Bestier D074G User manual

01
ASSEMBLY
INSTRUCTION

02
UNIT:INCH
DETAILS
HELPFUL HINTS
BEFORE YOU START
OTHER
People needed for assembly: 1-2
Be cautious when using a power drill or power screwdriver.
Push, pull or drag this item carefully.
Do Not use any harsh chemicals or abrasive cleaners for this item.
Please be aware to slow down and stop when screw is nearly tight.
Inspect product packaging to ensure the appearance is good.
Read the assembly instruction carefully and follow it step by step.
To avoid any scratching, putting a soft blanket on the floor
is suggested.
Identify, sort and count all the parts with tags.
Find out installation position according to the drawing and install
it in correct steps.
CAUTION
Estimated assembly time: 0.5-1 hour.

PARTS LIST
03
ACCESSORIES LIST
×1×2×2
×2×2
×1
×2×2×3×2

04
STEP 2
STEP 3
※ You can install the shelf board in different
height to meet your need. Do not tighten
the screws before step 9 finished.
STEP 1

05
STEP 6
STEP 5
Attention: Please make sure correct screws
is used in different parts.
Do not tighten the screws in
this step
※ Do not tighten the screws before step 9
finished.
STEP 4
Attention: Please make sure correct screws
is used in different parts.
Do not tighten the screws in
this step
※ Do not tighten the screws before step 9
finished.

06
STEP 8
STEP 9
STEP 7
※ Tighten all screws in this
step when there is not gap.
※Tighten the screws in this step.
※ Tighten the screws in this step.