involight LED RX350 User manual

DMX LED 4-eye laser manual
Our DMX LED 4-eye laser effect light offers many possibilities to achieve very nice laser effects
which you want. It is specially designed for the stages, disco, night clubs etc. Please read the manual
before operation.
A. SPECIFICATION:
1. Weight: 5.5kg
2. size: 930mm*150mm*95mm
3. Power input: AC 90V-240V,50/60HZ
4. Power consumption: 40W
5. LEDs: 256 (R:64, G:64, B:64, W:32, Y:32)ultra bright 5mm
6. Beam angle: 15 degree
7. 3 pin female XLR socket and 3 pin male XLR socket
8. Built-in microphone
9. Two kinds of sound active modes.
10. Two kinds of DMX modes
11. Built-in programs, Auto running, Sound active, Slave mode, DMX mode, Select static color
12. 4-button LED display for easier operation.
13. Recall last operation when power is on again.
14. Auto running loops selectable.
B.OPERATION:
After power on, Press “MODE”button to activate the main menu: Built-in programs mode, Auto running mode,
DMX mode, Slave mode, Sound active mode, Select static color
“SETUP”is to set the relative specification for current mode.
“UP”is to add the value of current specification.
“DOWN”is to decrease the value of current specification.
Built-in programs-- running one of 42 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Sound mode-- running by sound - activated
Select static color—to have static color effects from this function.

1. built-in programs mode
With DMX LED 4-eye laser, yon can select 42 different built-in Programs.
Press ”MODE” button, when it shows: (Pr01), it means you can select the 26 built-in programs by pressing
“UP” “DOWN”.
When (Pr01), press “SETUP”button for the first time, it shows: , you can set the speed by pressing
“UP” “DOWN”.
If press “SETUP”button for the second time, it shows: , you can set the flash frequency by pressing “UP”
“DOWN”.
SP- speed 00-100
FS—flash frequency from 00-99
2. Auto run mode
You can press “MODE”button to select auto run mode, it shows , then it will run the built-in programs
automatically.
Press “SETUP”button for the first time, then it shows: . Then you can select loops numbers by pressing
“UP”“DOWN”. press“SETUP”button for the second time, it shows: , you can set the speed by pressing
“UP” “DOWN”. If press “SETUP”button for the second time, it shows: , you can set the flash
frequency by pressing “UP” “DOWN”.
3. DMX mode
You can control the devices individually via your DMX-controller.
Press“MODE”button, when it is , it is DMX mode. You can set DMX value by pressing“UP”“DOWN”.
If press “SETUP”button, it shows: d-p1 or d-p2 , You can choose different DMX mode by
pressing “UP” “DOWN”.
DMX mode1：d-P1
CH1 CH2 CH3
NO. DMX value FUNCTION SPEED FLASH
10 OFF NO USE NO USE
21—5 PROGRAM01
SPEED
0--255
FASH
0--255
36—11 PROGRAM02
412—17 PROGRAM03
5 18—23 PROGRAM04
6 24—29 PROGRAM05
7 30—35 PROGRAM06
8 36—41 PROGRAM07
9 42—47 PROGRAM08
10 48—53 PROGRAM09
11 54—59 PROGRAM10
12 60—65 PROGRAM11
13 66—71 PROGRAM12
14 72—77 PROGRAM13
SPEED
0--255
FASH
0--255
NO USE
15 78—83 PROGRAM14
16 84—89 PROGRAM15
17 90—95 PROGRAM16
18 96—101 PROGRAM17
19 102—107 PROGRAM18
20 108—113 PROGRAM19
21 114--119 PROGRAM20
22 120—125 PROGRAM21
23 126—131 PROGRAM22

24 132—137 PROGRAM23
25 138—143 PROGRAM24
26 144—149 PROGRAM25
27 150—155 PROGRAM26
28 156—161 PROGRAM27
29 162—167 PROGRAM28
30 168—173 PROGRAM29
31 174—179 PROGRAM30
32 180—185 PROGRAM31
33 186—191 PROGRAM32
34 192—197 PROGRAM33
35 198—203 PROGRAM34
36 204—209 PROGRAM35
37 210—215 PROGRAM36
38 216—221 PROGRAM37
39 222—227 PROGRAM38
40 228—233 PROGRAM39
41 234—239 PROGRAM40
42 240—245 PROGRAM41
43 246—251 PROGRAM42
44 252—255 Sensitivity 0--31 NO USE
DMX mode2：d-P2
CH1 CH2
NO. DMX
Value FUNCTION FLASH
10 OFF NO USE
21—22 R
FASH
0--255
323—45 G
4 46—68 B
5 69—91 Y
692—114 W
7115—137 YW
8 138—160 RG
9 161—183 RB
10 184—206 GB
11 207—229 RGB
13 230—252 RGBYW
14 253--255 Sound Mode Sensitivity
0--255
4. Slave mode
press “MODE”button to select to run the slave mode.
5. Sound mode
press “MODE” button to select to be run, press“SETUP”button，it shows (activated one time,
running one step) which is better for rock music or (activated one time, running for 5 seconds) which is
better for soft music, press “UP”or “DOWN”buttons for three seconds until it switches to another sound mode.
Adjust the sensitivity by pressing “UP” “DOWN”buttons.
Sensitivity: SO01-SO31

6. Select Static color
press “MODE”button to select , there are 12 built-in static color effects. You can select different effect by
pressing “UP” and “DOWN” buttons.