Chauvet Professional ROGUE R3 SPOT User manual

USER MANUAL

TABLE OF CONTENTS
Rogue R3 Spot User Manual Rev. 2
TOC 1 of 2
TABLE OF CONTENTS
1. Edition Notes .............................................................................. 1
Trademarks ................................................................................................... 1
Copyright Notice............................................................................................ 1
Document Printing......................................................................................... 1
Intended Audience ........................................................................................ 1
Disclaimer ..................................................................................................... 1
Document Revision....................................................................................... 1
2. Before You Begin ....................................................................... 2
What Is Included ........................................................................................... 2
Claims ........................................................................................................... 2
Manual Conventions ..................................................................................... 2
Symbols ........................................................................................................ 2
Expected LED Lifespan................................................................................. 2
Safety Notes.................................................................................................. 3
Operation ...................................................................................................... 3
3. Introduction ................................................................................ 4
Description .................................................................................................... 4
Features........................................................................................................ 4
Product Overview.......................................................................................... 4
Product Dimensions ...................................................................................... 5
4. Setup ........................................................................................... 6
AC Power...................................................................................................... 6
Power Linking................................................................................................ 6
DMX Linking.................................................................................................. 6
DMX Personalities.......................................................................................................... 6
Remote Device Management (RDM) ............................................................ 7
Mounting ....................................................................................................... 7
Orientation...................................................................................................................... 7
Rigging ........................................................................................................................... 7
Procedure....................................................................................................................... 7
Gobo Wheels............................................................................................... 8
Color 1............................................................................................................................ 9
Color 2............................................................................................................................ 9
5. Operation ................................................................................... 10
Control Panel Operation ...............................................................................10
Control Options ............................................................................................10
Programming ................................................................................................10
Menu Map ..................................................................................................11
DMX Value ...................................................................................................13
Address ........................................................................................................20
Run Mode .....................................................................................................20
DMX Personality ..........................................................................................20
Auto Test ....................................................................................................20
Manual Test ................................................................................................20
Setup.............................................................................................................21
Tilt Reverse.................................................................................................21
Screen Reverse ...........................................................................................21
Pan Angle ...................................................................................................21
Tilt Angle ....................................................................................................21

Rogue R3 Spot User Manual Rev. 2
TABLE OF CONTENTS
TOC 2 of 2
Pan and Tilt Blackout ....................................................................................21
Color Movement Blackout ..............................................................................21
Gobo Movement Blackout .............................................................................21
Pulse Width Modulation ................................................................................21
Reset Function ............................................................................................22
Factory Reset Function .................................................................................22
System Information ......................................................................................22
Offset Mode ..................................................................................................22
6. Technical Information ............................................................... 24
Product Maintenance ...................................................................................24
7. Technical Specifications .......................................................... 25
Returns ........................................................................................... 26
Contact Us ..................................................................................... 27

Page 1 of 27
EDITION NOTES
Rogue R3 Spot User Manual Rev. 2
1. Edition Notes
The Rogue R3 Spot User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the Rogue R3 Spot as of the release date of this edition.
Trademarks
CHAUVET, the Chauvet logo and Rogue R3 Spot are registered trademarks or trademarks of Chauvet &
Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company
and product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2020 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com
Document Revision
This Rogue R3 Spot User Manual is the 2nd edition of this document. Go to www.chauvetprofessional.com
for the latest version.

Page 2 of 27
Rogue R3 Spot User Manual Rev. 2
BEFORE YOU BEGIN
2. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
Expected LED Lifespan
LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.
• Rogue R3 Spot
• Neutrik® powerCON® power cord
• 2 Omega brackets
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Any reference to data or power connections in this manual assumes the use of
Seetronic IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
!
!

Page 3 of 27
BEFORE YOU BEGIN
Rogue R3 Spot User Manual Rev. 2
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• The product is intended for professional use only.
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to
rain or moisture. (IP20).
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm,
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to the product when operating.
• Always carry this product by the handles. Do not carry from the head.
• When hanging this product, always secure to a fastening device using a safety cable.
• The product should be positioned so that prolonged staring into it at a distance closer than 2.3 m is
not expected.
Power and Wiring
• Always make sure you are connecting the product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• Never connect the product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
• If the external flexible cable or cord of this product is damaged, it shall be replaced with a special
cable or cord exclusively available from the manufacturer or its service agent.
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• Do not aim this product toward the sun. The lenses could concentrate the solar energy and cause internal
overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• In the event of a serious operation problem, stop using this product immediately!
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.
!

