EefaCo.Store 88 5531 21 User manual

PART LIST
HARDWARE LIST
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
A.
Top Unit
1 pc.
B.
Leg
4 pcs.
C.
Shelf
1 pc.
Flat Washer
12 pcs. (+1 extra )
Spring Washer
12 pcs. (+1 extra )
Tools Required For Assembly : Phillips screwdriver
Key Wrench
1 pc.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Bolt
12 pcs. (+1 extra )
88 5531 21
Bedford Cocktail Table

Assembly Instructions
STEP 1
IMPORTANT
Do not tighten up all the bolts until each part is properly assembled. You should keep Key Wrench in a safe place as you
may need to tighten up the Bolts in the future.
Turn the Top (A) upside down
and place it on a soft cloth.
Remove all the drawers.
STEP 2
STEP 3 Figure 1
Flat Washer
Spring Washer
Bolt
Key Wrench
Bolt
Spring Washer
Flat Washer
B
B
C
B
B
A
A
Turn the unit over to its’ upright position.
Slide the drawers into position
Remove the Pull Handles that are installed
on the inside of the drawers and re-install
them on the outside of the drawer.
(See figure 2)
.
Figure 2
Attach Legs (B) to Top (A)
with Flat Washers, Spring
Washers and Bolts.
Tighten the bolts half way.
(See figure 1)
Attach Shelf (C) to the unit
with Flat Washers, Spring
Washers and Bolts.
Tighten up all bolts.