Beurer HK 48 Cosy User manual

Beurer GmbH • Söinger Str. 218 • D-89077 Ulm, Germany
Tel.: +49 (0)7 31 / 39 89-144 • Fax: +49 (0)7 31 / 39 89-255
www.beurer.com • Mail: [email protected]
D Sofa-Heizkissen
Gebrauchsanweisung........... 2
G Sofa Heating pad
Instruction for Use................ 9
F Coussin chauffant pour
canapé
Mode d´emploi .................... 15
E Almohada eléctrica para el
sofá
Instrucciones para el uso... 22
I Termoforo per divani
Instruzioni per l´uso ............ 29
T Divan ısı yastığı
Kullanma Talimatı ............... 35
r Электрическая грелка
Инструкция по применению .. 41
Q Poduszka elektryczna na sofę
Instrukcja obsługi ............... 49
06.0.43510 Hohenstein
HK 48 Cosy

9
ENGLISH
Contents
Explanation of symbols
Read the instruc-
tions! 30°C extra gentle washing program
Do not bleach
Do not insert pins! Do not tumble dry
Do not iron
Do not use folded or
rucked! Do not dry-clean
Do not wash
Not to be used by
very young children
(0 - 3 years).
06.0.43510 Hohenstein
The textiles used for
this device meet the
stringent human eco-
logical requirements
of Oeko Tex Standard
100, as verified by
Hohenstein Research
Institute.
WARNING: Warning of risks of injury or health hazards
1. Items included in the package .........................10
1.1 Description ...................................................10
2. Important instructions
Retain for future use ........................................10
3. Intended use ......................................................12
4. Operation............................................................12
4.1 Safety ...........................................................12
4.2 Initial use ......................................................12
4.3 Switching on.................................................12
4.4 Setting the temperature................................12
4.5 Automatic switch-off ....................................13
4.6 Switching off.................................................13
5. Cleaning and maintenance...............................13
6. Storage ...............................................................14
7. Disposal..............................................................14
8. What if there are problems?.............................14
9. Technical data....................................................14

10
CAUTION: Safety information about possible damage to
appliance/accessories.
NOTE: Important information.
1. Items included in the package
1Heating pad
1Inner pad
1Controller
1Instructions for use
1.1 Description
1. Mains plug
2. Mains cable
3. Controller
4. Illuminated display for temperature settings
5. Sliding switch for ON/OFF and temperature
settings
6. Plug-in coupling
7. Cover with integrated heating pad
8. Inner pad
9. Zip fastening
2. Important instruc-
tions
Retain for future use
WARNING
• Non-observance of the following notes may result in personal injury
or material damage (electric shock, skin burns, fire). The following
safety and hazard information is not only intended to protect your
health and the health of others, it should also protect the product.
For this reason, pay attention to these safety notes and include these
instructions when handing over the product to others.
• This heating pad must not be used by people who are not sensitive
to heat or by vulnerable people who may not be able to react to over-
heating.
• This heating pad may not be used by very young children (0-3 years
old) as they are unable to respond to overheating.
• This heating pad may not be used by young children (3-8 years old)
unless the controller has been set by a parent or responsible adult
6
7
8
9
0
1
2
3
1
2
3
45
6

11
and the child has been given adequate instructions on how to use the
heating pad safely.
• This heating pad may be used by children over the age of 8 and by
people with reduced physical, sensory or mental skills or a lack of ex-
perience or knowledge, provided that they are supervised and have
been instructed on how to use the heating pad safely, and are fully
aware of the consequent risks of use.
• Children must not play with the heating pad.
• Cleaning and user maintenance must not be performed by children
unless supervised.
• This heating pad is not designed for use in hospitals.
• Do not insert needles.
• Do not use when folded or bunched up.
• Do not use if wet.
• This heating pad may only be used in conjunction with the controller
specified on the label.
• The electrical and magnetic fields emitted by this heating pad may
interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker
before using this heating pad.
• Do not pull, twist or make sharp bends in the cables.
• Please check this heating pad frequently for signs of wear and tear or
damage.
If any such signs are evident, if the heating pad has been used incor-
rectly or if it no longer heats up, it must be checked by the manufac-
turer before being switched on again.
• If the mains connection cable of the heating pad is damaged, it must
be replaced by the manufacturer, its customer service department or
a similarly qualified person to avoid any risk.
• While the heating pad is switched on, the following conditions must
be observed:
– Objects must not be placed on the pad (e.g. suitcase or washing
basket).
– Heat sources, such as hot water bottles, heating pads or similar,
must not be placed on the pad.
• The electronic components in the controller warm up when the
heating pad is in use. For this reason, the controller must never be
covered or placed on the heating pad when it is in use.

