countries other than the
UK, the appliance must be connected in
accordance with all local gas and electrical
regulations.
In the Republic of Ireland, installers should
refer to IS813 Domestic Gas Appliances.

INSTALLATION
13.302
Installation above a unit with a
drawer or door
The base of the appliance must be pro-
tected from damage e.g. drawers may
only be installed providing a partition
panelisttedtotherequireddimensions
underneath the appliance.
Worktop
25mm
Oven
Hob
INSTALLATION ABOVE AN OVEN
Worktop
25mm
Partician
Hob
Partition
INSTALLATION ABOVE A UNIT WITH
A DRAWER OR DOOR
Ventilation Requirements
The room containing the appliance should
have an air supply in accordance with
BS5440:Part2
•Allroomsrequireawindowthatopens,
or equivalent, and some rooms will require
a permanent vent as well.
•Forroomvolumesupto5m3an air vent
of 100cm2is required.
•Iftheroomhasadoorthatopensdi-
rectly to the outside, or the room exceeds
10m3NO AIR VENT is required.
•Forroomvolumesbetween5m3and
10m3an air vent of 50cm2is required.
•Ifthereareotherfuelburningappli-
ancesinthesameroom,BS5440:Part
2:(orequivalent)shouldbeconsultedto
determine the air vent requirements.
•Thisappliancemustnotbeinstalledina
bed sitting room of less than 20m3or in a
bathroom or shower room.
•Windowsandpermanentventsshould
therefore not be blocked or removed with-
outrstconsultingacompetentengineer.
LP Gas only - Do not install this appliance
in a room below ground level. This does
not preclude installation into rooms which
are basements with respect to one side of
the building but open to ground level on
the opposite side.
For installation into environments other
than domestic dwellings, e.g. caravans,
boats and similar - refer to the relevant
standards on ventilation and gas supply.
Failure to install appliances correctly
is dangerous & could lead to pros-
ecution.

INSTALLATION
13.302
Clearances & dimensions
The room should have good light and
ventilation but be free from draughts.
The work top should be at least 600mm
deep, & 30mm thick to enable the cutout
to be made to the dimensions shown
below.
A minimum distance of 40mm should be
maintained between the hob and rear wall
/ combustible surface.
A minimum distance of 40mm should be
maintained between the hob and any side
walls / combustible surface.
We recommend ceramic tiling for the rear
wall directly behind the hob.
No shelf or overhang of combustible ma-
terial should be closer than 650mm above
the hob.
Extractor or cooker hoods should only be
ttedabovethehobinaccordancewith
the manufacturer’s instructions.
Nocombustiblematerialsorammable
liquids should be stored below the hob.
Sufcientlengthofcableshouldbeal-
lowed so the hob can be removed for
servicing, but make sure it is routed away
from the underside of the hob & does not
get trapped during installation.
Important: Ensure that you route all
electrical cables and exible tub-
ing well clear of any adjacent heat
source - e.g. oven / grill.
600 hob - 600mm
700 hob - 700mm
40mm
40mm
worktop
420
mm
wall unit
This area must
be kept clear
of combustible
materials 650mm
above level of
pan supports
53mm min
side wall
rear wall
555mm
490
mm
cutout
60cm hob - 53mm min
70cm hob - 103mm min
wall unit