Page 4 of 27
Rogue R3 Spot User Manual Rev. 2
INTRODUCTION
3. Introduction
Description
Rogue R3 Spot delivers intense output, crisp optics, and sharp focus, and maintains a value proposition
designed to maximize ROI. This moving spot has a bright 300 W LED light engine that produces an even
field of light, a rotating and a static gobos, (2) 8-position and split-color-enabled color wheels, and three-
facet prism to create stunning looks. A quick moving zoom range of 13°–37° adds to its flexibility of use by
giving the Rogue R3 Spot the ability to cover large areas.
Features
• Intense 300 W LED light engine for bold beams
• Zoom angle of 13° to 37° to cover stages and surfaces from a distance
• Perfect gobo morphing between gobo wheels
• Two color wheels with 7 colors, split color ability, and continuous variable speed scrolling
• Iris, 3-facet prism, and frost for beam control
• 16-bit LED dimming for fade control
•Neutrik
®powerCON®power input/output connections for power linking
• 3- and 5-pin DMX input/output connections
• RDM enabled for remote addressing and trouble shooting
• Selectable PWM settings to maintain flicker-free operation on camera
• Simple and complex DMX channel profiles for programming versatility
Product Overview
Menu
buttons
Power
in/out
Fuse
Handles
DMX
out/in
Display
panel
Power switch

Page 5 of 27
INTRODUCTION
Rogue R3 Spot User Manual Rev. 2
Product Dimensions
14.2 in
360 mm
23.7
601 mm
11 in
282 mm
14.7 in
373mm

Page 6 of 27
Rogue R3 Spot User Manual Rev. 2
SETUP
4. Setup
AC Power
Each Rogue R3 Spot has an auto-ranging power supply that works with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each Rogue R3 Spot, refer to the label
affixed to the product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.
.
AC Plug
The Rogue R3 Spot comes with a power input cord terminated with a Neutrik® powerCON® connector on
one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your
product has no plug, or if you need the change the plug, use the table below to wire the new plug.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
Power Linking
The product supports power linking. You can power link up to 3 products at 120 V; up to 5 at 208 V; or up
to 6 at 230 V. This product comes with a power input cord. Power linking cables are available from Chauvet
for purchase.
DMX Linking
You can link the Rogue R3 Spot to a DMX controller using a 3- or 5-pin DMX connection. If using other
DMX-compatible products with this product, you can control each individually with a single DMX controller.
DMX Personalities
The Rogue R3 Spot uses a 3- or 5-pin DMX data connection for its 19-channel or 25-channel DMX
personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Rogue R3 Spot to work in these
personalities.
• The DMX Values section provides detailed information regarding the DMX personalities.
• Always connect the product to a protected circuit (a circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a
DMX controller, download the DMX Primer from the Chauvet website:
www.chauvetprofessional.com.
!

Page 7 of 27
SETUP
Rogue R3 Spot User Manual Rev. 2
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Rogue R3 Spot supports RDM protocol
that allows feedback to make changes to menu map options.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Procedure
The Rogue R3 Spot comes with a preinstalled mounting surface to which you will be able to attach the
included omega bracket. Make sure the clamps are capable of supporting the weight of this product. Use
at least 2 mounting points per product. In addition, use a safety cable to link the product to the structure.
For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
Omega bracket
Safety cable
(such as CH-05 from
Chauvet)
Mounting clamp
(such as CLP-15 or CLP-15N
from Chauvet)
Floor Mounting
Overhead Mounting

