Billebro Mini Wash 18 User manual

MINI WASH 18
MINI WASH 18 1
Mini Wash 18
User Manual

MINI WASH 18
MINI WASH 18 2
Getting to know the device
LEDs 18*3W RGB
DMX Control 5/12 Channel
Control Connections 3 Pin Female XLR sockets,3 Pin Male XLR sockets
Power Requirement 115V-230V, 50/60Hz
Power Cunsumption 90 Watts
Dimensions 225mm*225mm*270mm
Net Weight 4.2Kg
Clolor Options
The Unit offers a range of 16 preset colors. These can be
individually selected with DMX control and feature in Auto Run

MINI WASH 18
MINI WASH 18 14
 Power connection to the product via a 110-230 power
switch,please vertify your local vothage.
 To maintain the Manufacture Waaranty,only attach
authoorised accessories ans external devices.This includes
cables,connectors and other electrical and /or mechanical
device.
 Unplug the product from the mains during lighting storms or
periods of maina fluctuations. If the product is goging to be
unused for long periods,unplug the main.
Product Quality& Compliance
 Products from us meet all required safety standards in force
at the time of manufacturer and are fully compliant with
them.
 Uppacking & Inspection
 Inspect the packing before opening,If the packing appears
to have sustained significant damage,please take extra
care before using the product. If you are in any
dount,counsult a suitably qualified professional.
 If you suspect the product has been damaged,do not use it.
Return it to your original supplier without delay.
 Keep all packaging in a safe place for storage or transport
in future.
Thanks for choosing our products and your kind
cooperations.
MINI WASH 18
MINI WASH 18 3
and Sound Activated modes.
Color Preset
White
Red
Dark Green
Dark Blue
Light Blue
Magenta
Yellow
Purple
Orange
Light Green
Pink
Brown
Gold
Crimson
Violet
Dark Purple
Operating Modes
Six distinct operating modes,many with sub-modes,are
supported by the unit. To select use the “MODE/ESC” button to
enter the menu.”UP” and “DOWN” button choose from values
availabale with the “ENTER” button confirning any selection.
Affter a few seconds,the LED Display will blank during operation
until another button is pressed.

MINI WASH 18
MINI WASH 18 4
1- In-built Program Mode
Setting Maximum Pan Angles
To select, use the “MODE/ESC” button and choose
“PA18”,PA36”,or” PA54”. “UP” and “Down” buttons cycle
between all available Pan Angles.Press the “ENTER” button to
confirm the chosen selection.
LED Display Maximum Pan
PA18 18°
PA36 36°
PA54 54°
Setting Maximum Titl Angles
To select, use the “MODE/ESC” button and choose “t.9”,t.18”,or”
t.27”. “UP” and “Down” buttons cycle between all available Tilt
Angles.Press the “ENTER” button to confirm the chosen
selection
LED Display Maximum Pan
t.9 9°
t.18 18°
t.27 27°
1- in-built Program Mode(continued)
As the unit can be mounted hung underneath trussing,or can sit
equally well on a flat surface,pan,tilt and LED display settings
can be reversed to provide correct coverage and ease of use.
Setting Reversed or Normal Pan
To select,use the “MODE/ESC” button and choose “Pan”(normal)
MINI WASH 18
MINI WASH 18 13
and for your own safety.
 There are no user replacement parts inside the product. Do
not open the product for any reason.This will invalidate your
Manufacturer Warranty and may inpair the safety features
of the product.
 Do not expose this poduct to moisure,rain or other fluids.
 Do not use this prodduct near water or other fluids.
 Do not use the product if you supect it has been damaged
in any way,including being dropped,is malfunctioning,or has
been exposed to liquids or moisture. The unit must be
repaired by an authorised service centre only. Mabufacturer
Warranty is void if unit is opened or adapted in any way.
Operator satety may be compromised if this product is not
operated and maintained in accordance with the details
contained in this Owner Handbook.
 This appliance must be earthed,Do not remove the earth
connection in th eplug or any other location-it is essntial for
user safety.
 Be aware that products are mains powered and may be
capable of producing high votages from its uouputs and has
mains votages inside the cabinet.
Product installation,Use& maintenance
 Keep this Owner handbook safe for future reference.
 Clean the product with a clean and dry,non-abrasive cloth.
Do not use solvents or liquids to clean the product.
 To prevent overheating,do not obstruct any ventilation
opening,fan cover or vent. Do not install any source of heat
such as radiators,heaters,other heat producing items such
as cmplifiers,power units etc.

