BIG FURNITURE WAREHOUSE LANCASTER LAMP TABLE User manual

LANCASTER - LAMP TABLE ASSEMBLY INSTRUCTIONS
Size: (W)450 x (D)450 x (H)500mm
450
500
450
Thank you for purchasing the LANCASTER LAMP TABLE.
Please read the instructions carefully to ensure safe operation of the product.
Batch No : PO# 3487
Page 1 of 12 V1 6/18

This product is intended for a maximum weight of 10kgs and drawer load capacity 4kg each.
Do not exceed this weight.
Due to the size of this product we recommend that is assembled in the room intended for use.
When you ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly
Unwrap all packaging materials and place the components on top of the carton box or not on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools not included.
DO NOT use power tools to construct this product.
DO NOT tighten screw until fully assembled.
DO NOT over tighten screw or bolts.
DO NOT use this product if parts are missing, damage or worn.
DO NOT stand or sit on this table
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
Page 2 of 12 V1 6/18

Side Panel (L) (30 x 435 x 470mm)A 1
BSide Panel (R) (30 x 435 x 470mm) 1
CTop Panel (25 x 450 x 450mm) 1
DBottom Panel (30 x 434 x 360mm) 1
EFront Bar ( 15 x 80 x 360mm) 1
FDrawer Front (15 x 140 x 352mm) 1
GDrawer Side (L) (15 x 100 X 340mm) 1
HDrawer Side (R) (15 x 100 X 340mm) 1
IDrawer Back (15 x 100 X 305mm) 1
YBack Panel (3 x 390 X 423mm) 1
ZDrawer Bottom (2.5 x 334 X 314mm) 1
A
E
D
B
C
Y
Z
H
F
G
I
Page 3 of 12 V1 6/18

4x
a
CSK Screw
D4.7 x 38mm
5
3
12x
e
Nail Pin
(19mm)
1x
m
Allen Key
M4
1x
l
Handle
(64hole mm)
1x
j
Drawer Slide
(350mm)
1x
k
Drawer Slide
(350mm)
D8 x 30mm
b
Wood Dowel
8x
M5 x 29mm
c
Minifix Bolt
12x
M6 x 1/2mm
d
Tapping Handle
Screw
2x
D15 x 12mm
g
Minifix Cam
12x
M3.5 x 15mm
i
CsK Screw
4x
M6 x 9mm
h
Euro Screw
4x
5 x 8 x 13.5mm
Nail Leg
4x
f
Page 4 of 12 V1 6/18

STEP 1
8 x
b
Parts Required Qty
Panel (A) 1
Panel (B) 1
Panel (D) 1
Panel (E) 1
Parts Required Qty
Panel (G) 1
Panel (H) 1
b
bb
b
b
b
Page 5 of 12 V1 6/18