Bentone BFG 1 H3 Technical specifications

Providing sustainable energy solutions worldwide
178 239 35-1 P93783 2023-01-11
Installation- and maintenance instruction
BFG 1 H3
LME11.230C2E
MBC 120
Translation of the original instructions.

2Bentone
example Beispielexempel
352011030141
Designation
Type
Model
Serial no.
Motor supply
Main supply
MADE IN SWEDEN BY
LIGHT OIL 35-90kW 1,25-6,0 cSt 7-14bar
BF 1 KS 76-24
BF 1
BF 1 KS 76-24
1234567
1~230V 1,0A 50Hz IP 20
Man.Year 2019
Cap. Min-Max
3
?
1
-sv
1. Manualer på övriga språk
2. www.bentone.com\
nedladdning eller scanna
QR-koden.
3. Skriv in brännarens
artikelnummer som  nns på
din typskylt (se bild) och välj
ditt språk.
Detaljerad ecodesign
information kan laddas ner
på: www.bentone.com/
ecodesign.
-en
1. Manuals in other languages
2. www.bentone.com\download
or scan QR-code.
3. Enter the burner`s article
number on your data plate (see
picture) and select language.
Detailed ecodesign information
can be downloaded at:
www.bentone.com/ecodesign.
-da
1. Manualer på andre sprog
2. www.bentone.com\
download eller scan
QR-koden.
3. Indtast brænderens
artikelnummer, der  ndes
på typeskiltet (se billede), og
vælg dit sprog.
Detaljerede oplysninger om
ecodesign kan downloades
på: www.bentone.com/
ecodesign.
-fr
1. Manuels dans d’autres
langues
2. www.bentone.com\
download ou scannez le code
QR.
3. Saisir le numéro d’article
du brûleur sur votre plaque
signalétique (consultez
l’illustration) et sélectionnez
la langue.
Des informations détaillées
sur l’écodesign peuvent être
téléchargées à l’adresse:
www.bentone.com/
ecodesign.
-de
1. Gebrauchsanweisungen in
anderen Sprachen
2. www.bentone.com\download
oder scannen Sie den QR-Code.
3. Geben Sie die Artikelnummer
des Brenners auf Ihrem
Typenschild ein, (siehe Bild)
und wählen Sie die Sprache
aus.
Detaillierte Informationen zum
Ecodesign können unter
www.bentone.com/ecodesign
heruntergeladen werden.
2

3Bentone
Table of contents
1. General Information............................................................4
1.1 Delivery inspection........................................................................ 4
1.2 Safety ............................................................................................... 4
1.3 What to do if you smell gas......................................................... 5
2. Technical data.......................................................................6
2.1 Dimensions BFG 1 H3 .................................................................. 6
2.2 Capacity range............................................................................... 7
2.3 Gas categories, approved gases................................................ 7
2.4 Technicalspecication ................................................................. 7
2.5 Model BFG 1 H3 ............................................................................ 8
2.6 Components................................................................................... 9
2.7 Skeleton diagram........................................................................ 11
3. Installation..........................................................................12
3.1 General instructions................................................................... 12
3.2 Instructions .................................................................................. 12
3.3 Inspection and maintenance.................................................... 12
3.4 Preparation for assembly ......................................................... 12
3.5 Gas supply .................................................................................... 12
3.6 Electric connection ..................................................................... 12
4. Electric equipment.............................................................13
4.1 Safety system .............................................................................. 13
4.2 Wiring diagram............................................................................ 13
4.3 Function LME... ............................................................................ 14
4.4 Control program at faults; fault mode indicator LME .... .... 15
5. Mounting ............................................................................17
5.1 Hole pattern................................................................................. 17
5.2 Burner installation ...................................................................... 17
5.3 Gas connections.......................................................................... 17
5.4 Electric connection ..................................................................... 17
5.5 Gas quality.................................................................................... 18
5.6 De-aerating................................................................................... 18
5.7 Tightness control ........................................................................ 18
5.8 Calculationofgasow.............................................................. 19
6. Settings ...............................................................................20
6.1 Brake plate adjustment ............................................................. 20
6.2 Air adjustment ............................................................................. 20
6.3 Startup........................................................................................... 22
6.4 Control of combustion .............................................................. 22
6.5 Settingtheairpressureswitch ................................................ 23
6.6 Settingthegaspressureswitch,min...................................... 24
7. Gas valve MultiBloc MBC-120-DLE-S20 ............................25
7.1 Components................................................................................. 25
7.2 Setting of gas valve..................................................................... 26
8. Service .................................................................................28
8.1 Burner Service Schedule, Gas .................................................. 28
8.2 Component replacement intervals.......................................... 28
8.3 Combustion device ..................................................................... 29
8.4 Fan motor replacement............................................................. 30
8.5 Air intake and suction cone ...................................................... 31
8.6 Fanwheel...................................................................................... 32
8.7 Electrical package ....................................................................... 33
8.8 Controlofamemonitoringandionizationcurrent ........... 35
9. Handing over of the installation ......................................37
10. Troubleshooting.................................................................38
11. Service- and inspection protocol .....................................40

