BenQ DC E43 User manual

Welcome
DC E43 Digital Camera
User’s Manual

Copyright
Copyright 2004 by BENQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chem-
ical, manual or otherwise, without the prior written permission of this company.
Disclaimer
BENQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness
for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication
and to make changes from time to time in the contents hereof without obligation of this company
to notify any person of such revision or changes.
*Windows, Internet Explorer and Outlook Express are trademarks of Microsoft Corporation. Oth-
ers are copyrights of their respective companies or organizations.
Taking care of your camera
• Do not use your camera in the following environmental range: temperature below 0°C or above
40°C.
• Do not use or store your camera in the environments listed below:
– Direct sunlight
– High and dusty places
– Next to an air conditioner, electric heater or other heat sources
– In a closed car that is under direct sunlight
– Unstable locations
• If your camera becomes wet, wipe it with a dry cloth as soon as possible.
• Salt or seawater may cause severe camera damage.
• Do not use organic solvents such as alcohol, etc., to clean your camera.
• If the lens or viewfinder is dirty, use a lens brush or soft cloth to clean the lens. Do not touch the
lens with your fingers.
• To prevent electric shock, do not attempt to disassemble or repair your camera by yourself.
• Water may cause a fire or electric shock. Therefore, store your camera in a dry place.
• Do not use your camera outdoors when it is raining or snowing.
• Do not use your camera in or near water.
• If a foreign substance or water gets in your camera, please turn the power off immediately and dis-
connect the batteries and the power adapter. Remove the foreign substance or water, and send it
to the maintenance center.
• Transfer the data to the computer as soon as possible to avoid losing your images or video clips.

BenQ DC 5530 User’s Manual
English
I
1. Touring your DC E43 ..................................................... 1
1.1 Checking the Package Contents ....................................1
1.2 DC E43 Components .................................................1
1.2.1 Front View ......................................................1
1.2.2 Rear View .......................................................2
1.2.3 Status LED Indicator..........................................2
2. Preparing Your DC E43 for Use ...................................... 3
2.1 Inserting the Battery ...................................................3
2.2 Charging the Battery ...................................................3
2.3 Loading an SD Card....................................................4
2.4 Turning the Power On/Off ..........................................4
3. Using the DC E43 ........................................................... 5
3.1 LCD Monitor Icons ....................................................5
3.1.1 Photography Mode............................................5
3.1.2 Video Mode ....................................................5
3.1.3 Video Playback Mode.........................................6
3.1.4 Still Image Playback Mode ..................................6
3.1.5 LCD Monitor Display ........................................6
3.1.6 Setting the Operation Mode .................................6
3.2 Capturing Pictures......................................................7
3.2.1 Changing Camera Settings...................................7
3.3 Recording Movies.....................................................10
3.4 Deleting Files ...........................................................10
3.4.1 Erasing in Photography Mode (Quick Erase) ..........10
3.4.2 Erasing in Playback Mode..................................10
3.5 Using Playback Mode................................................11
3.5.1 Reviewing Still Images ......................................11
3.5.2 Playing Back Video Clips...................................11

BenQ DC 5530 User’s Manual
English
II
3.5.3 Attaching Voice Memos....................................11
3.5.4 Viewing a Thumbnail Display.............................12
3.5.5 Zoom Playback...............................................12
3.5.6 Slideshow Display ...........................................12
3.5.7 Protecting Images ...........................................13
3.5.8 Setting DPOF.................................................14
3.6 Setup Menus............................................................15
3.6.1 Picture Menu.................................................15
3.6.2 Function Menu..............................................17
3.6.3 Playback Menu...............................................19
3.6.4 Setup Menu...................................................19
4. PC Dependent Features ................................................ 22
4.1 Installing the Digital Camera Software.........................22
4.2 Transferring Files with your PC ..................................22
4.3 Viewing Images on TV ..............................................23
5. Service Information ...................................................... 24