INSTALLATION
13.302
Important Information
It is important when installing front con-
trol gas hobs, that the work top cut out is
the same as is quoted in this installation
manual. If the cut out is too large, then
batonsmustbettedtothefront,rear
and sides - to correct the discrepancy and
ensurethecorrectt.Pleaseensurethat
ifbatonsarettedtheyarelevelwiththe
top surface of the work top. Please ensure
that the seal for the hob has full contact
with the work top surface.
There are two ways to install the clamps,
depending on the thickness of the work
top. Please measure the thickness of
your work top and ensure that the cor-
rect method is used. Both methods are
detailed in the installation manual.
Failure to follow these instructions can
lead to excessive force being applied to
the base tray, which results in the clear-
ance between the control knob and the
hob top pressing being reduced. This can
effect the operation of the gas control,
and the ignition.
Base Tray
GDHA specified dimensions with batons
Existing dimension without batons
Fit the hob into the cutout & secure
to work top
Place the hob into the cutout and se-
cure in place using the four brackets
and screws
provided.
The brackets
should be ori-
entated to suit
the work top
thickness as
shown, then in-
serted into the
four slots (two
on the front
edge and two
on the rear)
and screwed into the underside of the
work top using the wood screws provided.
The screws should be tightened just suf-
cientlytosecurethehobandpullthetop
pressingushwiththeworktop.
If the base of the hob is accessible after
installationthenapartitionmustbetted
20mm below the base to prevent access.
Installation advice - cabinets
Dealing with sides, cross-rails and
back-panels in cabinets
Depending on the cabinets, the work
top thickness and the hob positioning, it
is possible for the hob base, the clamp
brackets and/or the gas connection to
interfere with parts of the cabinet. These

INSTALLATION
13.302
canbedealtwithasfollows:
Cabinet sides
If the hob is to be installed across the top
of two cabinet housing units, then the
base of the hob may interfere with the
sides of these units. It will be necessary to
cut away the top of the unit sides locally
to clear the hob, clamp brackets and/or
gas connection.
Cross-Rails
1. Interference with hob base
If there are any cross-rails which obstruct
the hob base by running across the work
top cutout, they can simply be removed or
locally cutaway to allow the hob to be in-
stalled, depending on the particular instal-
lation.Anymodicationsmustensurethat
the strength of the cabinet is maintained.
2. Interference with clamp brackets
If there are any cross-rails which prevent
the clamps from being positioned on
the front or rear edges of the hob, then
they can be removed or locally cut-away
around the brackets to allow the brackets
tobeinstalled.Anymodicationsmust
ensure that the strength of the cabinet is
maintained.
Back-panel
1. Interference with clamp brackets
If the cabinet has a back-panel which pre-
vents the clamps from being positioned on
the rear edge of the hob, then this panel
can be completely removed or locally cut-
away to allow the brackets to be installed.
2. Interference or restriction of gas con-
nection. If the cabinet has a back-panel
which interferes with the position of the
gas supply to the hob, then the panel can
be completely removed or locally cut-away
to allow connection to the gas supply.
Alternative clamp positions
If the front and rear clamp positions are
problematic, alternative positions can be
used on the sides of the hob, dependant
on the particular installation.
These positions will require clearance from
any cabinet sides and may effect how
tightly the hob will meet the work top.
Stone (Granite or equivalent) work
tops
Depending on the type of work top being
used, there may or may not be any back-
ing material to screw the clamp screws
into.
1. If the work top is a composite type
(backed with MDF or similar) there may
be enough backing to screw directly into.
This will depend on the work top thickness
and backing thickness and will have to be
assessed at the installation. In this case,
install the hob as for a standard work top.
2.Ifthereisinsufcientbackingmate-
rial to screw into, or if the work top is
completely solid in construction, then it
will be necessary to glue a strip of wood,
MDF,breboardorsimilartotheunder-
side of the work top, along the front and
rear edges of the cutout. Use a strong,
proprietary adhesive to bond these strips
and allow to cure before attempting to
clamp the hob into position.

INSTALLATION
13.302
Connect gas hob to gas supply
The inlet is at the rear right hand side of
the hob.
The hob may be connected to the gas
supplyeitherbyrigidpipeworkorexible
connection.
Flexible connections
Usea900mm-1125mmlengthofex-
ible connector. Ensure that the hose is
installed hanging freely downwards, is not
trapped, is not subjected to undue forces
and is not supported at the bottom by a
horizontal surface.
Natural Gas - Flexible connections should
comply with BS669, latest edition.
LPGas-Forexibleconnectionsusea
bayonet type hose, suitable for use on LP
gas up to 50 mbar pressure rise and 70°C
temperaturerise.Theexiblehoseshould
be coloured black with a red stripe, band
or label. If in doubt, contact your supplier.
Theinstallationmustensurethattheex-
ible tube cannot come into contact with
movable parts of the housing unit (e.g. a
drawer) and does not pass through any
space susceptible to becoming congested.
Make sure the appliance is gas sound
& all components are operating cor-
rectly.
Connect to the electricity supply
Unless this appliance is supplied with a
ttedplug,itmustbeconnectedbya
competentperson,usingxedwiringvia
a double pole switched fused spur outlet,
with a contact separation of 3mm at all
poles.
Connect the mains lead wires to the termi-
nals:
The blue wire must be connected to the
terminal marked N (Neutral) LOAD or
coloured black. The brown wire must be
connected to the terminal marked L (Live)
LOAD or coloured red.
The green/yellow coloured wire must
be connected to the terminal marked E
(Earth) or coloured green.
Warning: this appliance must be
earthed.
The fused spur must be accessible after
installation.
If the supply cord is damaged, obtain
a special cord from the Customer Care
Helpline,whichmustbettedbyaquali-
edperson.

