Multiple peripherals of the same type connected
EasyConnect MPX 100 supports multiple devices connected to the USB ports.
Please note the following behaviors:
• With Logitech RoomMate
If multiple USB peripherals of the same type (mic, speaker, camera) are connected to the EasyConnect MPX 100
"Room A/V" USB ports, the switchback from the Laptop to the RoomMate UC does not happen automatically. User
intervention is required to select the peripherals to use on RoomMate.
• With Biamp Vidi and Parlè cameras
If multiple Biamp cameras (Vidi 100, Vidi 150, Vidi 250, Parlè VBC 2500) of the same model are connected to the
EasyConnect MPX 100 "Room A/V" USB ports, the switchback from the laptop to the UC does not happen
automatically. User intervention is required to select the camera on the UC.
Administration
Accessing the admin console
The Web Administration Console is used to manage the parameters and settings of the EasyConnect device via web
browsers. From the browser, navigate to the sign-in page by either going to
https://<IP-ADDRESS>/settings
or to:
https://EasyConnectMPX100-<SERIAL-NUMBER>.local/settings
No username is needed; the default password is the device's 8-digit serial number. After entering the correct
username and password, use the sidebar on the left to select pages for specific settings. It is recommended to change
the password in the Device page after the first access, to protect the security of the system.
Maintenance operations and firmware update
The Administration Console’s Device page displays information about the model, serial number, and currently installed
firmware version.
Copyright 2013-2020 Biamp Systems http://support.biamp.com/ 5