4Bentone
172 515 01-2 2021-10-05
1. General Information
The burner may only be used for its intended purpose in accordance with the
product’s technical data.
We reserve the right to make design changes and cannot be held liable for any
misprints or typographical errors.
Modifying the design or using accessories or components that have not been
approved by Enertech in writing is strictly prohibited.
This Installation and Maintenance manual:
• is to be regarded as part of the burner and must always be kept near
the installation site.
• must be read prior to installation.
• is intended for use by authorised personnel.
1.1 Delivery inspection
• Make sure everything is delivered and the goods have not been
damaged during transit. Transport damage should be reported to the
shipping company.
• If something is wrong with a delivery, report it to the supplier.
1.2 Safety
- before installation:
• Installation and work on the burner and associated system
components may only be carried out by persons who have undergone
relevant training.
• The product is packaged to prevent damage from occurring when
handled – Handle the product with care! Lifting equipment must be
used to lift larger packages.
• The products must be transported/stored on a level surface in a dry
environment, max. 80% relative humidity, no condensation.
Temperature -20 to +60 °C.
- installation:
• The burner must be installed in accordance with local regulations for
 re safety, electrical safety, and fuel distribution.
• The premises must comply with local regulations pertaining to use of
the burner and must have adequate air supply.
• The installation site must be free of chemicals.
• Fire extinguisher with Class BE recommended.
• Make sure when installing the burner that there is enough space to
service the burner.
• The electrical installation must be professionally carried out in
accordance with current mains electricity regulations and in a
professional manner.
• Make sure that the burner is suitable for the application (see Technical
Data).
• All components must be installed without being bent, twisted or
subjected to mechanical or thermal forces that affect components.

5Bentone
• Care must be taken by the installer to ensure that no electrical cables
or fuel lines are pinched or otherwise damaged during installation or
service.
• Sharp edges can occur on, for example:  ame tube, fan wheel and air
damper.
• The gas outlet from the pressure regulator must be con gured in
accordance with applicable regulations and lead to a safe area.
- before  rst start:
• The burner must not be put into operation without proper safety and
protection devices.
• Permitted ambient temperature during operation -10 to +60 °C. Max.
80% relative humidity, no condensation.
• The surface temperature of the burner’s components may exceed
60 °C.
• Handle with caution – the burner has moving parts, and there is risk
of crushing injuries.
• Seal inspections must be performed during installation and servicing
to prevent leakage.
• Fitting and installation work has been completed and approved.
• Electrical installation has been correctly performed.
• Flue gas ducts and combustion air ducts are not blocked.
• All actuators and control and safety devices are in working order and
correctly set.
• If the boiler is equipped with an access hatch, this must be equipped
with a hatch opening switch connected to the burner’s safety system.
• When in operation, the burner’s noise level can exceed 85 dBA – use
hearing protection!
- Operation:
• Carry out all stipulated settings, service and inspection work within
the set time.
1.3 What to do if you smell gas
• Turn off the fuel supply.
• Turn off the device and remove the boiler from operation.
• Open windows and doors.
• Prevent open  ames or sparking, e.g. do not turn lights on or off, do
not use any electrical appliances or mobile phones.
• Evacuate the building.
• Notify the installer or gas supplier of the problem so that it can be
recti ed.

