Beltroad G15 User manual

User Guide Book
G15 Pet Bell GPS Tracker
Hello, World !

Scan the either QR code to download tracking APP,
first is "GPS365" (Pro) , second is "365GPS" (Lite)
Tracking Web: www.365gps.net
Android APP: 365GPS(default) / GPS365
iOS APP: 365GPS(default) / GPS365
Login ID: IMEI number (15 digits sticker on the device)
Default password: the last 6 digits of imei

Main feature:
Network: GSM 850/900/1800/1900MHz, GPRS Class 12
High level waterproof case and durable anti-scratch
engineering ABS housing
Positioning modes: GPS + AGPS + Wifi(optional) + LBS
Tracking System: APP + Web + SMS command
Track + Historical Trace Playback + Geo-Fence
GPS location accuracy: within 10 meters outdoor(may be
affected by the environment)
Wifi location accuracy: within 50 meters(optional for some
models)
LBS location accuracy: above 100 meters
Working Temperature: -20℃～45℃/ Humidity: 5%～95%
Dimension and Weight:
G15 size: D=36.8*H=36.8mm
G15 weight: about 24g (without accessories)
Ultra small size and light weight for all pet dog/cat/birds..ect
1、Preparation work
1. Please prepare a nano SIM card which support both GSM
and GPRS network, turn off PIN code.
Note:
A: The tracker consumes about 30MB GPRS data per month.
B: GPRS data featured sim card is preferred
C: If your local 3G/4G sim card is compatible with GSM/GPRS

network, it can be used for our tracker as well
2. Download and install our free mobile APP in your phone.
2、Power on the GPS and make GPS online
Reference Photo as below:
Open the GPS tracker cover and Insert the SIM card
Power On: long press power key for 3seconds(red LED will
light up and blinking after 2 seconds)
Power off: long press for 9 seconds (red LED with light up then
off )
Attention:

After the GPS tracker power on for 2 minutes with red LED
blinking, you may meet the following conditions:
Condition A: if the red LED blinking slow, that means GPS is
online, please use APP GPS365/ PC web to track it directly.
Condition B: if the yellow LED blinking fast, please send SMS
command ""imei#" first, then check as following:
a: If the GPS tracker response your phone with correct 15 digits
imei #, then please send SMS command to set APN:
Attention: sim card from different telecom operators come
with different APN parameters, you can put the sim card in
your phone to get the correct APN parameter
APN settings: “APN#parameter#account#password#
If your gps sim card don’t have account and password,
then send “APN#parameter#” only.
b: If the tracker don’t response your phone with 15 digits imei
No., please power off the tracker and test sim card from other

telecom operators.
Close the top cover
Attention: Please close the top cover tightly to
keep waterproof
3、LED lights
Red LED blinking indication:
Slow blinking: GPS tracker GPRS data is getting through with
server, it’s online in APP/Web/Server
Fast blinking: Invalid SIM/ Without SIM/ GPS tracker offline
long brighting: Battery recharging
LED off: Power off/ LED was turned off in APP/ Sleeping mode
4、Login the GPS tracker in APP/Web
Scan the QR code or input the IMEI # to login the APP.
Login ID: IMEI number ( 15digits )

Password: the last 6 digits of imei
5、Main Functions:
5a、Track

A: GPS positioning: when the GPS tracker stay outdoor/good
GPS satellite signal environment,a accurate GPS location
B: Wifi positioning: when indoor device will capture the wifi
router MAC address and take the MAC address as location.
C: LBS positioning: when both GPS and wifi signal are not
available for the device, it will give you a general location
according to the nearest GSM signal tower around it.
GPS tracker location accuracy:
GPS: about 10 meters outdoor
Wifi: about 50-500 meters. Attention that wifi location visits
telecom carrier's database to get location , in some countries'
the carriers' database not open to the public, maybe wifi
location can't work, for example Germany.
LBS: above 100 meters. Depends on how many Base Station
Towers around the GPS tracker. Normally, if the tracker stay in

the city, the LBS location accuracy will be much more accurate
than that stay in the countryside.
Remind: you can turn off LBS/GPS location function to
save battery if it’s necessary.Also Power/on by Alarm setting
in this page to save battery.
5b、Playback and Geo-fence
5b1: Playback:
Please choose the start time and end time and other options in
the APP to check the historical trace of your GPS tracker and
show it on the map as below.
5b2: Geo-fence:
You can set a security range for your pet on the map in your
app, once your GPS tracker out of the preset safe range, you
will get alarm.
Please enable “Push Notification”and “Vibration alarm”in the

setting menu, if someone moved your GPS tracker, the tracker
will send vibration alarm push message to your phone timely.
6、Related SMS commands
6.1 Inquire IMEI No.: “imei# ”
6.2 Restore default password: “pwrst”
6.3 Restore to the factory settings: “1122”
6.4 Set Upload interval:
"time#minute"(minute range 1-120minute)；
“md#second”(second range 10-60seconds)
6.5 Turn on/off LED: “LED#on , LED#off”
6.6 APN settings: “APN#parameter#account#password#”
6.7 Remote Restart: “sysrst”
6.8 Vibration Alarm: “6666#on# / 6666#off#”
6.9 Heartbeat Packet Time: heartbeat#No.#(no.=second)
6.10 Turn off GPRS data and location function: link#0#
6.11 Turn on GPRS data and location function: link#1#
6.12 Control Auto Power On/Off:
"pwonoff#day,hour,minute#day,hour,minute"
(for example: pwonoff#0,0,10#0,2,0 -- mean: the GPS tracker
will work for 10 minutes then power off and after 2 hours later it
will power on automatically again.)