BenQ Education TTY22 User manual

TTY 22 ASSEMBLY INSTRUCTIONS
• Please follow these instructions carefully
during assembly.
• Fits 55 to 86 inch interactive boards
e Capacity: 100 k g /22 0 lb

• Contents
   
 
•Assembly accessories:






/
�
q


@


 

 
 





(�j g


 
\ 
4)
P hilips screwdriver (not provided)

1
 

Step 1 :
E ngage locking mechanisms. Place spring washer (h) then washer (g) o v er
the threads then screw the 4 wheels into the left and right columns (Figure 1).
   / 

O  f  x 
p  y 
 m  m 
I
I
� 

Figure 1
 
  y (I) 


Figure 2
\
2

3
Step 3: Place the tray between the left and right columns with the connection
frame installed, align the screws, and use the Allen key (J) to lock the 4
screws (B) (as shown in the figure 3)

 \ /
Step 4: Lay the board flat, select the screws compatible with the board ' s
VESA mounts, and connect the VESA bars to the board (see figure4).


Step 5: Hang the b o ard with the VESA bars on the frame, ensure the
hooks are securely slotted into the connection frame, clamp the
safety bracket to the connection frame, then use 2 screws (C) to
secure it the bracket in place.(Figure 5).
Figure 5
Step 6: All done! Here is what your BenQ TTY22 should
look like after assembly.
4