Page 8 of 27
Rogue R3 Spot User Manual Rev. 2
SETUP
Gobo Wheels
Gobo Wheel Gobo # Description Gobo Wheel Gobo # Description
Static gobo
wheel
1Dots breakup
Rotating
gobo wheel
1Tribal breakup
2Bricks 2Shattered
3Triangle rays 3Stickmen
4Grouped ovals 4Linear ovals
5Triangle breakup 5Laser triangle
6Foliage breakup 6Line
7Circle dot 7Thatched breakup
8Mosaic breakup
Static Gobo Wheel Rotating Gobo Wheel

Page 9 of 27
SETUP
Rogue R3 Spot User Manual Rev. 2
Color 1
Color 2

Page 10 of 27
Rogue R3 Spot User Manual Rev. 2
OPERATION
5. Operation
Control Panel Operation
Control Options
Set the Rogue R3 Spot starting address in the 001-512 DMX range. This enables control of up to 20
products in the 25-channel 25 personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the
current function
<UP> Navigates upward through the menu list or increases the numeric value when in a
function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a
function

Page 11 of 27
OPERATION
Rogue R3 Spot User Manual Rev. 2
Menu Map
Main Level Programming Levels Description
Address 001-512 Sets the DMX starting address
Running Mode
DMX 25CH Selects the DMX mode
19CH
Auto Test Runs the product’s test sequence
Manual Test
Pan
000–255 Allows manual control of all settings from
the control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Color 1
Color 2
Gobo
Gobo Rot
Gobo 2
Focus
Zoom
Prism
Prism Rotate
Iris
Frost
P/T Macro
P/T Macro
Speed
Special
Function
Setup
Pan Reverse YES Reverse pan operation
NO Normal pan operation
Tilt Reverse YES Reverse tilt operation
NO Normal tilt operation
Screen Reverse YES Normal control screen view
NO Rotates control screen view 180°
Pan Angle
540 Selects the 540° pan angle range
360 Selects the 360° pan angle range
180 Selects the 180° pan angle range
Tilt Angle
250 Selects the 250° tilt angle range
180 Selects the 180° tilt angle range
90 Selects the 90° tilt angle range
BL.O.P/T Move YES Defines the pan/tilt move-in-black delay
NO
BL.O.Color Move YES Defines the color change move-in-black
delay
NO
BL.O.Gobo Move YES Defines the gobo change move-in-black
delay
NO
PWM Option
600Hz
Selects the PWM output frequency
1200Hz
2000Hz
4000Hz
6000Hz
15KHz

Page 12 of 27
Rogue R3 Spot User Manual Rev. 2
OPERATION
Setup
Reset Function
Pan/Tilt YES Resets pan/tilt functions to the home
position
NO
Iris/Prism YES Resets iris and prism functions to the
home position
NO
Color YES Resets all color function to the home
position
NO
Gobo/
Gobo Rot.
YES Resets all gobo and gobo rotate functions
to the home position
NO
Frost YES Resets the frost functions to the home
position
NO
All YES Resets all functions to the home position
NO
Factory Settings YES Reverts the product back to the original
factory settings
NO
Sys Info
Ver Displays the software version
Running Mode Displays the current running mode
DMX Address Displays the current DMX address
Temperature Displays the product’s temperature in
Celsius
UID Shows product UID
Main Level Programming Levels Description

Page 13 of 27
OPERATION
Rogue R3 Spot User Manual Rev. 2
DMX Values
25CH
Channel Function Value Percent/Setting
1Pan 000 255 0-100%
2Finepan 000 255 Fine control (16-bit)
3Tilt 000 255 0-100%
4 Fine tilt 000 255 Fine control (16-bit)
5 Pan/tilt speed 000 255 0-100%
6 Dimmer 000 255 0-100%
7 Fine dimmer 000 255 Fine control (16-bit)
8Strobe
000 003 Off
004 007 On
008 076 Synchronizing strobe, slow to fast
077 145 Pulse strobe, slow to fast
146 215 Random strobe, slow to fast
216 255 On
9 Color 1
000 007 White
008 015 Color 1
016 023 Color 2
024 031 Color 3
032 039 Color 4
040 047 Color 5
048 055 Color 6
056 063 Color 7
064 071 White + Color 1
072 079 Color 1 + Color 2
080 087 Color 2 + Color 3
088 095 Color 3 + Color 4
096 103 Color 4 + Color 5
104 111 Color 5 + Color 6
112 119 Color 6 + Color 7
120 127 Color 7 + White
128 191 Clockwise color scroll, slow to fast
192 255 Counterclockwise color scroll, slow to fast
10 Color 2
000 007 White
008 015 Color 1
016 023 Color 2
024 031 Color 3
032 039 Color 4
040 047 Color 5
048 055 Color 6
056 063 Color 7
064 071 White + Color 1
072 079 Color 1 + Color 2
080 087 Color 2 + Color 3
088 095 Color 3 + Color 4
096 103 Color 4 + Color 5
104 111 Color 5 + Color 6
112 119 Color 6 + Color 7
120 127 Color 7 + White
128 191 Clockwise color scroll, slow to fast
192 255 Counterclockwise color scroll, slow to fast

