Hub Controls HubController User manual
Method 2
User: Alexa, tell Hub Controller to
pair Hub
Alexa asks for Hub Controller name
User: Call hub ‘living room’
Alexa asks for pairing code
User: Pairing code is...
Alexa asks for confirmation
User: Yes
Alexa: Hub Controller and pairing code
are saved
Method 1
User: Alexa, open Hub Controller
Alexa gives instructions
User: Pair Hub
Alexa asks for Hub Controller name
User: Call hub ‘living room’
Alexa asks for pairing code
User: Pairing code is...
Alexa asks for confirmation
User: Yes
Alexa: Hub Controller and pairing code
are saved
First things first, pair your Alexa with the Hub Controller.
The pairing code can be found on your Hub Controller:
menu -> pairing
Available Hub Controller names:
basement
bathroom
bedroom
bedroom one
bedroom three
bedroom two
master bedroom
boiler
cellar
closet
control
den
dining room
downstairs
front yard
garage
hall
hallway
home
hot press
kitchen
landing
laundry
living room
lounge
office
pantry
patio
play room
porch
sitting room
staircase
study
thermostat
TV room
upstairs
utility room
water
workshop
attic
Use voice commands to control your home's heating
You can even pair multiple Hub Controllers.
Getting started
HubController Alexa Skills
Quick Guide
Note: Pair each Alexa device separately with its own pairing code.
Set temperature to a desired value.
Turn the heating on using methods below.
Replace ‘on’ with ‘off’ below to turn the heating off.
Use ‘boost’ instead ‘heating’ to use 60 min boost.
Method 1:
User: Alexa, open Hub Controller
Alexa gives instructions
User: What is the temperature in
‘living room’
Alexa replies with information requested
Method 2:
User: Alexa, ask Hub Controller what is
the temperature in ‘living room’
Alexa replies with information requested
Method 1:
User: Alexa, open Hub Controller
Alexa gives instructions
User: Turn heating on in ‘living room’
Alexa replies with information requested
Method 2:
User: Alexa, tell Hub Controller to turn
heating on in ‘living room’
Alexa replies with information requested
Method 1:
User: Alexa, open Hub Controller
Alexa gives instructions
User: Set temperature to 21 degrees
in ‘living room’
Alexa replies with information requested
Method 2:
User: Alexa, tell Hub Controller to set
temperature to 21 degrees in ‘living room’
Alexa replies with information requested
Check the current status
Check heating status and current room temperature.
Turn heating or boost on/off
Change set temperature
Increase set temperature by half a degree.
Use ‘decrease’ to decrease the set temperature by half a degree.
Method 1:
User: Alexa, open Hub Controller
Alexa gives instructions
User: Increase temperature in ‘living room’
Alexa replies with information requested
Method 2:
User: Alexa, tell Hub Controller to increase
temperature in ‘living room’
Alexa replies with information requested
Remove or ‘delete’ previously paired Hub(s).
Method 1:
User: Alexa, open Hub Controller
Alexa gives instructions
User: Set default to ‘living room’
Alexa confirms default has been set
Method 2:
User: Alexa, tell Hub Controller to set
default to ‘living room’
Alexa confirms default has been set
Method 1:
User: Alexa, open Hub Controller
Alexa gives instructions
User: Remove ‘living room’
Alexa: ‘Living room’ has been deleted
Method 2:
User: Alexa, tell Hub Controller to remove
‘living room’
Alexa: ‘Living room’ has been deleted
Set a default Hub
Tired of using Hub’s name? Have multiple Hubs?
Set a default Hub for ease of use.
Remove paired Hub
Now you can use all the previously mentioned commands without having
to use the Hub name e.g.
‘Alexa, ask Hub Controller what is the temperature?’ or
‘Alexa, ask Hub Controller to increase temperature?’
Have a question?
Happy to help
The Happy
Heating Hub
®