BenQ DC 5530 User’s Manual
English
Touring your DC E43 1
1TOURING YOUR DC E43
1.1 Checking the Package Contents
The package includes the following items:
If any of the items are missing or appear to be damaged, contact your dealer. Save the
packaging in the event you need to ship your camera for service.
1.2 DC E43 Components
1.2.1 Front View
User Manual
1
2
3
4
6
5
7
8
9
10
11
B
1. User's manual
2. DC E43 digital cam-
era
3. USB cable
4. SD card
5. Battery
6. Hand strap
7. DC E43 software
CD-ROM
8. Camera pouch
9. AV cable
10. Conversion adapter
11. AC adapter
1. Shutter button
2. Power button
3. Built-in flash
4. Optical viewfinder
5. Self-timer LED
6. Speaker
7. Lens/Lens cover
8. Conversion adapter terminal
9. Tripod socket
10. Microphone
1 2 4 5
7
8
9
6
10
3

BenQ DC 5530 User’s Manual
English
Touring your DC E43
2
1.2.2 Rear View
1.2.3 Status LED Indicator
Color State During Power Off During Photography Connected to a PC
Green
On The completion of bat-
tery charge
AE or AF is locked with the
shutter button held halfway
down
—
Flashing Battery charging in
progress
——
Red
On Battery charging error Writing to SD card in
progress
Connected to a PC
(SD card is inserted)
Flashing — Image not in focus —
Orange
On — Flash is charging —
Flashing — Hardware malfunction SD card is not
inserted
1 2 3 4 5
6
7
8
9
10
11
16
121314
15
1. Optical Viewfinder
2. Status LED
3. Mode switch
– Playback
– Movie
– Stillpicture
4. Power button
5. Shutter button
6. Zoom out/Zoom in buttons
7. Menu button
8. Erase button
9. Focus/Up navigation button
10. Flash/Right navigation button
11. Battery compartment
12. SET button
13. Self-timer/Down navigation
button
14. EV compensation/Back-
light/Left navigation button
15. Display button
16. LCD panel

BenQ DC 5530 User’s Manual
English
Preparing Your DC E43 for Use 3
2PREPARING YOUR DC E43 FOR USE
2.1 Inserting the Battery
1. Turn the camera off.
2. Slide open the battery/SD card cover on
the side of the camera.
3. Insert the battery in the direction of the
arrow with the correct polarity into the
battery compartment.
4. Close the battery/SD card cover.
To remove the battery, open the battery
compartment and press the orange battery
release switch. The battery pops out.
2.2 Charging the Battery
A brand new battery or one that has not been used for an extended period of time might
affect the number of pictures that can be taken. Therefore, to maximize its performance and
lifetime, we recommend that you fully charge the battery and discharge it for at least one
complete cycle before use. Using the optional AC power adapter charges the battery. Make
sure that the camera’s power is off and then insert the battery before starting.
1. Insert the conversion adapter into the conversion adapter
terminal of the camera as shown in the illustration.
2. Insert one end of the AC power adapter into the DC IN
terminal of the conversion adapter.
3. Insert the other end of the AC adapter into a wall outlet.
4. The viewfinder LED flashes green when charging starts
and lights green when fully charged. It lights red when a
charging error occurs.
It is recommended to fully discharge the battery before being
charged. Charging time varies according to the ambient
temperature and the battery status. If you want to use the camera when the battery charging
is in progress, use the camera with the AC power adapter connected.
Notes
• Use only the specified battery type.
• If you are not going to use the battery for an extended period of time, remove it
from the camera to prevent leakage or corrosion.
• Avoid using the battery in extremely cold environments as low temperatures can
shorten the battery life and reduce camera performance.
Battery
release

BenQ DC 5530 User’s Manual
English
Preparing Your DC E43 for Use
4
2.3 Loading an SD Card
All images and video clips taken by the camera can be stored in an SD (Secure Digital) card.
1. Make sure the camera is off and then open the
battery/SD card cover.
2. Insert an SD card:
If you cannot insert the card, check the
orientation.
3. Close the battery/SD card cover.
To remove the SD card, make sure the camera is off.
Open the battery/SD card cover. Press lightly on the
edge of the memory card and it will eject. Format
your SD card before use. Refer to 3.6.4.2 “Format”
on page 20.
2.4 Turning the Power On/Off
Insert the battery and an SD card before starting.
• Turning the power on
Press the POWER button for two seconds to turn the power on.
The viewfinder LED lights green and the camera is initialized.
• Turning the power off
Press the POWER button to turn the power off.
The power turns off automatically when the camera has not been operated for a fixed
period of time. To resume operation, press the power button again. Refer to 3.6.4.5 “Auto
off” on page 20 for further details. After the power is turned on, it may take several
seconds to charge the flash.

