BETTER BODY TWIST DUMBBELL RACK User manual

BETTER BODY
TWIST DUMBBELL
RACK
OWNER’S MANUAL
NOTE: PLEASE READ ALL
INSTRUCTIONS CAREFULLY
BEFORE USING THIS PRODUCT.
[e-mail]

PRECAUTIONS
• Ensure that all of the bolts are properly tightened before use. Also, make sure that all pieces
of the stand are fastened the right way as seen in the photos.
• When loading dumbbells on and off the stand, do so in a safe and controlled manner. Do not
throw the dumbbells or use excessive momentum when placing them on the stand.
• Do not lean on the stand.
• Keep children and pets away from the stand.
Use 4 screws and washers to secure the base
to the arm.
STEP
1
STEP
2
Place and secure the third bar with the dumbbell
holders horizontally facing the feet of the base. Use 4
more screws and washers to secure the bar properly.
Now place the dumbbell holders on the dumbbell
stand and install the piece shown above on top of
the dumbbell bases. Please ensure that this step
is done in the correct order otherwise the
dumbbell stand will not fit properly.
STEP
3
STEP
4
Now you can place your dumbbells on the stand.
Before you do so, make sure to fasten all of the bolts
one final time to optimize the stability of the stand.