Besantek BST-HVD9 User manual



 
 
 
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

INDEX
INTRODUCTION ...................................
FEATURES ............................................
SPECIFICATION ...................................
METHOD OF USE .................................
CLEANING &
REPLACING BATTERY .........................
CAUTIONS ............................................
COMBINATION OF
THE DETECTOR....................................
PAGE
1
2
3
4-5
6
6-7
8-15

-1-
INTRODUCTION
The personal safety voltage detector is a sensor for
sensing AC High Voltage. It provides electric engineering
personnel, power engineering personnel, reghting
personnel and instrument equipment workers with
prominent warning when approaching high voltage and
for taking necessary safety action, preventing illusion
and misjudgment which could lead to electric shock to
person.
When a person wearing the personal safety voltage
detector is approaching high voltage source or
equipment, the sensor will detect automatically and
buzzer will generate a "BeBe" sound for warning and
LED will ash to remind operators that the user is
approaching a high voltage sauce and special attention
shall be given to the safety of operations.

-2-
FEATURES
●Designed for detecting un-shielded cables. If the
shielding of the cable is connected to the ground, it
can't work.
●Compact, easy to wear and convenient in use.
●Usable both indoor and outdoor.
●Water-proof design. (IP65)
●Equipped with self-testing functions.
● Sound and ash light warning on different
frequencies varied positively with sensed voltages.
●Able to sense all kinds of AC High Voltage System.
●Low power consumption.
●Meets : EN 61326-1.
● CE Certied.
●Voltage detection :
Voltage Detection
angle
Detection
distance
6.6kV
(3.8kV phase to ground) 90° 40cm ± 20%
11.4kV
(6.6kV phase to ground) 90° 55cm ± 20%
19.7kV
(11.4kV phase to ground) 90° 80cm ± 20%
22.8kV
(13.2kV phase to ground) 90° 85cm ± 20%

-3-
SPECIFICATION
●Distance of starting warning :
85 cm for 22.8kV (phase to phase)
●Applicable frequency : 50 / 60 Hz
●110V ~ 22.8kV
●Volume : > 70dB at 1 meter distance
●Operating Temp & Humidity :
0°C - 40°C / 80% R.H. Max.
●Outside dimensions :
61(L) x 62 (W) x 18.5(D) mm
●Weight : 70g (incl. battery)
●Battery to use : CR2032 x 1
●Battery life : 50 hours for continuous use
●Accessories
Instruction manual
Elastic cord
Battery
Hook x 3
Elastic cord adjustment x 1
Connection ring x 2
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com




METHOD OF USE
  
 

 

  
 

 
   
-4-


 



-
  



 

-5-

-6-
CLEANING & REPLACING BATTERY
1. Sensing side shall maintain clean. The case may be
cleaned with soft fabric and mild detergent. No solvent
or corrosive agent may be used.
2. Replacing battery
(1) When the sound become weak, the battery shall
be replaced.
(2) Use coin to open battery cover and remove used
battery. Place new battery into slot with the battery
positive (+) face up and fasten battery cover with
coin.
CAUTIONS
1. This instrument is an auxiliary testing unit and
is only for obtaining warning as additional protection.
Never use this instrument as substitution for Tester.
Electrical Test shall be the prime electric testing
instrument.
2. Other than affected by now you wear, the sensing and
warning distance may be inuenced by direction of
electric article, ambient environment, shielding
objects and weather conditions.
3. Buzzer has inner water-proof lm. Do not pierce it with
sharp article.




 


 
 


 

  
HV cable which has an outer sheathing that is

INSULAON

LINE
COVERING
-7-


COMBINION OF THE DETECTOR


 11 r "!
:l t
1 . ,I
 

-8-



 


♦♦

 





 



"A" Si
"A" Si



  





THIN
0
X


 

 

1-�

I


 
 
 
 
6.
I -'
---








 


 


-
SHORT ELASTIC CORD











99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com