MINI WASH 18
MINI WASH 18 12
For your safety
 Follow all instructions to maintain Manufacturer Warranty
MINI WASH 18
MINI WASH 18 5
or ‘rPAn”(reversed). “UP” and “DOWN|” buttons cycle between
the two settings. Press the “ENTER” button to confirm the
choesen selection
Setting Reversed or Normal Tilt
To select,use the “MODE/ESC” button and choose “t.L”(normal)
or “rt.l”(reversed). “UP” and “DOWN|” buttons cycle between the
two settings. Press the “ENTER” button to confirm the choesen
selection
Setting Reversed or Normal LED Display
To select,use the “MODE/ESC” button and choose “d.s”(normal)
or :rd.s”(reversed). “UP” and “DOWN|” buttons cycle between
the two settings. Press the “ENTER” button to confirm the
choesen selection
2- Auto Run Mode
One of two Auto Run Sub-modes can be selected with a choice
of preset speeds. This mode enables the unit to act as a Master
to other Slave units.
Choosing Auto Run Sub-modes
To select use the “MODE/ESC” button to show “NAFA” or
“NASL”. “UP” and “DOWN” buttons change between the two
initial options. With the appropriated option selected ,use
“ENTER” to confrim and the LED Display with change
to :Fast”(fast) or “SloU”(slow). The unit will then run at the
choese speed
Initial LED Display Second LED Disply
Sub-mode
NAFA Fast Fast Auto Run

MINI WASH 18
MINI WASH 18 6
NAFL SloU Slow Auto Run
3- Sound Activated Mode
The unit responds to sounds picked up by the built in
microphone to create a light show. Each sound picked up
makes changes to color shown and position of the effects. This
mode enables the unit to act a Master to other Slave units
Choosing Sound Activated Mode
To select,use the MODE/ESC”button and choose”NStS”. When
the “ENTER” button is pressed the LED Display changes to
“SrUn” and the unit enters Sound Activated Mode.
Initial LED Display Second LED Disply
Sub-mode
NStS SrUn Sound Activated
4- Slave Mode
Up-to 32 units can be daisy chained together with one single
unit acting as Master and all other linked units as Slaves. Slave
units will all run in synch with the master unit without the need
for an additional controller. Connections can be made using
standarad DMX control cables with the Master unit running in
Auto Run or Sound Activated Modes and placed at the start of
the chain.
Choosing Slave Mode
To select, use the “MODE/ESC” button and choose “SLAu”.
When the “ENTER” button is pressed the LED display changes
to “Son” and the unit will be slaved to control signals coming
from a Master unit.
MINI WASH 18
MINI WASH 18 11

MINI WASH 18
MINI WASH 18 10
DMX 12 Channel Control setting
MINI WASH 18
MINI WASH 18 7
5- Service Modes
After major configuration changes it may be necessary to reboot
or reset the unit.
Resetting the Unit
To select,use the “MODE/ESC” button and choose
“rEST”(restore). Press “ENTER” to confirm. The unit powers
itself down and then on again for a few seconds. During this
time the LED display will scroll””rEST” from left to right,after
which normal operation recommences.
Restoring factory defaults
To select,use the “MODE/ESC” button and choose”LoAD”(load).
Press “ENTER” to confirm. The LED display will change
to”d001” to confirm a factory reset has been completed.
Powering the unit initially
During the warm up the unit will auto test itself for a few seconds.
During this time the led display will scroll”rEST” from left to right.
The unit then commences operation normally.
6- DMX Modes
The unit supports 5 and 12 channel DMX Sub-modes frim a
standard desk. When a suitable DMX connection is
made,the”decimal piont” in “d.001” will flash.
Setting DMX Addresses
Use the “MODE/ESC” button to display”d001”, “UP”and

MINI WASH 18
MINI WASH 18 8
“DOWN” buttons allows individual DMX addresses to be set
from “d001” to”d512”
Choosing between DMX Sub-modes
The LED display shows the chosen control mode when the
“MODE” button is pressed. Use “UP” and “DOWN” buttons to
choose the appropriate DMX control Mode.
LED Disply DMX Sub-mode
5CH 5 Channel
12Ch 12 Channel
MINI WASH 18
MINI WASH 18 9