Page 14 of 27
Rogue R3 Spot User Manual Rev. 2
OPERATION
11
Rotating gobo
wheel
(see Gobo Wheels)
000 007 Open
008 015 Gobo 1 (tribal breakup)
016 023 Gobo 2 (shattered)
024 031 Gobo 3 (stickmen)
032 039 Gobo 4 (linear ovals)
040 047 Gobo 5 (laser triangle)
048 055 Gobo 6 (line)
056 063 Gobo 7 (thatched breakup)
064 071 Gobo 1 shaking, slow to fast
072 079 Gobo 2 shaking, slow to fast
080 087 Gobo 3 shaking, slow to fast
088 095 Gobo 4 shaking, slow to fast
096 103 Gobo 5 shaking, slow to fast
104 111 Gobo 6 shaking, slow to fast
112 119 Gobo 7 shaking, slow to fast
120 127 Open
128 191 Clockwise scroll, slow to fast
192 255 Counterclockwise scroll, slow to fast
12 Gobo rotation
000 063 Rotating gobo index
064 147 Clockwise rotation, slow to fast
148 191 Counterclockwise rotation, slow to fast
192 255 Bounce effect
13 Static gobo wheel
(see Gobo Wheels)
000 006 Open
007 013 Gobo 1 (dots breakup)
014 020 Gobo 2 (bricks)
021 027 Gobo 3 (triangle rays)
028 034 Gobo 4 (grouped ovals)
035 041 Gobo 5 (triangle breakup)
042 048 Gobo 6 (foliage breakup)
049 055 Gobo 7 (circle dot)
056 063 Gobo 8 (mosaic breakup)
064 071 Gobo 1 shaking, slow to fast
072 079 Gobo 2 shaking, slow to fast
080 085 Gobo 3 shaking, slow to fast
086 092 Gobo 4 shaking, slow to fast
093 099 Gobo 5 shaking, slow to fast
100 106 Gobo 6 shaking, slow to fast
107 113 Gobo 7 shaking, slow to fast
114 120 Gobo 8 shaking, slow to fast
121 127 Open
128 191 Clockwise scroll, slow to fast
192 255 Counterclockwise scroll, slow to fast
14 Focus 000 255 0-100%
15 Fine focus 000 255 Fine control (16-bit)
Channel Function Value Percent/Setting

Page 15 of 27
OPERATION
Rogue R3 Spot User Manual Rev. 2
16 Auto focus
000 000 No function
001 012 5 meters (static gobo wheel)
013 024 6 meters (static gobo wheel)
025 036 7 meters (static gobo wheel)
037 048 8 meters (static gobo wheel)
049 060 9 meters (static gobo wheel)
061 072 10 meters (static gobo wheel)
073 084 15 meters (static gobo wheel)
085 100 20 meters (static gobo wheel)
101 127 Auto focus (static gobo wheel)
128 139 5 meters (rotating gobo wheel)
140 151 6 meters (rotating gobo wheel)
152 163 7 meters (rotating gobo wheel)
164 175 8 meters (rotating gobo wheel)
176 187 9 meters (rotating gobo wheel)
188 199 10 meters (rotating gobo wheel)
200 211 15 meters (rotating gobo wheel)
212 227 20 meters (rotating gobo wheel)
228 191 Auto focus (rotating gobo wheel)
17 Zoom 192 255 Counterclockwise scroll, slow to fast
18 Fine zoom 000 255 Fine Control (16-bit)
19 Prism 000 004 No function
005 255 Prism effect
20 Rotating prism
000 127 Prism index
128 189 Clockwise rotation, fast to slow
190 193 Hold
194 255 Counterclockwise rotation, slow to fast
21 Iris
000 063 Large to small
064 127 Auto change, slow to fast
128 191 Slow zoom out, fast zoom in (slow to fast)
192 255 Slow zoom in, fast zoom out (slow to fast)
22 Frost 000 004 No function
005 255 Frost effect
Channel Function Value Percent/Setting

