BigPlanes CYMODEL JUKA 100 User manual

SAFETY PRECAUTIONS
This radio control model is not atoy!
SPECIFICATION
Wing Span:2540 mm (100 in)
22
Wing Area:117dm (1814sq.in)
Total Length: 2500 mm (98.5 in)
Radio : 4-5 channels,10-11 servos
Engine : 100cc gas engine
lFirst-time buildersshould seekadvice frompeople havingbuilding
experience inorder toassemble themodel correctlyand toproduce
its performanceto fullextent. ,
lAssemble thiskit onlyin placesout ofchildrens reach!
lTakeenough safetyprecautions priorto operatingthis model.
,
You areresponsible forthis modelsassembly andsafe operation!
lAlways keepthis instructionmanual readyat handfor quick
reference,even aftercompleting theassembly
lCould causeserious injuryor evendeath.
Warning!
JUKAJUKA
ALMOST - READY - TO - FLYALMOST - READY - TO - FLY
Before commencing assembly,please read these instructions thoroughly.
Instruction Manual

REQUIRED FOR OPERATION (Purchase separately)REQUIRED FOR OPERATION (Purchase separately)REQUIRED FOR OPERATION (Purchase separately)REQUIRED FOR OPERATION (Purchase separately)
TOOLS REQUIRED ( Purchase separately)TOOLS REQUIRED ( Purchase separately)TOOLS REQUIRED ( Purchase separately)TOOLS REQUIRED ( Purchase separately)
BEFOREYOUBEGINBEFOREYOUBEGINBEFOREYOUBEGINBEFOREYOUBEGIN
SharpHobbyKnife Phillips Screw Driver Awl
NeedleNosePliers Wire Cutters Scissors
Read through the manual before you begin ,so you will have an overall idea of what to do.
Check all parts .if you find any defective or missing parts .contact your local deater.
Symbols used throughout this instruction manual,comprise.
111
222
333
.
.
Warning!
!
Do not overlook this symbol.
Aminimum 4-5channel radio for airplanes (with 10-11servos).
And dry batteries.
CAUTION: Only use a minimum 4-5channel radio for
airplanes! (No other radio may be used!)
!
12 AA-size Batteries
Aminimum 4-5 channel
transmitter for airplanes.
For handing the radio properly.refer to its instruction manual.
Engine and Muffler
Purchase a propeller that
will match your engine
Silicone Tube Fuel Filter
required for engine starting Glow engine fuel only.
WARNING: Normal gasoline cannot
be used with glow engines.
!
Fuel Pump Plug Wrench
Glue
Instant glue
Epoxy Glue
Other equipment for enhancing
airplane operation & perormance
12VBattery (for starter)
Engine Starter
BBBB
20X10----22X10
22
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling.
Must be purchased
separately!
Pay close attention
here!
Drill holes with the specified
Diameter(here:2mm)
Assemble left and right
Sides the same way.
Apply instant glue
(CA glue,super glue).
Apply epoxy glue.
Cut off excess.
502
C.AC.A
LL
RR
AB2mm2mm
99
44
11
77
66
55
88
Model Airplaneengine:100ccgasengine
receiver
22
Battery (need 2)
33
Servo(need 10-11 servos )
remote control
Switch (need 2)
AA
Muffler
Muffler

!
3
2
Install the aileron
1
5
4
Main wing,put the aileron servo
line into the fuselage
33
Install the aileron servo
Checking the wing
Install the elevator
Accessory list for this page.
L
R
2mmX900mm wire2mmX900mm wire
The servo line
L
R
32X930mm tube32X930mm tube
- - - - - - - 1- - - - - - - 1
A, A
A= ,
A
L
R
2mmX370mm wire2mmX370mm wire
The servo must be purchase separatelyThe servo must be purchase separately
Bottom view
4X30 Screw
Rod adjuster
Connecting rod head
- - - - - 6
- - - - - 12
- - - - - 6
HORN
- - - - - 6
- - - - - 6
3X40mm screw
2X8mm screw
- - - - - 18
- - - - - 12
2.5X85mm rod
- - - 6
8mm nylon Nut
- - - - - 2
8mm Washer
- - - - - 2
4X30 Screw
Rod adjuster
Connecting rod head
- - - - - 6
- - - - - 12
- - - - - 6
HORN
- - - - - 6
- - - - - 6
3X40mm screw
2X8mm screw
- - - - - 18
- - - - - 12
2.5X85mm rod
- - - 6