6Bentone BFG 1
135
286 195
186
35
195
B
A
2. Technical data
The burner is intended for:
• Operation in installations according to EN 303 and EN 676.
Fuels:
• Natural gas H, E, L, LL.
• LPG, Butane and Propane.
2.1 Dimensions BFG 1 H3
The above-mentioned measurements are maximum measurements.
They can vary, depending on which components are used.
2.1.1 Dimensions anges
Flange
172 535 61 2023-01-11
145
109,5
10
23,5

7Bentone BFG 1
2.3 Gas categories, approved gases
Only dry gas is permitted for use.
2.2 Capacity range
Capacity Gas quantity at
min. power Nm3/h
Gas quantity at
max. power Nm3/h
BFG 1 H3 25-100kW
G 20 2.6 10.6
G 25 3.1 12.3
G 30 0.8 3.1
G 31 1.0 4.1
Gas valve
MultiBloc
Max. connection
pressure mbar
Min connection
pressure mbar
MBC 120 360 See data plate
Category Country of destination Supply pressure
II2R3R AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HR,
HU, IE, IS, IT, LT, LU, LV, MK, MT, NL, NO, PL, PT, RO, RS, SE,
SI, SK, TR
20 mbar
II2H3B/P AT, CH, CY, DK, FI, LT, RO, SE, SK 20 mbar
II2H3P GB, IE 20 mbar
II2L3B/P NL, RO 20 mbar
II2E3B/P PL 20 mbar
I2E(R)B BE 20 mbar
I3P BE 20 mbar
160302-302-4
Measurements according to EN 15036-1:2006
Alt.1 The noise level of the burner can be reduced by equipping the burner
with silencer. Installation must be done so it does not prevent air supply
to the burner.
Alt.2 The burner’s noise level can be reduced by connecting the burner’s air
intake to the air duct that opens into an appropriate location. Installation
must be done so it does not prevent air supply to the burner.
2.4 Technical specication
BFG 1
Main supply 1) 230V, 1~, 1.1/1.5A, 50/60Hz, IP20
Max fuse rating 6.3A
NOX-class 2 G25, G30 / 3 G20, G31
Noise level 75dBA
1) Max operating current, see data plate.

8Bentone BFG 1
29,0-31,0
16,0-71,0
ø103
2,5-3,5
7,5-8,5
Natural gas LPG
2.5 Model BFG 1 H3
-0,5
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
20 30 40 50 60 70 80 90 100
mbar
kW
25-100 kW
160303-247
0
2
4
6
8
10
12
14
16
18
20
22
24
25 35 45 55 65 75 85 95
160303-248
kW
Air settings
Nozzle assembly
Scale
Burner output
2.5.1 Burner output/Basic settings
Flame tube
length mm
Flame tube
Dimension A mm
Flame tube
Dimension B ø
145 121,5 103
245 221,5 103
The above-mentioned measurements are maximum measurements.
They can vary, depending on which components are used.
!Do not exceed working
eld.
!Scale value valid at
0 mbar in furnace
pressure.

9Bentone BFG 1
4
3
5
1
6
2
2.6 Components
1. Flame tube
2. Gas pressure switch
3. Connection gas valve
4. Ignition transformer
5. Motor
6. Capacitor

10 Bentone BFG 1
18
20
19
17
21
10
16
9
15
14
13
7
8
22
11
12
7. Gas valve (MultiBloc)
8. Air pressure switch
9. Test point for the air pressure switch on the low-
pressure side
10. Air intake
11. Air regulation
12. Electric connection
13. Gas burner control
14. Reset button
15. Nozzle assembly adjustment
16. Screw for division of burner in front and rear part
17. Nozzle assembly
18. Brake plate
19. Ignition electrode
20. Ionisation electrode
21. Nozzle
22. Air ow indicator (indicates the air setting)

11Bentone
172 515 79 2023-01-09
2.7 Skeleton diagram
1. Ball valve
2. Filter
3. Pressure regulator
4. Outlet for gas pressure measuring
5a. Gas pressure switch, min.
5b. Gas pressure switch, max.
6a. Main valve
6b. Safety valve
7. 1) Leakage control
9. Air pressure switch
10. Gas burner control
Pos. 5b: Components not required acc. to EN 676.
1) Required above 1200 kW acc. to EN 676.
Gas valve (MultiBloc)

