Bigassfans AirGo Misting System User manual

1. PREPARE PUMP 2. INSTALL BRACKET
3. INSTALL PUMP (AIRGO)
Bracket not needed for AirGo All Terrain.
3/8 in. Hex Bolt
3/8 in. Flat Washer
Save nuts for pump installation.
Quick Installation Guide
AirGo®Misting System
READ AND SAVE THESE INSTRUCTIONS
3/8 in. Nylock Nut
5/16-18 Nylock Nut

INSTALL PUMP (AIRGO ALL TERRAIN)
WWW.BIGASSFANS.COM © 2018 DELTA T LLC ALL RIGHTS RESERVED.
CAUTION: Do not operate misting pump without filter.
CAUTION: Do not plug fan into outlet on misting pump.
OPERATION
Water supply requirements:
15–60 PSI, 140°F (60°C) max
1. Turn o fan.
2. Plug in misting pump (20 A circuit).
3. Turn on water source.
4. Press red button on pump filter to purge air.
5. Flip Power switch to ON.
6. Press Start switch.
7. Turn on fan.
To stop misting, flip Power switch to OFF and turn o
water source.
Power
Switch
4. CONNECT HOSE 5. CONNECT WATER SOURCE
5/16-18 Nylock Nut
Start
Switch
Operating Instructions and Maintenance:
bigassfans.com/support
AIG-INST-214-ENG-01 REV A 09/06/18