BenQ DC 5530 User’s Manual
English
Using the DC E43 5
3USING THE DC E43
3.1 LCD Monitor Icons
This section describes the icons on the LCD monitor in each operating mode.
3.1.1 Photography Mode
3.1.2 Video Mode
1. Movie mode
2. Zoom status
3. Remaining battery status
4. Image size
5. Possible recording time / elapsed time
6. Quality
7. Recording indicator
8. Self-timer
9. Focus
1. Zoom status
2. Voice memo
3. Remaining battery status
Full/ Medium/ Low/
Empty
4. Flash
5. Histogram
6. Focus area
(appears when the shutter button is
pressed halfway.)
7. Capture mode
8. Image size
9. Possible number of shots
10. Quality
11. Date and time
12. Self-timer
13. Unsteady hold warning
14. Exposure compensation
Backlight correction
15. Metering
16. White balance
17. Focus
18. Still image mode

BenQ DC 5530 User’s Manual
English
Using the DC E43
6
3.1.3 Video Playback Mode
1. Video status bar
2. Elapsed time
3. File number
4. Folder number
5. Protect
6. Mode
7. Play mode
8. Sound off (When the button is pressed
during video playback.)
9. Total time
3.1.4 Still Image Playback Mode
1. Mode
2. File number
3. Folder number
4. Protect
5. Voice memo
3.1.5 LCD Monitor Display
Press the LCD button to select the display format. In Still Image or Movie mode, preview
image with full OSD information is displayed. Press it repeatedly to switch between full
OSD, OSD with histogram display, basic display with no OSD information or LCD switched
off. In movie mode, the LCD status cannot be changed.
3.1.6 Setting the Operation Mode
Use the mode switch to set the camera to take still images or movies, or review pictures or
movies.

BenQ DC 5530 User’s Manual
English
Using the DC E43 7
3.2 Capturing Pictures
Follow these steps to take pictures:
1. Frame the shot in the viewfinder.
2. Press the shutter button down halfway to focus and
adjust the exposure.
3. Hold the camera still and press the shutter button.
The focus area frame turns blue and the viewfinder LED
lights green when the camera is in focus and the exposure is
calculated. If the focus or exposure is not suitable, the frame
of the focus area turns yellow and the viewfinder LED flashes red.
If the photographic preview is set to “ON” (see 3.6.2.5 “Preview” on page 18), a preview of
the captured image will be displayed while the image is being recorded onto the SD card.
3.2.1 Changing Camera Settings
Camera settings can be changed with the five-way
set direction button.
1. SET: Enters the menu page and confirms the
chosen setting.
2. Up/Focus: Scrolls upwards in menus and
enables you to choose the appropriate focus
setting.
3. Right/Flash: Scrolls right and enables you to
choose the appropriate flash setting.
4. Down/Self-timer: Scrolls downwards, toggles the self-timer on and off, and selects the
desired self-timer mode.
5. Left/Exposure Compensation / Backlight Correction: Scrolls left, toggles the exposure on
and off, and toggles the backlight correction on and off.
3.2.1.1 Changing the Focus
Photographs can be taken with the distance to the subject set by auto focus, macro, or
infinity. The settings will be maintained even when the power is turned off or when Auto
OFF is activated.
1. Slide the mode switch to or .
2. Toggle the / button to select the desired focus mode.
Each press of the button selects a macro or landscape mode and displays it on the screen.
12
3
4
5