12 Bentone
172 535 09-2
3. Installation
3.1 General instructions
Installation must be carried out in accordance with current regulations and
instructions.
The supplier/installer of the facility is obliged to familiarize himself with
all regulations so that the installation meets the requirements of the local
authorities.
Installation, assembly and settings must be performed to obtain the best
possible function. Only gas intended for the gas burner may be used.
3.2 Instructions
It is the installer’s responsibility to instruct the user in detail in the functions of
the gas burner and the entire system.
3.3 Inspection and maintenance
The system must be maintained at the interval specied in the service
schedule. If the burner is in a dirty environment, service should be done at
more frequent intervals.
3.4 Preparation for assembly
Check that the burner’s dimensions and capacity range match the current
boiler. The power information on the type plate refers to the burner model’s
min. and max. effect.
3.5 Gas supply
In order to obtain good operational safety, it is important that the installation
of the gas distribution system is carried out correctly, considering the
following:
• Check that the burner is approved for the gas quality of the
installation.
• Check that the burner gas components are approved for the specied
gas pressure, see type plate.
• Installation must be carried out in accordance with current standards.
• Pipe lines should be assembled so that service can easily be
performed on the boiler and burner.
• Pipe lines should be assembled so that any contaminants do not come
into contact with the gas components.
3.6 Electric connection
• Before work on the electrical connection, the current must be
disconnected so that the installation is isolated.
• Connection must be done in accordance with the applicable
regulations.
• Connection must conform to the wiring diagram.
!If any electrical connection other than that recommended
by Enertech is used, there is a risk of property damage and
personal injury.

13Bentone
4. Electric equipment
4.1 Safety system
The safety system (safety switch for hatches, doors, water level, pressure,
temperature and other safety devices) must be installed in the safety circuit in
accordance with current regulations for the system.
The cables of the safety system must be separated so that the outgoing signal
is not placed in the same cable as the incoming signal.
4.2 Wiring diagram
172 525 31-3
Alt. 1
Acc. to DIN 4791
Alt. 2 Alt. 3
E106205
Bn Brown
Bu Blue
Gn Green
Ye Yellow
Gn/Ye Green/Yellow
Bk Black
Gy Grey
Rd Red
Wh White
Og Orange
Vt Violet

14 Bentone
4.2.1 Component list
A1 Gas burner control S4 Temperature limiter
A3 Valve, leak tester, Dungs VPS504 (optional) S7 Main switch
A7 RC circuit S8 Air pressure switch
B1 Ionisation electrode S9 Gas pressure switch
U2 UV-sond QRC (LME23...) T1 Ignition Transformer
F1 Fuse Y1 Solenoid valve
H1 Lamp, operation X3 Plug-in contact, burner
M1 Burner motor X4 Plug-in contact, boiler
P1 Timer total operating time
S3 Control thermostat
LME11.230C2E
2 s
20 s
2.5 s
< 3 s
< 1 s
< 1 s
5 µA
20 µA
160303-312
Preiginition time
Prepurge time
Postignition time
Safety lockout time
Reset time after lockout
Reaction time on  ame failure
Min. ionisation current at  ame
Max. ionisation current
4.3 Function LME...
1. Operating switch ON-Thermostat ON-Gas pressure switch ON
A check that the air pressure switch does not indicate fan pressure is
carried out.
2. Burner motor starts
A check that the air pressure switch indicates sucient fan pressure is
carried out.
3. The ignition spark is created
4. The gas solenoid valve is open
The gas is ignited. The ionisation electrode now indicates a ame.
5. The safety time expires
The ignition spark ceases. The safety period ceases. If the spark is missing
or it disappears after this time limit, the gas burner control is blocked.
6. Operating position
7. Stop
The operation of the burner can now be stopped with the control switch or
thermostat.
If the gas burner control is blocked
Red light in the gas burner control is lit. The burner is restarted by pushing
the reset button.
4.3.1 Technical data
!Mains connection and fuse
in accordance with local
regulations.