12
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
• If you should have any questions about using our devices, please
contact Customer Services.
3. Intended use
CAUTION
This heating pad is only designed to warm up the human body.
4. Operation
4.1 Safety
CAUTION
The heating pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against
overheating across the entire surface of the heating pad with an automatic switch-off in the event of a
fault. If the SAFETY SYSTEM has switched off the heating pad, the temperature settings are no longer
illuminated when switched on. Please note that for safety reasons, the heating pad can no longer be
operated after a fault has occurred and must be sent to the specified service address.
4.2 Initial use
CAUTION
Ensure that the heating pad will not bunch up or become folded during use.
• First, connect the controller to the heating pad by inserting the plug-in coupling.
•Then plug the mains plug into the socket.
NOTE
The side of the cover (7) with integrated heating pad must be turned towards the body for
optimum heat transfer.
4.3 Switching on
To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3.
The temperature settings (4) are illuminated when switched on.
4.4 Setting the temperature
Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOTE:
• The fastest way to warm up the heating pad is to initially set the highest temperature setting.

13
NOTE:
These heating pads have a fast heating function, which allows the pad to warm up faster
in the first 10 minutes.
WARNING
If the heating pad is being used over several hours, we recommend
that you set the lowest temperature setting on the controller to avoid
overheating the heated body part, which may lead to burns to the skin.
4.5 Automatic switch-off
This heating pad is equipped with an automatic switch-off function. This turns off the heat sup-
ply approx. 90 minutes after the initial use of the heating pad. The temperature setting display
then starts to flash. So that the heating pad can be switched back on, the sliding switch for ON/
OFF and temperature settings (5) must first be set to setting “0” (OFF). After about 5 seconds
it is possible to switch it on again.
4.6 Switching off
To switch the heating pad off, set the sliding switch for ON/OFF and temperature settings to setting “0” (OFF).
The temperature settings are then no longer illuminated.
NOTE:
If the heating pad is not in use, switch the sliding switch for ON/OFF and temperature settings to setting
“0” (OFF) and unplug the mains plug from the socket. Then disconnect the controller from the heating
pad by unplugging the plug-in coupling.
5. Cleaning and maintenance
WARNING
Before cleaning, always remove the mains plug from the socket first. Then disconnect the controller
from the heating pad by unplugging the plug-in coupling. Otherwise there is a risk of an electric shock.
CAUTION
• The controller must never come into contact with water or other liquids, as this may cause damage.
To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
The heating pad consists of the cover with integrated heating pad (outside) and the inner pad.
Always remove the inner pad before cleaning. To do this undo the zip fastening. The inner pad is
not washable.
Small marks on the cover with integrated heating pad can be removed with a damp cloth and a
small amount of mild liquid laundry detergent.
The cover with integrated heating pad is machine-washable. For ecological reasons, always wash
it together with other textiles. Set the washing machine to a particularly gentle wash cycle at 30°C
(wool cycle). Use a mild laundry detergent and measure it out according to the manufacturer‘s
instructions.
IMPORTANT
Please note that frequent washing of the cover with integrated heating pad will adversely affect the
product.
It should therefore be washed in a washing machine a maximum of 10 times during its life.
90 min
STOP

14
IMPORTANT
Please note that the cover with integrated heating pad must not be dry cleaned, wrung out, tumble
dried, put through a mangle or ironed.
Immediately after washing, reshape the cover with integrated heating pad to its original dimensions
while it is still damp and spread it out flat on a clothes horse to dry.
IMPORTANT
•Do not use pegs or similar items to attach the cover with integrated heating pad to the
clothes horse. Failure to observe this may result in damage to the item.
•
Do not reconnect the controller to the heating pad until the cover with integrated heating pad, the
plug-in connector and the inner pad are completely dry. Otherwise there is a risk of electric shock.
Fit the inner pad back into the cover with integrated heating pad.
WARNING
• Never switch the heating pad on to dry it! Otherwise there is a risk of electric shock.
6. Storage
If you do not plan to use the heating pad for a long period of time, we recommend that you store it in the
original packaging.
CAUTION
Please allow the heating pad to cool down before storing. Otherwise the heating pad may be damaged.
To avoid sharp folds in the heating pad, do not place any objects on top of it while it is being stored.
7. Disposal
Please dispose of the heating pad in accordance with Directive on Waste Electrical and Electronic
Equipment (WEEE). In case of queries, please contact the
municipal authorities responsible for waste disposal in your area.
8. What if there are problems?
Problem Cause Solution
The temperature settings are not illuminated while
- the controller is properly connected to the heating pad;
- the mains plug is connected to a working socket;
- the sliding switch is set to 1, 2 or 3.
The safety system has
switched the heating
pad off permanently.
Send the heating pad
and the controller for
servicing.
9. Technical data
See the rating label on the heating pad.