Accessory list for this page.
Instal the elevator
3X14mm Screw
3mm washer
Install the elevator servo(means :1)
The servo must be purchase separatelyThe servo must be purchase separately
12X500mm tube12X500mm tube
3mm rubber band
- - - - - - 4
- - - - - - 4
- - - - - - 4
Instal the rudder
Horizontal/Vertical tail
M4 screw
2mmX500mm wire2mmX500mm wire
Securely glue together
,if coming off during flights.
You lose control of your airplane
which leads to accidents!
4X30 Screw
Rod adjuster
Connecting rod head
- - - - - 2
- - - - -4
- - - - - 2
HORN
- - - - - 2
- - - - - 2
3X40mm screw
2X10mm screw
- - - - - 6
- - - - - 4
2.5X85mm rod
- - - 2
- - - - - 1- - - - - 1
Install the rudder servo
L
R
Aluminium tube
Rod adjuster
Connecting rod head
2X8mm screw
- - - - - 4
- - - - - 4
- - - - - 4
Rod - - - - - 4
- - - - - 4
4mm nut - - - - - 2
1400mm Steel wire
- - - - - 2
4X120mm screw
- - - - - 1
!
8
710
99
44
6
Aluminium tube
Rod adjuster
Connecting rod head
2X8mm screw
- - - - - 4
- - - - - 2
- - - - - 4
Rod - - - - - 4
- - - - - 4
4mm nut - - - - - 2
1400mm Steel wire
- - - - - 2
4X120mm screw
- - - - - 1
4X30 Screw
Rod adjuster
Connecting rod head
- - - - - 2
- - - - -4
- - - - - 2
HORN
- - - - - 2
- - - - - 2
3X40mm screw
2X10mm screw
- - - - - 6
- - - - - 4
2.5X85mm rod
- - - 2
3X14mm Screw
3mm washer
3mm rubber band
- - - - - - 4
- - - - - - 4
- - - - - - 4
4mm washer
- - - - - - 2
4mm washer
- - - - - - 2

!
13
12 15
14
11
55
Accessory list for this page.
8mm axle
8mm nut
5.2mm collar
- - - - 2
- - - - 2
- - - - 2
5X25mm screw
- - - - 4
5mm washer
- - - - 4
3X3mm screw
- - - - 2
Install the rudder servo
Install the main landing gear
Install the tail wheel
76mm wheel
- - - - 2
3X20mm screw
- - - - 4
3mm Lock nut
- - - - 4
- - - - 1
- - - - 2
3.2mm Collar
3.2mm Nylon Collar
3X3mm Screw
- - - - 4
- - - - 3
M6 Nut
M6X9 screw
- - - - 1
- - - - 1
3.2mm Collar
- - - - 1
M3X20 Tp screw
45mm Wheel
- - - - 1
1.8X200mm rod
Linkage Stopper
- - - - 1
- - - - 1
Install the tail wheel
502
C.AC.A
- - - - 1
- - - - 2
3.2mm Collar
3.2mm Nylon Collar
3X3mm Screw
- - - - 6
- - - - 3
M6 Nut M6X9 screw
- - - - 1 - - - - 1
3.2mm Collar
- - - - 1
M3X20 Tp screw
45mm Wheel
- - - - 1
1.8X200mm rod
Linkage Stopper
- - - - 1
- - - - 1
8mm axle
8mm nut
5.2mm collar
- - - - 2
- - - - 2
- - - - 2
90mm wheel
- - - - 2
3X20mm screw - - - - 4
3mm Lock nut - - - - 4
5X25mm screw - - - - 4
5mm washer - - - - 4
Install the main landing gear

!
18
17 20
19
66
16
Accessory list for this page.
Engine:100cc gasEngine:100cc gas
Install the engine:
50cc gas engine
Assembly of the full tank
After confirmingthe
position(see frontof
fuel tank).
Insert and tighten
the screw.
1.8X350mm Rod
Linkage Stopper
2mm Nut
- - - - 1- - - - 1
- - - - 1- - - - 1
3X3mm Screw
- - - - 1- - - - 1
- - - - 1- - - - 1
Throttle servoThrottle servo Fuel tankFuel tank
Radio Equipment
Install the canopy
Assembly the cowling
Battery/Ignition
Receiver/BatteryReceiver/Battery
3X14mm Screw 3mm washer 3mm rubber band
- - - - - - 5 - - - - - - 5 - - - - - - 5
SpinnerSpinner
PropellerPropeller
3X25mm Screw 3mm washer
3mm rubber band
- - - - - - 4 - - - - - - 4
- - - - - - 4
2.3X10mm Tp screw
- - - - - - 8
Fuel supply line
Fuel pipe Air pressure line
3X14mm Screw
- - - - - - 5
Engine:100cc gasEngine:100cc gas
1.8X350mm Rod
Linkage Stopper
2mm Nut
- - - - 1
- - - - 1
3X3mm Screw
- - - - 1
- - - - 1
3X25mm Screw
3mm washer
3mm rubber band
- - - - - - 4
- - - - - - 9
- - - - - - 9
2.3X10mm Tp screw
- - - - - - 8

23
22 24
Side view
ELEVATOR
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
Top view
21
AILERON
Adjustment.
Top view
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
77
Adjustment.
Never fly before checking the Cg s required position.
In order to obtain the CG specified ,reposition the
receiver and battery.
NEVER fly the model
without well balancing.
Warning!
!
CG
Side view
Rudder
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
Top view
175-185mm175-185mm
Adjustment
Side view
Adjustment.
45
45
45
45
45
45