BenQ PX9510 User manual

PX9510 / PW9520 / PU9530
Digital Projector
User Manual
2015/ 4/ 7

Table of Contents
Important safety instructions .................................................................................................... 4
Overview ....................................................................................................................................... 7
Shipping contents ........................................................................................................................................ 7
Projector exterior view............................................................................................................................. 8
Front and upper side view.............................................................................................................. 8
Rear view............................................................................................................................................ 8
Left side view..................................................................................................................................... 8
Upper-right side view ...................................................................................................................... 9
Under view......................................................................................................................................... 9
Control panel and functions ........................................................................................................ 10
Remote control and functions..................................................................................................... 11
Remote control operation ........................................................................................................... 12
Setup and operations ................................................................................................................ 13
Setting the remote control batteries.................................................................................................... 13
Connecting to the projector .................................................................................................................. 13
Projection lens selection and Installation............................................................................................. 14
Installing or removing the optional lens.................................................................................... 14
Installing the new lens ................................................................................................................... 14
Using the Anti-theft Screw...................................................................................................................... 14
Removing the existing lens from the projector ................................................................................. 15
Choosing a location.................................................................................................................................. 16
Throw distance and screen size............................................................................................................. 17
Lens shift adjustable range ...................................................................................................................... 19
Preventing the unauthorized use of the projector ............................................................................ 20
Locking the projector.................................................................................................................... 20
Locking the control panel............................................................................................................. 21
Using the physical lock .................................................................................................................. 21
Making connections................................................................................................................... 22
Preparations .............................................................................................................................................. 22
Connecting DVI-D devices...................................................................................................................... 22
Connecting COMPONENT-video devices.......................................................................................... 23
Connecting a computer........................................................................................................................... 24
Connecting a external HDBaseT transmitter..................................................................................... 25
Connecting a monitor.............................................................................................................................. 26
Using the projector ................................................................................................................... 27
Preparations .............................................................................................................................................. 27
Turning the projector on or off ............................................................................................................. 28
Selecting an input source......................................................................................................................... 29
To select the video source ........................................................................................................... 29
Using the menus........................................................................................................................................ 30
Adjusting the projected image................................................................................................................ 31
Adjusting the image position........................................................................................................ 31
Fine-tuning the image size and clarity........................................................................................ 31
Adjusting the projection angle..................................................................................................... 32
Correcting picture distortion...................................................................................................... 32

Auto-adjusting the image.............................................................................................................. 32
Turning off the projector......................................................................................................................... 33
Using On-Screen Display......................................................................................................................... 34
Using the menus ............................................................................................................................. 34
Navigating the OSD ....................................................................................................................... 34
On-Screen Display (OSD) menus.......................................................................................................... 35
Menu Map......................................................................................................................................... 35
PICTURE .......................................................................................................................................... 38
Advanced.......................................................................................................................................... 39
SIGNAL............................................................................................................................................. 40
SETUP ............................................................................................................................................... 42
Advanced.......................................................................................................................................... 44
Installation........................................................................................................................................ 45
Network Settings ........................................................................................................................... 47
SERVICE............................................................................................................................................ 49
Additional information ............................................................................................................. 51
Care of the projector............................................................................................................................... 51
Care of the projector.................................................................................................................... 51
Cleaning the lens ....................................................................................................................................... 51
Cleaning the projector case.................................................................................................................... 51
Storing the projector................................................................................................................................ 51
Transporting the projector ..................................................................................................................... 52
Replacing the lamp .................................................................................................................................... 52
Removing the used lamp.......................................................................................................................... 53
Installing the optional color wheel........................................................................................................ 55
Cleaning the lters.................................................................................................................................... 56
Troubleshooting......................................................................................................................................... 58
Indicator messages ......................................................................................................................... 58
Common problems and solutions .............................................................................................. 59
Tips for troubleshooting............................................................................................................... 59
Image problems............................................................................................................................... 59
Lamp problems................................................................................................................................ 60
Remote control problems............................................................................................................ 60
Specications.............................................................................................................................................. 62
Dimensions ...................................................................................................................................... 63
Timing chart..................................................................................................................................... 64
PC timing.......................................................................................................................................... 64
3D supported timing ..................................................................................................................... 65
RS232 command control .............................................................................................................. 66
Control the projector through a Network......................................................................................... 69
Set up the projector for Network ............................................................................................. 69
Control the projector through a web browser....................................................................... 70
Projector status .............................................................................................................................. 70
Alert mail setup .............................................................................................................................. 71
Crestron control page................................................................................................................... 72
BenQ ecoFACTS ....................................................................................................................................... 74
Copyright.......................................................................................................................................... 74
Disclaimer ........................................................................................................................................ 74
Statement regarding hyperlinks and third-party websites..................................................... 74

English
4
Thank you for your purchase of this quality BenQ projector. For the best results, please read this
manual through carefully as it is your guide through the control menus and operation.
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that you follow
the instructions mentioned in this manual and marked on the product.
1. Please read this user manual before you
operate your projector. Keep this manual in
a safe place for future reference.
Read
Manual
2. Always place the projector on a level,
horizontal surface during operation.
- Do not place the projector on an unstable
cart, stand, or table as it may fall and be
damaged.
- Do not place inammables near the
projector.
- Do not use if tilted at an angle of more
than 10 degrees left to right, nor at angle
of more than 15 degrees front to back.
3. Do not store the projector on end vertically.
Doing so may cause the projector to fall
over, causing injury or resulting in damage.
4. Do not place the projector in any of the
following environments:
- space that is poorly ventilated or conned.
Allow at least 50 cm clearance from walls
and free ow of air around the projector.
- locations where temperatures may
become excessively high, such as the inside
of a car with all windows closed.
- locations where excessive humidity, dust,
or cigarette smoke may contaminate
optical components, shorten the
projector’s lifespan and darken the screen.
- locations near re alarms.
- locations with an ambient temperature
above 35°C/95°F.

