BesTrix CM12C User manual

Dear Customer,
Congratulations on your purchase and welcome
to the Bestrix Family.
Our goal is to meet and surpass all your
expectations by providing you with the best
products and support possible.
S
hould you have any questions, our team is
always at your disposal to answer and help
you out.
Our Email: [email protected]om
Sincerely,
BesTrix Team.
Scan the QR Code for a video user manual

Please read before installing
Please read this user manual carefully and follow the instructions
to ensure your satisfaction from our product
This holder can be installed on the windshield or on the dashboard
(need to install the dashboard pad firstly).
We recommends to use the included Dashboard Pad for dashboard
mounting only. This will help mounting on curved and textured
surfaces as well as prevent any protentional dashboard damages.
The adhesive tape on the underside of the dashboard pad is
not reusable, please test the position of your mount before you
remove protective cover and stick it to your dashboard, Bestrix is
not liable for any damages related for product misuse.
Do not install the holder under direct sun. we recommend the
surface and product to be above 40° F
After installation wait 2 hours before use.
Do not operate phone and holder while driving.
Scan the QR Code for a video user manual

Remove Cradle Knob
and place over Ball Joint.
1
Connect & push the
mounting cradle to the
ball joint until you hear it
“click” in position.
Tighten the cradle knob.
2
3

Before installing
Find the desired
location and make
sure that it’s not
obstruct the driving
view.
Adjust the angles
of the mount’s arm
and the cradle
and locking them.
4
5

For best practice use the included dashboard
mounting pad on curved or textured surfaces.
Important note! the adhesive tape is not reusable.
Please test the position of the mount before
removing the protective cover and sticking it to
your dash.
Important! Clean the chosen area with the alcohol
pad (included). Allow to fully dry before installing
the Dashboard pad.
A. Remove the protection paper from the gel pad.
We recommend letting the Dashboard pad sit for 2 hours Before applying
6
7
8

A. Remove the protection paper from the gel pad.
Press down the
suction cup's base
to remove all air
from underneath.
While pressing the
suction cup's base
down, move the
locking lever to
"Lock".
We recommend letting the Dashboard pad sit for 2 hours Before applying
9
10
11
B. Move the
locking lever
to “unlocked”
position.

We recommend squeezing the locking side arms once in a while
when your phone is attached to the cradle, to ensure a secure grip
Open the locking
side-arms by pressing
the release button
Attach your phone and
squeeze the locking
side arms to securely
lock the phone in place
12
13

We recommend squeezing the locking side arms once in a while
when your phone is attached to the cradle, to ensure a secure grip
The Bestrix unique enables you
to eortlessly attach and remove your phone from
the cradle in a quick and seamless way, with no extra
adjustments needed

www.bestrix.com
If you have any questions
you can contact us at:
[email protected]
Scan the QR Code to Get a
Valid for 30 days from the purchase date*
*FREE 1 Year Warranty Extension