BIG FURNITURE WAREHOUSE HAMPTON User manual

Page 1 of 9
Thank you for purchasing the HAMPTON ACACIA LAMP TABLE．
Please read the instructions carefully to ensure safe operation of the product.
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of
construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list.Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the
assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should
be kept away from young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required
Size:39X28X56CM
Colour:ACACIA
HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
Batch No.: WMI 15081
X1

Page 2 of 9
IMPORTANT -
READ CAREFULLY
- RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
•
•
Due to the size of this product we recommend that it is assembled in the room intended for
use.
•
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
•
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
•
Check the pack and make sure you have all the parts listed.
•
Ensure that this product is fully assembled as illustrated before use.
• Check all screws or bolts are tighten
•
•
•
This product should only be used on firm,level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
ed and inspect regularly
• Tools not included.
WARNINGS
•DO NOT use power tools to construct this product.
•DO NOT tighten screws until fully assembled.
•DO NOT over tighten screws or bolts.
•
DO NOT use this product if parts are missing, damaged or worn.
•DO NOT sit or stand on the product.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
•To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
•
Batch No.: WMI 15081
We recommend the use of the wall fixing provided for safety reasons. N.B. If in doubt
please consult a qualified tradesperson.
This product is intended for a maximum weight of 50 kg.
Do not exceed this weight.
•It is essential that this unit is fixed to a wall with the fixings provided.
WARNING: Always ensure the area to be drilled
is free from hidden electrical wires, water and gas pipes.

HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
Page 3 of 9
Batch No.: WMI 15081
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
3
14
2
4
1
3

PARTS
1 3
HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
Page 4 of 9
Batch No.: WMI 15081
SIDE PANEL(LEFT/RIGHT)Description:
Qty:2PCS
Carton No.:1 of 1
BACK PANELDescription:
Qty:2PCS
Carton No.:1 of 1
SHELFDescription:
Qty:1PC
Carton No.:1 of 1
2
TOP/BOTTOM PANELDescription:
Qty:2PCS
Carton No.:1 of 1
4

FITTINGS(to scale)
(Not to scale)
8
8
8
8
8
8
4
2
2
E
F
A
B
C
D
G
H
I
DOWEL（ 8X30mm）
DOWEL（ 6X30mm）
FOOT
WALL FIXING
WALL FIXING
Ref Dimensions Qty
HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
Page 5 of 9
Batch No.: WMI 15081
10 20 30 40 50 60 70 80 90 100
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!
CAM BOLT（ 7X54mm）
CAM BOLT（ 7X28mm）
CAM NUT（ 14X11mm）
CAM NUT（ 13X10mm）

Layout Parts on So Surface
HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
Don’t screw too deep
Hints and Tips
Page 6 of 9
Batch No.: WMI 15081
Lay out all parts on a soft surface i.e. Rug,Carpet or Packaging Carton
1
1
2
3
3
4
4

STEP 1
STEP 2
Page 7 of 9
Parts Required
HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
Batch No.: WMI 15081
1. SIDE PANEL(LEFT/RIGHT) X 1
2. SHELF X 1
3. TOP/BOTTOM PANEL X 1
4. BACK PANEL X 1
C. CAM NUT X 4
B. CAM BOLT X 4
A. CAM BOLT X 4
F. DOWEL X 4
E. DOWEL X 4
D. CAM NUT X 4
1. SIDE PANEL(LEFT/RIGHT) X 1
3. TOP/BOTTOM PANEL X 1
4. BACK PANEL X 1
C. CAM NUT X 4
B. CAM BOLT X 4
A. CAM BOLT X 4
F. DOWEL X 4
G. FOOT X 4
E. DOWEL X 4
D. CAM NUT X 4
Parts Required
3
14
2
A
A
A
A
B
B
B
B
CC
CC
FF
E
E
E
E
FF
DD
D
D
1
A
A A
A
B
B
B
B
C C
C
C
F
F
F
F
E
E E
E
3
G
D
D
D
D
4
2
Don’t screw too deep
Don’t screw too deep

HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
Page 8 of 9
Batch No.: WMI 15081
Parts Required
H. WALL FIXING X 2
I. WALL FIXING X 2
H
H
I
WALL
WALL STRAP

HAMPTON ACACIA LAMP TABLE ASSEMBLY INSTRUCTIONS
COMPLETE ASSEMBLY
Page 9 of 9
Batch No.: WMI 15081
Your HAMPTON ACACIA LAMP TABLE is now completely assembled.
Keep instructions for future reference
Periodically check to ensure that the components are in their proper position, free
from damage.
Also, make sure the connectors are tight and secure.