Page 16 of 27
Rogue R3 Spot User Manual Rev. 2
OPERATION
23 Auto program
000 007 Auto program 1
008 015 Auto program 2
016 023 Auto program 3
024 031 Auto program 4
032 039 Auto program 5
040 047 Auto program 6
048 055 Auto program 7
056 063 Auto program 8
064 071 Auto program 9
072 079 Auto program 10
080 087 Auto program 11
088 095 Auto program 12
096 103 Auto program 13
104 111 Auto program 14
112 119 Auto program 15
120 127 Auto program 16
128 135 Auto program 17
136 143 Auto program 18
144 151 Auto program 19
152 159 Auto program 20
160 167 Auto program 21
168 175 Auto program 22
176 183 Auto program 23
184 191 Auto program 24
192 199 Auto program 25
200 207 Auto program 26
208 215 Auto program 27
216 223 Auto program 28
224 231 Auto program 29
232 239 Auto program 30
240 255 Auto program 31
24 Auto speed 000 255 Slow to fast
25 Control
000 007 No function
008 015 Blackout during pan/tilt
016 023 Blackout while color wheel is moving
024 031 Blackout while gobo wheel is moving
032 039 Blackout while pan/tilt/moving color wheel
040 047 Blackout while pan/tilt/moving gobo wheel
048 055
Blackout while pan/tilt/moving color wheel/moving gobo wheel
056 095 No function
096 103 Pan reset
104 111 Tilt reset
112 119 Color reset
120 127 Gobo reset
128 135 No function
136 143 Prism reset
144 151 No function
152 159 All reset
160 167 Iris reset
168 175 Frost reset
176 183 Zoom reset
184 255 No function
Channel Function Value Percent/Setting

Page 17 of 27
OPERATION
Rogue R3 Spot User Manual Rev. 2
19CH
Channel Function Value Percent/Setting
1Pan 000 255 0-100%
2Finepan 000 255 Fine control (16-bit)
3Tilt 000 255 0-100%
4 Fine tilt 000 255 Fine control (16-bit)
5 Pan/tilt speed 000 255 0-100%
6 Dimmer 000 255 0-100%
7Strobe
000 003 Off
004 007 On
008 076 Synchronizing strobe, slow to fast
077 145 Pulse strobe, slow to fast
146 215 Random strobe, slow to fast
216 255 On
8 Color 1
000 007 White
008 015 Color 1
016 023 Color 2
024 031 Color 3
032 039 Color 4
040 047 Color 5
048 055 Color 6
056 063 Color 7
064 071 White + Color 1
072 079 Color 1 + Color 2
080 087 Color 2 + Color 3
088 095 Color 3 + Color 4
096 103 Color 4 + Color 5
104 111 Color 5 + Color 6
112 119 Color 6 + Color 7
120 127 Color 7 + White
128 191 Clockwise color scroll, slow to fast
192 255 Counterclockwise color scroll, slow to fast
9 Color 2
000 007 White
008 015 Color 1
016 023 Color 2
024 031 Color 3
032 039 Color 4
040 047 Color 5
048 055 Color 6
056 063 Color 7
064 071 White + Color 1
072 079 Color 1 + Color 2
080 087 Color 2 + Color 3
088 095 Color 3 + Color 4
096 103 Color 4 + Color 5
104 111 Color 5 + Color 6
112 119 Color 6 + Color 7
120 127 Color 7 + White
128 191 Clockwise color scroll, slow to fast
192 255 Counterclockwise color scroll, slow to fast