BenQ DC 5530 User’s Manual
English
Using the DC E43
8
3.2.1.2 Changing the Flash
Use the flash for taking photographs when there is insufficient light. The flash firing mode
can be set to suit the photographic conditions.
1. Slide the mode switch to .
2. Toggle the button to select the desired flash mode.
Each press of the button selects a flash mode and displays it on the screen.
3.2.1.3 Changing the Exposure Value/Backlight Correction
Photographs can be taken with the overall screen intentionally made brighter or darker.
Exposure can be set in steps of 0.3 EV units and the setting range of the exposure
compensation is: -2.0 to +2.0. The larger the value, the brighter the image.
1. Slide the mode switch to and press the button to toggle between
Backlight Correction, and Exposure Compensation.
2. Increase or decrease the exposure value with the / buttons.
3.2.1.4 Setting the Self-Timer
This setting enables photographs to be taken with the self-timer (10 sec., 2 sec., 10+2 sec.)
1. Slide the mode switch to or .
2. Toggle the button to select the setting.
Each press of the button selects one of the self-timer options and displays it on the screen.
3. Compose the picture, press the shutter button down halfway, then press it down fully. The
self-timer LED flashes and the photograph is taken after the preset time has elapsed. The
countdown is displayed on the LCD monitor. To cancel the self-timer at any time, press
the SET button.
Icon Flash mode Description
Blank Auto The flash fires automatically to suit the photographic conditions.
Red-eye reduction Reduces the red-eye phenomenon when you want to take natural
looking photographs of people and animals in low-light conditions.
Forced flash The flash always fires.
Suppressed flash The flash does not fire.
Night scene Use this mode when taking pictures of people in the dark or at
night. When the Night Scene is selected, the flash mode is fixed to
Slow Synchronization. (the flash is fired at a slower shutter speed.)

BenQ DC 5530 User’s Manual
English
Using the DC E43 9
3.2.1.5 Using the Zoom
The camera features both digital and optical zoom.
•UsingtheOpticalZoom
Zoom photography enables you to take zoom photographs up to 3 times the size of wide-
angle photography depending on the distance up to the subject. You can also enlarge the
center of the screen and take photographs in the digital zoom mode.
1. Slide the mode switch to or and press to turn on the LCD monitor.
2. Compose the picture with the zoom button.
– Pressing the button zooms in on the subject and enlarges the subject on the LCD
monitor.
– Pressing the button provides a wider angle picture. The lens position moves
according to the zoom button setting.
3. Press the shutter button down halfway, then press it down fully.
• Using the Digital Zoom
Using a combination of 3 times optical zoom and
3.6 times digital zoom permits zoom photography
of up to 10.8 times to suit the subject and the
distance. Refer to 3.6.2.4 “Digital Zoom” on page 18
to enable the digital zoom. Once enabled, press repeatedly until the zoom slider moves
into the red portion of the zoom bar.
3.2.1.6 Recording Voice Memos
A voice memo can be recorded for up to 30 seconds in still image mode immediately after a
still image is captured or in playback mode while viewing the picture. To see how to enable
recording of voice memos, see 3.6.2.2 “Voice Memo” on page 18.
1. Slide the mode switch to .
2. Compose the picture and press the shutter button.
•VOICE RECORDING is displayed on the screen and the voice memo recording starts.
3. Press the shutter button one more time to stop recording at any time within the
30 second interval.
•VOICE RECORD END will be displayed and the recording will end. The icon is
displayed for those images that have been recorded with a voice memo.

BenQ DC 5530 User’s Manual
English
Using the DC E43
10
3.3 Recording Movies
This mode enables you to record video clips at a resolution of 320 x 240 pixels. Voice can
also be recorded along with the video.
1. Slide the mode switch to .
2. Compose the picture and adjust the zoom with the zoom button.
• Optical zoom and digital zoom can be set while composing.
3. Press the shutter button to start recording. Press the shutter button a second time to stop
the recording of the video clip.
3.4 Deleting Files
You can delete images and video clips using the quick delete function in record mode or the
menu in playback mode.
3.4.1 Erasing in Photography Mode (Quick Erase)
The Quick delete function enables you to erase the last image in still image or movie mode.
1. Slide the mode switch to or .
2. Press the button. The last image and quick delete menu appear on the screen.
3. Press the SET button to erase the image.
3.4.2 Erasing in Playback Mode
To erase a single image, selected images, or all images:
1. Slide the mode switch to . The last image is displayed on the screen.
2. Select the image you want to erase with the / buttons.
3. Press the button. The deletion menu will be displayed.
4. Select one of the following options with the / buttons and press the SET button.
•Single: Erases the selected image or the last image.
•All: Erases all of the images on the SD card except for the protected images.
•Select: Erases a number of selected images.
5. Press the SET button to delete the selected images.
If you chose the Select option, all the images are displayed in the thumbnail display. Select the
image you want to erase with the / / / buttons and press the button. The
icon will be displayed. Press the erase button a second time to cancel the operation. Repeat
this procedure and select all the images that you want to erase.
Notes
• In movie mode, the LCD monitor cannot be turned off.
• When recording a video clip, flash photography is not possible.

