Besantek BST-CL01 User manual
Index
1. Introduction..........................................
2. Safety notes.........................................
3. Features..............................................
4. Specications......................................
5. Instrument layout.................................
6. Operation.............................................
7. Maintenance........................................
Page
1
2
3-4
5-6
7-11
12-20
21-22
1. Introduction
Note
&warning
2. Safety Notes
°
&
-2-
-3-
3.Features
Transmitter
●The transmitter is a great tool for locating and
identifying cables and individual conductors.
●Designed for locating unenergized cables and
powered cables.
●Voltage measurement for cables :
ACV 12V~300V
DCV 12V~300V
●Signal Transmission
• Transmission Power Level Selection
(includes 1, 2, 3)
• Transmission Signal Code Selection
(includes F, E, H, d, L, C, O, A)
● Flashlight & Back Light function.
●The Silent Mode (Disable Button Beep).
● The Level Bar Display on the LCD Screen
(the transmission power level indication).
● The Action Wave Display on the LCD Screen
(when the signal is transmitted).
●Auto power off function.
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
-4-
Receiver
●The receiver is designed to identify and trace wires
or cables.
●Designed for locating unenergized cables and
powered cables.
●Signal Detection (includes Level, Code, Value)
• Automatic Mode
• Manual Mode (There are 9 levels to select).
●UAC Mode (AC Power Line Detection)
● Flashlight & Back Light function.
●The Silent Mode (Disable Button Beep & Frequency
Tone)
●The Danger Symbol is to indicate the AC voltage on
the Line.
● The Level Bar Display on the LCD Screen for the
signal value & the UAC power value.
●Auto power off function.
-5-
4. Specications
Transmitter
Output signal frequency 125kHz
Voltage measurement range
Accuracy
12~300V AC / DC
±(2%rdg+2dgt)
Display LCD shows function and
bargraph
Power source 1.5V (AAA) battery × 6
Fuse 690V/0.5A (6.3 × 32mm)
Operating temperature
& humidity
0°C~40°C
80% R.H. Max.
Storage temperature
& humidity
-10°C~50°C
80% R.H. Max.
Dimensions 188(L)×90(W)×47(D)mm
Weight(battery included) Approx. 389g
Receiver
Detection depth < 50cm
Display LCD shows function and
bargraph
Power source 1.5V (AAA) battery × 6
Operating temperature
& humidity
0°C~40°C
80% R.H. Max.
Storage temperature
& humidity
-10°C~50°C
80% R.H. Max.
Dimensions 247(L)×78(W)×45(D)mm
Weight(battery included) Approx. 324g
" C "
-6-
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
-
5. Instrument layout
(4)
(5)
(9)
(8)
; IIIUII
-7-
(6)
(7)
-8-
(1) "+" Terminal
This is the positive terminal. Use the RED test
lead to connect.
(2) "COM" Terminal
This is the ground terminal. Use the Black test
lead to connect.
(3) Flashlight
(4) LCD
(5) ON/OFF Button
Press the ON/OFF button to turn on or turn off the
transmitter.
(6) Backlight and Mute Button
Press it to turn on or turn off the LCD Backlight.
Press and hold it for more than 1 second to switch
on or switch off the mute function.
(7) Flashlight Button
Press it to turn on or turn off the LED lights.
(8) TEST/STOP Button
Press it to send a transmission signal or stop
sending the transmission signal.
(9) LEVEL Button
Press it to enter into the level selection mode, the
"LEVEL" symbol will be flashing on the LCD.
There are 3 levels to select.
-9-
(10) CODE Button
Press and hold it for more than 1 second to enter
into the code selection mode, the "CODE" symbol
will be ashing on the LCD. There are 8 codes to
select: F, E, H, d, L, C, O, A.
(11) Button
Press it to select the level upwards when the
transmitter is in the level selection mode.
Press it to select the code upwards when the
transmitter is in the code selection mode.
(12) Button
Press it to select the level downwards when the
transmitter is in the level selection mode.
Press it to select the code downwards when the
transmitter is in the code selection mode.
-
Receiver
(1) Sensor of the Receiver
Sensor of the receiver is used to detect the
transmission signal.
(2) Flashlight
(3) LCD
(4) ON/OFF Button
Press the ON/OFF button to turn on or turn off the
receiver.
(5) MANU Button
Press it to enter into the manual detection mode,
there are 8 sensitivity levels to select.
(6) Backlight and Mute Button
Press it to turn on or turn off the LCD Backlight.
Press and hold it for more than 1 second to switch
on or switch off the mute function.
(7) UAC Button
Press it to switch to the non-contact voltage
detection mode(UAC mode).
(8) Flashlight Button
Press it to turn on or turn off the LED lights.
(9) Button
Press it to select the sensitivity level upwards
when the receiver is in the manual detection
mode.
(10) Button
Press it to select the sensitivity level downwards
when the receiver is in the manual detection
mode.
-11-
-12-
6. Operation
The transmitter has 3 different modes:
●Test mode:
When the power is on, the transmitter is on the test
mode. It can measure the AC or DC voltage of cable.
When the user presses the TEST/STOP button, the
transmitter will send a high frequency transmission
signal down the cable. When the user presses the
TEST/ STOP button again, the transmitter will stop
sending the transmission signal.
● Level selection mode:
Press the LEVEL button to enter into the level
selection mode of the transmitter, the LEVEL symbol
will be ashing. User can press or button to
select the level of the transmission signal (level: 1~3).
The transmitter will return to the test mode by pressing
the LEVEL button again.
●Code selection mode:
Press and hold the CODE button for more than 1
second to enter into the code selection mode of the
transmitter, the CODE symbol will be ashing. User
can press or button to select the code of the
transmission signal (code: F, E, H, d, L, C, O, A).
Once the code selection is done, the transmitter will
return to the test mode by pressing the CODE button
again.
-13-
The receiver has 3 different modes:
●Auto detection mode:
When the power is on, the receiver is on the auto
detection mode to detect the high frequency
transmission signal with the highest sensitivity.
The speaker in the receiver will generate a
tone(550Hz ~ 1.6kHz) and the bar-graph on the LCD
indicates the signal strength.
●Manual detection mode:
Press the MANU button to enter into the manual
detection mode. On the manual detection mode, user
can select the signal sensitivity level (8 steps) by
pressing or button. The receiver will return to the
auto detection mode by pressing the MANU button.
●UAC detection mode:
Press the UAC button to enter into the non-contact
voltage detection mode (UAC mode) for non-contact
voltage detection. The is for checking the AC power
lines or the wall outlets.
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Cable Locating:
-17-
Table of contents
Other Besantek Security Sensor manuals
