Better Sporting Dogs 0216C User manual

1
This is meant as a toy and /or training device only. Inspect equipment before each use. 0216C R1.1 06.29.20
The Original Dog Agility Kit - 0216C
Assembly Instructions
Thank you for your purchase! Our goal at Better Sporting Dogs is to bring fun, quality equipment to dog enthusiasts just like ourselves
at a reasonable cost. Agility training is a fantastic way to train your dog both mentally and physically and also deepen the bond you
have with your dog. The Original Dog Agility Kit is a great way to begin training or keep up with the training you already have!
Please see the assembly instructions below. If at any point you need assistance in assembly or have any questions or concerns, we can
be reached at: [e-mail]
Tunnel & Sand Bags Assembly:
To assemble the tunnel, first remove it from the packaging.
There are Velcro straps that keep it compressed when in the
bag. Untie all four Velcro straps and the tunnel will pop open
and be ready to be used.
Place the sandbags over both ends of the tunnel. Place the
Velcro straps at the top of the tunnel, so the weighted ends
can ‘hug’ the bottom and keep it in place. Carefully fill the
sandbags with your material of choice. Do not fill the
sandbags with more than 15 lbs of weight.
When placing the tunnel back in the bag, tie the Velcro straps
snugly around the tunnel so that it fits nicely in the bag.

2
This is meant as a toy and /or training device only. Inspect equipment before each use. 0216C R1.1 06.29.20
Pause Box Assembly:
Connect white long poles (A) into 90-degree elbow joints to form a
square pause box as shown below.
(A) 4 White long poles- 25.5'' long
(B) 4 90-Degree elbow joints

3
This is meant as a toy and /or training device only. Inspect equipment before each use. 0216C R1.1 06.29.20
Weave Pole Assembly:
Assemble the base. Insert two short poles (B) into one five-way connector (C) as shown. Repeat this step the 5 times. Connect each
five-way connectors (C) with the white long poles (A). Place end caps (D) on the exposed ends of the base poles (B).
Assemble the upright poles. Place 6 white long poles (A) in the upward facing openings of the five-way connectors (C). Place end caps
(D) on the exposed ends of the white long poles (A).
B
C
A
D
(A) 11 White long poles- 25.5'' long
(B) 12 White short poles- 8.5'' long
(C) 6 Five-way pole connectors
(D) 18 Soft black caps

4
This is meant as a toy and /or training device only. Inspect equipment before each use. 0216C R1.1 06.29.20
Standard Jump Assembly:
For the base, you will use the parts (A), (B), (E) and (F). Insert two short poles (B) into one five-way connector (E) as shown. Repeat
this step for the other five-way connector (E). Connect the two five-way connectors (E) with the long pole (A). Place end caps (F) on
the exposed ends of the short poles (B).
Assemble the upright poles. Take one of the long poles (A) and one of the short poles (B) and join them using an internal pole
connector (C). Repeat for the other upright pole. Insert the upright poles into the upward facing holes of the five-way connectors (E).
Next, assemble blue jump pole (G) and the 2 black pole clasps (D). The black clasps connect to the blue jump bar (G) and the white
long poles (A), on opposite ends. Finally, place 2 soft black caps (F) on the exposed
tips of the upright poles (A).
D
E
C F
A
B
G
A 3 White long poles- 25.5'' long
B 6 White short poles- 8.5'' long
C 2 Internal connectors- 4.5'' long
D 2 Black pole clasps
E 2 Five-way pole conectors
F 6 Soft black caps
G 1 Blue jump pole

5
This is meant as a toy and /or training device only. Inspect equipment before each use. 0216C R1.1 06.29.20
Tire Jump Assembly:
For the base, you will use the parts (A), (B), (E) and (F). Insert two white short poles (B) into one five-way connector (E) as shown.
Repeat this step for the other five-way connector (E). Connect the two five-way connectors (E) with the white long pole (A). Place
end caps (F) on the exposed ends of the short poles (B).
Assemble the upright poles. Take one of the (A) white long poles and one of the (B) white short poles and join them using an internal
pole connector (C). Repeat for the other upright pole. Insert the upright poles into the upward facing holes of the five-way connectors
(E). Next, assemble blue tire jump (G) and the 2 black pole clasps (D). The “teeth” of the black clasps connect to the blue tire (G) and
the upright poles. Finally, place 2 soft black caps (F) on the exposed tips of the
upright poles.
D
E
C F
A
B
G
A 3 White long poles- 25.5'' long
B 6 White short poles- 8.5'' long
C 2 Internal connectors- 4.5'' long
D 2 Black Tire Jump clasps
E 2 Five-way pole conectors
F 6 Soft black caps
G 1 Blue tire jump