15Bentone
Light period
(waiting period ≥ 10 s) Blinking code Pause Blinking codePress the reset
button > 3 s
4.4 Control program at faults; fault mode
indicator LME ....
4.4.1 Colour codes
4.4.2 Diagnosing alarm causes
After alarm disconnection, the red alarm signal light is lit continuously.
The diagnosing of the alarm cause can be read according to the following
sequence:
4.4.3 Limiting of starting repetitions
LME 11... has a function with start repetition if the ame is not created at start
or disappears during operation.. LME 11... allows max. three repetitions during
continuous starting cycle.
Table colour codes for multi-coloured signal light (LED)
Status Colour codes Colours
Waiting period «tw», other waiting periods ○………………… O
Ignition phase, ignition controlled ●○●○●○●○●○● Blinking yellow
Normal operation □………………… Green
Operation, poor ame signal □○□○□○□○□○ Blinking green
Illegal ame signal during start-up □▲□▲□▲□▲□▲ Green-Red
Undervoltage ●▲●▲●▲●▲●▲ Yellow-Red
Fault, alarm ▲………………… Red
Blinking code for fault codes ▲○ ▲○ ▲○ ▲○ Blinking red
Interface diagnostics ▲▲▲▲▲▲▲▲ Red icking
…… Continuous
○Off
▲Red
●Yellow
□Green

16 Bentone
4.4.4 Alarm code table
Red blinking code on
signal lamp (LED)
Possible causes
Blinking 2 x
••
No ame creation at End of “TSA”
–defective or fouled ame monitoring.
–defective or fouled fuel valves.
–poor burner setting.
–defective ring device.
Blinking 3 x
•••
“LP” defective
–No air pressure switch signal after “t10”.
–“LP” is welded in open position.
Blinking 4 x
••••
Illegal ame signal during start-up.
Blinking 5 x
•••••
Time out “LP”
–“LP” is welded in open position.
Blinking 6 x
••••••
Free
Blinking 7 x
•••••••
Too many ame disappearances during operation.
–poor burner setting.
–defective or fouled fuel valves.
–defective or fouled ame monitoring.
Blinking 8 x
••••••••
Free
Blinking 9 x
•••••••••
Free
Blinking 10 x
••••••••••
Connection fault or internal fault, outgoing contacts or
other faults.
Blinking 14 x
••••••••••••••
CPI contact not closed.
During the diagnosing of the alarm cause, the control outputs are voltage-
free.
• The burner is disconnected.
• Exception, alarm signal «AL» at board 10.
• Reconnection of the burner happens after resetting only.
• Press the reset button 0.5...3 s.
4.4.5 Interface diagnostics
To change to interface mode, press and hold the reset button longer than 3 s.
To go back to the normal position, press and hold the reset button longer than
3 s. If the gas burner control is in the alarm position, it is reset by pressing the
reset button 0.5...3 s.

17Bentone BFG 1
E
F
X1
X2
172 525 26-2
5. Mounting
5.1 Hole pattern
Check that the hole pattern on the boiler matches that of the ange, (see
Technical data).
5.2 Burner installation
1. Install the ange with gasket on the boiler.
2. Insulate between the blast tube and the boiler door to minimize heat
radiation.
3. Check the ignition electrode and ionisation electrode.
(Refer to Technical data).
4. Install the burner on the boiler and lock into the ange (E).
5. Install the gas line on the burner. Check that the O-ring has not been
damaged during installation, fasten with the screws (F).
6. Where support for the multiblock is included, this should be installed.
5.3 Gas connections
1. Check the gas pipe dimensions. (According to local regulations).
2. Connect the gas pipe to the gas ange of the multiblock.
3. A manual gas valve should be installed in the vicinity of the burner.
4. No mechanical stresses/forces should exist in the gas connection.
5. Check the sealing of the gas connections, including the multiblock
and anges.
NOTE!
If the gas connection is via a hose, the support for the multiblock that is
supplied with the burner should be mounted (F). Install the support so that the
underneath of the multiblock rests on it.
5.4 Electric connection
If the boiler does not have a pre-wired connector, connect in the included
connector, X2 according to the wiring diagram.
1. Turn off the main switch.
2. Connect the Eurostecker X2 acc. to Alt. 1 - 3, (see Electric equipment).
3. Install the Eurostecker X2 on the burner.
4. Turn on the main switch.