BenQ DC 5530 User’s Manual
English
Using the DC E43 11
3.5 Using Playback Mode
3.5.1 Reviewing Still Images
You can view still images on the LCD monitor in the playback mode.
1. Slide the mode switch to . The last image appears on the screen.
2. Press the / buttons to scroll forward or backward through the images.
3. Press the LCD button to switch through complete OSD information on the screen, no
OSD information, and image with histogram on the screen.
4. Pressing the / buttons during image playback will rotate the image by 90 degrees
counter clockwise/clockwise respectively.
3.5.2 Playing Back Video Clips
You can play back video clips and voice recorded on the camera.
1. Slide the mode switch to . The last image appears on the screen.
2. Press the / buttons to select the desired video clip indicated by the movie icon.
3. Press the SET button to start playing the video clip.
4. Press the / buttons during playback to rewind or fast forward the clip.
5. Press the button to stop playback and return to the start of the video clip.
6. Press the SET button to pause video playback. Press the SET button again to restart
playback.
3.5.3 Attaching Voice Memos
A maximum of 30 seconds of audio can be recorded along with still images. The voice memo
can be recorded only once.
1. Slide the mode switch to . The last image appears on the screen.
2. Select the image to which you want to attach the voice memo.
3. Press the shutter button. VOICE RECORDING is displayed on the screen and recording
starts.
4. Press the shutter button to stop recording at any time.
The icon is displayed for those images that have been recorded with a voice memo.
Playing Back Voice Memos
Press the SET button to display VOICE PLAYBACK and play back the voice memo. Voice
memo is only available in the still single image capture mode.
Notes
• The icon is displayed with the video data. Video clips cannot be rotated.
• The icon is displayed with images which have an audio memo recorded.
Press the SET button to playback the voice memo data.
• The information display status cannot be switched for video clips.

BenQ DC 5530 User’s Manual
English
Using the DC E43
12
3.5.4 Viewing a Thumbnail Display
This function enables you to view 9 thumbnail images
on the LCD monitor at the same time, which helps
you to quickly search for the image that you want.
1. Slide the mode switch to display the last
image on the screen.
2. Press the button to display the images in the
thumbnail display.
3. Press the / / / buttons to scroll
through the images. Selected images are indicated
by a green frame.
4. Press the SET button to display an image at regular size.
3.5.5 Zoom Playback
In playback mode, images can be enlarged with 2 x
and 4 x magnification. This mode allows you to
enlarge selected portions of the image to check for
small details.
1. Slide the mode switch to . The last image
appears on the screen.
2. Press the / buttons to select the image
you want to view, or select the required image
from the thumbnail display.
3. Press the button. The image is enlarged.
Two rectangular frames are displayed on the LCD monitor. The outer frame represents
the entire image, while the inner frame shows the location of the currently enlarged area.
4. Press the button to resume normal magnification.
3.5.6 Slideshow Display
The slideshow function enables you to display your
still images automatically in order one image at a
time.
1. Slide the mode switch to .
2. Press the MENU button.
3. Select Slide Show using the / buttons, and
press the SET button to start the slideshow.
4. To stop the slide show at any time, press the SET
button.
: Select Page
: Select Item
Adjust

BenQ DC 5530 User’s Manual
English
Using the DC E43 13
3.5.7 Protecting Images
You can protect images from being deleted accidentally as follows:
1. Slide the mode switch to . The last image will be displayed on the screen.
2. Select the image you want to protect with the / buttons.
3. Press the MENU button.
4. Select one of the following options with the /
buttons, and press the SET button.
•Single: Protects the selected image or the last
image.
•All: Protects all of the images on the SD card.
•Select: Protects the selected images.
5. If you selected Single or All, choose Set with the
/ buttons, and press the SET button. The
required images are protected.
6. If you selected Select, all the images are displayed
in the thumbnail display. Select the image you
want to protect using the / / /
buttons, and press the button.
The protect icon is displayed with protected
images. Selecting a protected image and pressing
the button again will cancel the protection. Repeat this procedure to select multiple
images for protection.
7. Press the SET button to protect the selected images.
Select Item
Select Page
Adjust
Select
Enter

