Household Essentials 8018-1 User manual

Entryway
Shoe Storage
Bench
8018-1
8024-1

Parts -
Identify parts before assembling.
Long screw
Short screw Handle screw
Lx20
Cam lock
Ax1
Top panel
Gx1
Bottom panel Hx1
Moulding
Ix1
Right side panel
Jx1
Left side panel
Kx2 Back panel
Cushion
Bx2
Drawer dividers Dx2
Outer shoe dividers
Ex2
Inner shoe dividers
Cx1
Shoe panel
Fx1
Drawer panel
Cam screw Wood dowel
Rx3 Sx3
Handle
Ox8
Px14
Nx31Mx20

Insert hardware into assembly pieces as shown.
Assembly
(M) (N)
(N)
(N) (N)
(N)
(N)
(M)
(N)
(M)
(M) (M)
1

Insert shoe dividers (D/E) into slotted shoe panel (C) so that
panels are in the following order: D, E, E, D
Attach drawer dividers (B) to the top side of drawer
panel (F) using long screws (O). The top side of panel F
has the wider-set holes.
Insert 4 cam locks (L) into the side predrilled
holes on shoe dividers (D). Attach drawer panel
(F) to shoe dividers (D/E). Turn cam locks to
lock assembly.
Assembly cont’d
2
3
4
(O)

Insert 4 cam locks (L) into the side predrilled holes in (B). Attach top
panel (A) to drawer dividers (B). Turn cam locks to lock assembly.
Attach bottom panel (G) to shoe dividers (D) and (E).
Screw bottom panel (G) into place using long screws (O). Insert 2 cam locks (L)
into predrilled holes in moulding (H). Attach moulding to bottom panel (G). Turn
cam locks to lock assembly together.
5
6
7
(O)
H

Insert 10 cam locks (L) into predrilled holes on the sides of
assembly that line up with cam screws in side panels (I/J).
Attach side panels (I/J) to assembly. Turn cam locks (L) in
assembly to lock assembly together.
Attach back panels (K) using short screws (P).
Assembly cont’d
8
9
(P)

Remove adhesive backing from hook and loop strips on the underside of
cushion. Position on the top side of top panel (A) and press into place.
Unfold drawers and lay bottom panel inside
as a liner / base.
Attach handles: fit handles (S) on drawer
fronts and secure from inside the drawer
with screw (R).
Insert drawer into cubby. FINISHED.
10
11
Cushion
NOTE: Screws may already be
screwed into handles.

1/2020