English
5
- locations where altitude is higher than
1500 meters/4920 feet above sea level.
4920-
9840
feet
5. Do not block the vents holes while the
projector is on (even in standby mode):
- Do not cover the projector with any item.
- Do not place the projector on a blanket,
bedding or any other soft surface.
6. In areas where the mains power supply
voltage may uctuate by ±10 volts, it is
recommended that you connect your
projector through a power stabilizer, surge
protector or uninterruptible power supply
(UPS) as appropriate to your situation.
UPS
7. Do not step on the projector or place any
objects upon it.
8. Do not place liquids near or on the
projector. Liquids spilled into the projector
will void your warranty. If the projector
does become wet, disconnect it from the
power point and call BenQ to have the
projector repaired.
9. Do not look straight into the projector lens
during operation. It may harm your sight.
10. Do not operate the projector lamp beyond
the rated lamp life. Excessive operation of
lamps beyond the rated life could cause a
lamp to break on rare occasions.
!!
11. The lamp becomes extremely hot during
operation.Allow the projector to cool for
approximately 45 minutes prior to removing
the lamp assembly for replacement.
!!

English
6
12. This projector is capable of displaying
inverted images for ceiling mount
installation. Use only BenQ's Ceiling Mount
Kit for mounting.
13. Never attempt to replace the lamp assembly
until the projector has cooled down and is
unplugged from the power supply.
14. When you think service or repair is
required, take the projector only to a
suitably qualied technician.
15. Do not attempt to disassemble this
projector.There are dangerous high voltages
inside which may cause death if you should
come into contact with live parts.The only
user serviceable part is the lamp which
has its own removable cover. Under no
circumstances should you ever undo or
remove any other covers. Refer servicing
only to suitably qualied professional service
personnel.
Please keep the original packing for possible future shipment.

English
7
Overview
Shipping contents
Carefully unpack and verify that you have the items below. Some of the items may not be available
depending on your region of purchase. Please check with your place of purchase.
• Some of the accessories may vary from region to region.
• The warranty card is only supplied in some specic regions. Please consult your dealer for detailed information.
Projector without lens Remote Without AA
batteries Warranty card User manual CD
Quick start guide Power cable VGA cable Color-type Color Wheel
Anti-Theft screw Wired remote cable Lens Hole Cap

English
8
Projector exterior view
Front and upper side view
5 26
1
43
1. Control Panel
2. Air Inlet
3. Front IR sensor
4. Lens Change button
5. Lens (Remove lens hole cap before
use)
6. Foot for adjusting projector level
Rear view
10
11
9 8 7
7. Kensington Lock
8. Air Exhaust
9. Air Inlet
10. Air Filter
11. Rear IR sensor
Left side view
2320
15 16 1817 191412 13
25 2621 2422 27
12. Computer 2, RGBHV,
Y/Pb(CB)/Pr(Cr) input
13. Computer 1,VGA
14. LAN/HDBaseT
15. USB port for service
16. DVI-D Input
17. HDMI (HDCP)
18. Monitor Out, only for computer 1.
19. WIRED REMOTE
20. Air Filter
21. Components Y/Pb (Cb)/Pr(Cr) input
22. Video input
23. AC Power Cable Inlet
24. S-VIDEO input
25. AC Power Switch
26. Screen Trigger output
27. RS-232 control input

English
9
Upper-right side view
28
28. Handle
Under view
30
29
109
84
29. Ceiling support holes (Mounting
Screw: M4*12mm)
30. Air Filter

English
10
Control panel and functions
Name Function
FOCUS+ Focus the projected image
FOCUS-
ZOOM+ Increase/decrease projected image size
ZOOM-
UP BUTTON
Control Lens shift to move image left, right,
up, or down
RIGHT BUTTON
DOWN BUTTON
LEFT BUTTON
MENU Open / Close the OSD
UP/ DOWN/ LEFT/
RIGHT BUTTONS Navigate and change settings in the OSD
ENTER Select or change settings in the OSD
CANCEL Exit the On-Screen Display (OSD)
POWER
Turn the projector on or off (main power
switch must be turned on rst). Press to place
the projector in standby mode
SOURCE Select the input source
AUTO Auto Sync to optimize image size, position,
and resolution
POWER (LED) Green / Red / Orange / Flashing
See “Indicator messages” on page 58
WARNING (LED) Green / Red / Orange / Flashing
See “Indicator messages” on page 58
LAMP 1 (LED)
Green / Flashing,
See “Indicator messages” on page 58
LAMP 2 (LED)