18 Bentone BFG 1
5.5 Gas quality
Check that the combustion head is intended for the gas quality to be used,
(see Technical data).
5.6 De-aerating
De-aerating the gas line by closing the tap to the gas connection and
unscrewing the screw on the measuring nipple for the connection pressure.
Connect a plastic hose, open the tap and drain the gas in a safe place. When
the de-aerating is completed, be sure to ret the screw on the measuring
nipple.
5.7 Tightness control
When checking for leakage, the solenoid valve must be closed. A pressure
gauge is connected to the measuring nipple ”Pa”, see picture. The test
pressure in the ttings should be 1.5 x max inlet pressure or min. 150 mbar.
If leaks are found during measurement, locate the source using soapy water
or leak detection spray. After sealing: check the tightness of the gas xture
again.
!Check the gas tightness.
Pa

19Bentone
5.8 Calculation of gas ow
Formula symbol Description Example values
VNStandard gas volume [Nm3/h]
Gas volume at normal condition 15 °C 1013 mbar
-
QBoiler output [kW] 70 kW
HiLower caloric value of gas [kWh/m3]
Natural gas under normal conditions 15 °C 1013 mbar, EN 676
9.45 kWh/m3
ηBoiler eciency (e. g. 90%) 0.9
fConversion factor (pressure and temperature compensation) -
tGas Gas temperature at gas meter [°C] 15 °C
PBaro Barometric air pressure [mbar] 945 mbar
PGas Pressure of gas at the gas meter [mbar] 20 mbar
V Operating volume [m3/h] -
VG Gas ow measured at the gas meter [m3] 0.23 m3
TMeasuring time for consumed gas quantity [s] 91 s
VN=
Q
VN =
70 kW
= 8.2 m3/h
η · Hi0.9 · 9.45 kW/m3
Calculate standard volume using the following formula:
f=
273
x
PBaro + PGas
f=
273
·
945 + 20
= 0.90
273 + tGas 1013 273 + 15 1013
Calculate conversion factor using the following formula:
V=VNV=
8.2 m3/h =9.1 m3/h
f0.90
Calculate gas volume using the following formula:
V=
3600 · VGV= 3600 · 0.23 m3
=9.1 m3/h
T91 sek
Determine operating volume with the following formula:
Gas quality kWh/Nm3MJ/Nm3
Natural gas G20 9.5 34.02
Natural gas G25 8.2 29.25
Caloric value of the gas
Lower caloric value Hi at normal conditions 15 °C and 1013 mbar, EN 676.
For exact caloric value of the gas, contact the gas distributor.
172 535 48
Height above
sea level [m] 0 100 200 300 400 500 600 700 800 900 1000 1100 1200
PBaro [mbar] 1013 1001 989 977 966 954 943 932 921 910 899 888 877
Gas quality kWh/Nm3MJ/Nm3
Butane G30 32.25 116.09
Propane G31 24.44 88.00

20 Bentone BFG 1
I
II
6. Settings
6.1 Brake plate adjustment
The burner is equipped with a control which changes the position of the brake
plate in the blast tube. This is used to set the correct pressure differential across
the combustion device and thereby get a good combustion without pulsations. The
setting to be used depends on the set effect and the overpressure in the boiler.
(For basic setting, see Technical data).
Brake plate settings
H1 och H2
• Smaller gap: turn the screw to the left
• Larger gap: turn the screw to the right
H3
• Smaller gap: turn the screw to the right
• Larger gap: turn the screw to the left
The setting of the brake plate position affects the air ow. Therefore, the air
must always be readjusted with the air regulation device of the burner.
6.2 Air adjustment
The air setting is very important to get good combustion with neither too
much nor too little air. The air ow for combustion is adjusted by turning the
air adjusting screw with an Allen key. How open the air control should be is
determined by the red-in effect and overpressure in the boiler, as well as
other settings on the burner such as the position of the brake plate.
(For basic setting, see Technical data).
6.2.1 Air volume
The setting of the air control depends on how the screw, with which the air
adjustment is done, is installed. If the air intake is pointing downwards as in
Fig. I, a clockwise turn gives a decrease in the air ow and a counter-clockwise
turn an increase in the air ow.
If the air intake is pointing upwards as in Fig. II, a clockwise adjustment
increases the air ow and a counter-clockwise adjustment decreases the air
ow.
172 525 27-2