Birko 1005004 User manual

Page 1
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
KITCHEN MIXER

Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Page 2
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Page 2
Contents
Read these instructions first......................................3
Installation.......................................................3
Safety..............................................................3
Operation...................................................................3
Selecting the correct mixing arm....................3
Assembly of the mixing arms.........................4
Mixing arm adjustment...................................5
Fitting the mixing bowl...................................5
Speed control.................................................6
Starting...........................................................6
Cleaning and Maintenance.......................................7
Specifications............................................................7
Parts list....................................................................8
Exploded diagram....................................................9
Wiring diagram........................................................10
Troubleshooting.......................................................11
End of life disposal..................................................11
Contact Details........................................................12

Page 3
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
The Birko Kitchen mixer is suitable for mixing a variety of foods and because of the robust construction, is
ideal for use in most commercial applications i.e. Cafe’s and Restaurants.
INSTALLATION:
-The Mixers must be connected to a standard 220-240V 10 amp general purpose outlet.
-Ensure the Mixer is placed on a secure, horizontal working surface
-The recommended height of the secure horizontal working surface should be between 650 - 750mm, with
spaces of 150mm front and back and with 300mm clearance on both sides.
SAFETY:
-The mixers are designed for indoor use only and must not be located in an area that may be cleaned by
a water jet.
-This appliance is not intended for use by persons (Including Children) with reduced physical, sensory or
mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance
by a person responsible for their safety.
-Children should be supervised to ensure they do not play with the appliance.
-If the power cord and plug is damaged it must be replaced by Birko or a qualified technician.
-When changing the mixing tools or when removing any parts, ensure the power is turned off.
-Do not operate the appliance with wet hands.
-After cleaning the mixer ensure it has been dried before use.
-Keep hands and fingers away from all moving parts.
-When the head is in the raised position or when the machine is mixing, ensure the handle ‘e’ (page4) is in
the vertical position.
-Do not operate the mixer without the safety guards in place
SELECTING THE CORRECT MIXING ARM:
It is important to select the correct mixing arm to match the type of food being mixed. The selection of the
wrong arm may cause damage to the mixer.
-The Hook shaped mixing arm (Item 39)* should be used for mixing large, weighty and doughy substances,
eg. in the preparation of breads and baking pasteries. This arm should be used only with a low speed set-
ting
-The paddle shaped mixing arm (Item 40)* is used for mixing bulky items that are not as heavy or sticky as
dough, eg. fruit mince, cake mix, meat dumplings and stuffing.This arm may be used with a low to medium
Read these instructions first
Operation
* Ref: Page 8 & 9

Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Page 4
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
ASSEMBLING THE MIXING ARMS ( HOOK; PADDLE AND WHISK )
-Turn off the machine at switch ( i ) and disconnect the Mixer from the power supply.
-Rotate the handle ( e ) clockwise to release the locking mechanism . This will allow the mixing head ( a )
to rise automatically and will expose the mixing arms.
-When the mixing head has been raised (aprox 45 deg.) release the handle ( e ) and secure it in the verti-
cal position.
-Insert the keyed shaft of the mixing arm ( d ) into the mating end of the mixing axle ( c ). Rotate the mix-
ing arm to the left until the keyed shaft is fully home and secure.
-Rotate the handle ( e ) anti-clockwise to the horizontal position to allow the mixing head to move down.
Push the mixing head down until it locks into position.
-When locked the handle will move to the vertical position. Do not operate the mixer unless the handle is
in the, locked, vertical position.
-To remove the mixing arm, reverse the above procedure.
a) Mixer head d) Agitator g) Base
b) Interception (select
models) e) Handle h) Speed Control
c) Mixing Axle f) Mixing Bowl i) Switch

Page 5
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
MIXING ARM ADJUSTMENT:
The height of the mixing arm may be adjusted to change the clearance between the arm and the base of
the mixing bowl.
-Turn off the machine at switch ( i ) and disconnect the Mixer from the power supply.
-Use a suitable spanner to release the nut on the end of the mixing arm shaft.
-The shaft can now be rotated to adjust the installed height of the mixing arm. Rotate the shaft clockwise
to increase the bowl clearance and anti clockwise to decrease the bowl clearance.
-Once the correct clearance has been achieved, securely tighten the nut and fit the mixing arm as
described on page 4.
FITTING THE MIXING BOWL:
The mixing bowl must be securely fixed to the base of the machine in order for the mixer to operate cor-
rectly.
-Turn off the machine at switch ( i ) and disconnect the Mixer from the power supply.
-Rotate the handle ( e ) clockwise to release the locking mechanism . This will allow the mixing head ( a )
to rise automatically and will expose the mixing arms.
-When the mixing head has been raised (aprox 45 deg.) release the handle ( e ) and secure it in the verti-
cal position.
-While holding the bowl ( f ) with both hands, fit it to the base of the mixer ( g ) .
-Rotate the bowl clockwise until it is firmly secured in place.
-Rotate the handle ( e ) anti-clockwise to the horizontal position to allow the mixing head to move down.
Push the mixing head down until it locks into position.
-When locked, the handle will move to the vertical position. Do not operate the mixer unless the handle is

Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Page 6
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
SPEED CONTROL:
The kitchen mixer is fitted with an infinitely variable speed control switch ( h ) located on the side of the
mixer. The speed of mixing will be determined by the type of mixing arm fitted and the consistency of the
food being mixed. It may be necessary to change the speed during the course of mixing, if the properties of
the food being mixed changes. eg. when a liquid begins to thicken the speed must be reduced.
WARNING:
When mixing ingredients, it is important to to start with a slow speed and gradually increase the speed until
the desired mixing rate is achieved. It is important not to overburden the mixer by using an inappropriate
speed, which is too high for the foodstuffs being mixed. Failure to follow this procedure will damage the
mixer.
STARTING:
-Ensure the mixing head is secured in the lowered position and the handle ( e ) is in the vertical position.
-Check that all components are correctly fixed to the mixer and that all safety guards are in place.
-Set the speed control to the zero ‘o’ position (ref 3-1)
-Turn on the power switch ( i ).
-As you rotate the speed switch in a clockwise direction the mixing speed will increase.
-For low speed mixing and when using the Hook arm the switch sholud be set at the near vertical position
(ref 3-2)
-For medium speed mixing and when using the Paddle arm the switch should be rotated to aprox 45 deg.
(ref 3-3).
-For high speed mixing and when using the Whisk arm the switch should be rotated to the horizontal posi-
tion, or higher (ref 3-4)

Page 7
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
CLEANING;
It is most important to maintain a proper cleaning and hygeine routine with this food mixer. In order to
avoid the cross contamination of different foodstuffs it is important to clean the mixing arms and mixing
bowl after each use.
-Do not use strong cleaning agents that may leave a taste in the bowl and on the mixing arms.
-Thoroughly rinse and dry the Mixing arms and bowl after washing.
-Clean the mixer’s external surfaces with a mixture of mild soap and warm water.
-Clean up all food spills.
-The mixer must not be cleaned with a water jet.
-Do not leave food in the mixer for long periods of time.
MAINTENANCE:
-From time to time it may be necessary to adjust the clearance between the mixing arms and the mixing
bowl, see page 5 for instructions.
-As a safety measure the drive belt is designed to slip under heavy loads and offers protection to the
motor if the mixing arms become jammed. The belt is a consumable item and may need to be replaced, it
is recommended to have a spare on hand.
-Service, by a Birko authorised agent, should be performed at least once a year.
Model 1005004
Capacity
7 Litres
Mixing Speed 40-260rpm
Rotation 147-917rpm
Voltage 220 - 240V
Frequency 50Hz
Power 355W
Current 2.5A
Max Weight (eggs) 500g
Max Weight (Dough) 1200g (Dry flour)
Weight 22kg
Cleaning and Maintenance
Specifications

Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Page 8
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Parts list
Part
No.
Description Item Part No. Description
1 Root Plane 29 1315225 Adjusting Screw
2 Contain Oil Bear-
ing
30 Electric Cable Plug
3 Middle Axle 31 Electric Wire
4 Large Gear 32 1315226 Speed Adjusting Button
5 Bearing 33 1315227 Solenoid Switch
6 1315221 Seal 34 1315228 Circuit Plate
7 Center Axle 35 Electronic Box
8 Planet Gear 36 Base Plate
9 Inner Gear 37 Rubber Mat
10 1315222 Bearing 38 Mixing Bowl
11 Middle Axle 39 Hook Shape Mixing Agitator
12 Large Belt Wheel 40 Paddle Shape Mixing Agita-
tor
13 Nut 41 1315229 Whisk Shape Mixing Agitator
14 1315223 Belt 42 Pin
15 Top Cover 43 1315230 Connecting Axle
16 Small Belt Wheel 44 Main Axle Cover
17 1315224 Motor 45 1315231 Seal
18 Axle Of Belt
Wheel
46 Adorning Cover
19 Transfer Gear 47 1315232 Cushion
20 Driving Gear 48 1315233 Spring Cushion
21 Body 49 1315234 Nut
22 Name Plate 50 Orientation Pin
23 Axle Pin 51 Protection net
24 Handle 52 Speed control switch as-
sembly
25 Support Pin 53 Micro Switch
26 Overturn Seat 54 Tape
27 Supper Plane 55 Brushes
28 Base Plane 56 Micro Switch II

Page 9
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Exploded diagram

Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Page 10
Kitchen Mixer 6001057 - October 2013 v1.05
7
Litre
Wiring diagram

Page 11
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
ISSUE
Not working
CAUSE SOLUTION
No Power Check Power supply
Speed slector in wrong posi-
tion Select the Zero ‘o’ position
Mixer too hot and speed decreasing
Incorrect voltage Check Voltage supply
Mixing load too large Reduce the mixture quantity
Wrong mixing arm Fit the correct mixing arm
Worn drive belt replace the drive belt
Mixer stops while working
Mixing load too large Reduce the mixture quantity
Incorrect voltage Check voltage supply
Main fuse has blown Replace fuse. If problem persists call
Birko for service
Mixing time too long Shorten mixing time. Wait a few min-
utes before re-starting
Speed switch is out of alignment Control knob is loose Tighten the control knob locking
screw
Control Knob is broken Call Birko for service
Mixing arms touch the bowl Height of the arms is incorrect Adjust the arm height (see p5)
Troubleshooting
In order to help preserve our environment we ask that you dispose of this product correctly. Please con-
tact your local city council for collection centre details
End of life disposal

Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Page 12
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer Model: 1005004
7 Litre
BIRKO
Birko Heaters Australia Pty Ltd.,
ABN 39 103 881 625
67 Allingham St, Condell Park, N.S.W. 2200, AUSTRALIA.
International Ph: [phone]
International Fax: [phone]
Local Ph: 1300 724 955, Local Fax: [phone]
[email protected], www.birkoheaters.com
The term ‘Birko’ is a registered trade mark of Birko Heaters Australia Pty Ltd.
Contact Details
As Birko policy is one of continuous product improvement, changes to specifications may be made with-
out prior notice. Images in this booklet have been modified and may not be true representations of the
finished goods
Zenith Heaters Limited,
IRD No. 95 640 729
Unit 2/15 Moselle Avenue,
Henderson.
Auckland. 0610
NEW ZEALAND.
Telephone: [phone]
Facsimile: 0800 559055
www.zenithheaters.co.nz