INSTALLATION
13.302
Connect to the electricity supply
For hobs that are supplied/manufactured
with a 13Amp supply cord and plug only.
Warning:Ensurethatthepowerratingof
the appliance is compatible with a 13Amp
supply before connecting to the electricity
supply, i.e. 2.8kW.
Warning: This appliance must be
earthed.
Theexiblemainsleadissuppliedcon-
nected to a BS 1363 fused plug, the plug
isttedwiththecorrectfuse.
Replace only with a fuse of the same rat-
ing and type.
The wires in the mains lead are coloured
inaccordancewiththefollowingcode:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
As the colours of the wires in the mains
lead for the appliance may not correspond
with the coloured markings identifying the
terminalsinyourplug,proceedasfollows:
1. The wire which is coloured green and
yellow must be connected to the terminal
marked E (Earth) or coloured Green.
2. The wire which is coloured blue must
be connected to the terminal marked N
(Neutral), or coloured Black.
3. The wire which is coloured brown must
be connected to the terminal marked L
(Live), or coloured Red.
The plug and socket must be accessible
after installation. Should the mains lead
of the appliance ever require replacing,
we recommend that this is carried out by
aqualiedelectricianwhowillreplaceit
with a lead of the same size and tempera-
ture rating.
Important:-ensurethatyourouteall
mainsandelectricalcablesandexible
tubing well clear of any adjacent heat
source.
Under no circumstances should the mains
electric cable be allowed to come into con-
tactwithhotovenuesorsimilarsurfaces
and keep well clear of any moving parts
that may be in the vicinity of the instal-
lation, such as cooling fans on adjacent
appliances.
Troubleshooting
Before you call Customer Care, please
checkthefollowingpoints:
Burner fails to ignite:
•Checktheelectricitysupplyison.
•Checkthefuse.
There is a spark to the burner but it
fails to ignite:
•Checkthattheameholesintheame
spreader are clear of water or deposits.
•Checkthatthegassupplyisturnedon.
Smell of gas:
•Checkthatnoneofthecontrolshave
inadvertently been turned on. If all the
controls are in the off position, turn off
the gas supply & call Customer Care.
The burner ame appears uneven:
•Checktheburneristtedcorrectly.
•Checktheameholesintheame
spreader are clear of water or deposits.

14.335
TECHNICAL DATA
This information is for the following
appliances:
Belling Hobs SCGHU60GC / SCGHU70GC
- NG only
Data badge
Underside of the hob base
Electrical supply
220 - 240V ~ 50Hz 1W
Ignition
Mains repetitive ignition.
Gas connection
The inlet connection is at the rear right-
hand side -
ISO7 - Rp1/2” (1/2” BSP)
Appliance Class
Class 3 Bulit-In Hotplate
Gas pressure settings
G20 Natural Gas @ 20 mbar
Countries of destination
GB - Great Britain, IE - Ireland
Burner Natural Gas
kW Injector
SCGHU60GC
Back LH 2.00 104
Front RH 2.00 104
Back RH 2.50 120
Front LH 1.00 77
SCGHU70GC
Back LH 2.00 104
Back RH 2.50 120
Wok 3.50 121 & 63
Front RH 2.00 104
Front LH 1.00 77
Total Heat Input
SCGHU60GC 7.50
SCGHU70GC 11.00