BENSON HEATING EVRD Series Quick start guide

WARNINGS
Installation of Benson Equipment must be carried out in accordance with the current IEE
wiring regulations (BS 7671), BS 6896 (Industrial & Commercial) and any other relevant
British Standards and Codes of Practice by a qualified installer. All external wiring MUST
comply with the current IEE wiring regulations.
WIRING DIAGRAM MANUAL FOR
BENSON EVRD EXTERNAL HEATER

TT
Wiring Diagram 33-67-112 EVRD 12-60 Auto ignition On/Off
WARNING NEUTRAL RESET

Wiring Diagram 33-67-113 EVRD 72-145 Auto ignition On/Off
TT
WARNING NEUTRAL RESET

Wiring Diagram 33-67-713 EVRD 12-60 Auto ignition Hi/Low
TT
WARNING NEUTRAL RESET

Wiring Diagram 33-67-715 EVRD 72-145 Auto ignition Hi/Low
TT
WARNING NEUTRAL RESET

Wiring Diagram 33-67-714 EVRD 12-60 Auto ignition Modulation
TT
WARNING NEUTRAL RESET

Wiring Diagram 33-67-716 EVRD 72-145 Auto ignition Modulation
TT
WARNING NEUTRAL RESET

Benson Heating Ludlow Road Knighton
Powys LD7 1LP United Kingdom.
Telephone [phone]
Facsimile 01547 520399
Email [email protected]
Website www.bensonheating.co.uk
Benson Heating Ltd is a registered trademark of AmbiRad Limited. Because of continuous product
innovation, Benson Heating reserve the right to change product specification without due notice.