BenQ DC 5530 User’s Manual
English
Using the DC E43
14
3.5.8 Setting DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing
information along with the digital images on the memory card. You can select the images to
be printed and how many prints to make with the DPOF menu. Insert the memory card in
the appropriate card compatible printer. When the printer starts printing, it reads the
embedded information on the memory card and print the specified images.
1. Slide the mode switch to .
2. Select the image that you want to set DPOF using the / buttons.
3. Press the MENU button.
4. Select DPOF with the / buttons, and press
the SET button.
5. Select Single or All with the / buttons, and
press the SET button.
•Single: Sets DPOF for each individual image.
•All: Sets DPOF for all images at once.
6. Select Print Num. with the / buttons, and
press the SET button.
7. Set the number of prints with the / buttons, and press the SET button. You can set
up to 9 prints for each image.
8. Select Date with the / buttons, and press the SET button.
9. Select date to ON or OFF with the / buttons, and press the SET button.
•ON: The date of the photograph will also be printed.
•OFF: The date of the photograph will not be printed.
10. Select Print Enable with the / buttons, and press the SET button.
11. Select Execute with the / buttons, and press the SET button.
This creates a file containing the DPOF information, and when the operation is finished,
the screen returns to the playback screen.
Select Page
Select Item
Adjust

BenQ DC 5530 User’s Manual
English
Using the DC E43 15
3.6 Setup Menus
This section covers the OSD menus which enables you to configure the camera settings.
3.6.1 Picture Menu
The picture menu in video and still picture mode enables you to change image properties.
1. Slide the mode switch to or .
2. Press the MENU button, and select Picture with the / buttons.
3. Select a menu item with the / buttons, and press the SET button to enter a
submenu or to change a setting.
4. Select the desired setting with the / buttons, and press the SET button.
To exit from the picture menu, press the MENU button.
3.6.1.1 Size
The size option sets the size of the image that will be photographed.
3.6.1.2 Quality
The quality option sets the quality (compression rate) at which the image is taken.
Still picture mode Video mode
Icon Size Description
2272 x 1704 2272 x 1704 pixels (4M)
1600 x 1200 1600x 1200 pixels (2M)
1280 x 960 1280 x 960 pixels (1M)
640 x 480 640 x 480 pixels (VGA)
Icon Quality Description
Fine High compression rate
Standard Normal
Economy Low compression rate
Adjust
Adjust
Adjust
Fine
Normal
Standard

BenQ DC 5530 User’s Manual
English
Using the DC E43
16
3.6.1.3 Sharpness
The sharpness option sets the sharpness of the image that will be photographed.
•Hard: Hard touch
•Normal: Normal touch
•Soft: Soft touch
3.6.1.4 Contrast
The contrast menu sets the difference between the bright and dark portions of the image that
will be photographed.
•Hard: Increases the contrast.
•Normal: Sets the contrast automatically.
•Soft: Decreases the contrast.
3.6.1.5 Color
This sets the color of the image that will be photographed.
•Standard: Standard color
•Vivid: Bright color
•Sepia: Sepia tones
•Monochrome: Black-and-white
3.6.1.6 White Balance
The white balance menu sets the white balance for photographing under a variety of lighting
conditions. This permits photographs to be taken that closely approach the conditions that
are seen by the human eye.
3.6.1.7 Manual White Balance
This menu manually sets the white balance and saves the setting. Use of this is convenient
when the white balance menu options do not offer a good match to the actual conditions.
Before selecting Execute, focus the camera on the subject (such as a white paper under bright
light) that will be used to set the white balance.
•Cancel: Disable manual white balance.
•Execute: Enable manual white balance.
Icon White Balance Description
Blank Auto Automatic adjustment
Incandescent Photography under incandescent lighting
Fluorescent 1 Photography under a white fluorescent tube with a bluish tint
Fluorescent 2
Photography under a white fluorescent tube with a reddish tint
Day Light Outdoor photography
Cloudy Photography under a cloudy sky
Manual Photography with a Manual WB
1
2